Numerical models of the general circulation, climate and weather prediction

2004 ◽  
pp. 202-216
2021 ◽  
Vol 12 (1) ◽  
Author(s):  
H. Kim ◽  
Y. G. Ham ◽  
Y. S. Joo ◽  
S. W. Son

AbstractProducing accurate weather prediction beyond two weeks is an urgent challenge due to its ever-increasing socioeconomic value. The Madden-Julian Oscillation (MJO), a planetary-scale tropical convective system, serves as a primary source of global subseasonal (i.e., targeting three to four weeks) predictability. During the past decades, operational forecasting systems have improved substantially, while the MJO prediction skill has not yet reached its potential predictability, partly due to the systematic errors caused by imperfect numerical models. Here, to improve the MJO prediction skill, we blend the state-of-the-art dynamical forecasts and observations with a Deep Learning bias correction method. With Deep Learning bias correction, multi-model forecast errors in MJO amplitude and phase averaged over four weeks are significantly reduced by about 90% and 77%, respectively. Most models show the greatest improvement for MJO events starting from the Indian Ocean and crossing the Maritime Continent.


Author(s):  
Di Xian ◽  
Peng Zhang ◽  
Ling Gao ◽  
Ruijing Sun ◽  
Haizhen Zhang ◽  
...  

AbstractFollowing the progress of satellite data assimilation in the 1990s, the combination of meteorological satellites and numerical models has changed the way scientists understand the earth. With the evolution of numerical weather prediction models and earth system models, meteorological satellites will play a more important role in earth sciences in the future. As part of the space-based infrastructure, the Fengyun (FY) meteorological satellites have contributed to earth science sustainability studies through an open data policy and stable data quality since the first launch of the FY-1A satellite in 1988. The capability of earth system monitoring was greatly enhanced after the second-generation polar orbiting FY-3 satellites and geostationary orbiting FY-4 satellites were developed. Meanwhile, the quality of the products generated from the FY-3 and FY-4 satellites is comparable to the well-known MODIS products. FY satellite data has been utilized broadly in weather forecasting, climate and climate change investigations, environmental disaster monitoring, etc. This article reviews the instruments mounted on the FY satellites. Sensor-dependent level 1 products (radiance data) and inversion algorithm-dependent level 2 products (geophysical parameters) are introduced. As an example, some typical geophysical parameters, such as wildfires, lightning, vegetation indices, aerosol products, soil moisture, and precipitation estimation have been demonstrated and validated by in-situ observations and other well-known satellite products. To help users access the FY products, a set of data sharing systems has been developed and operated. The newly developed data sharing system based on cloud technology has been illustrated to improve the efficiency of data delivery.


2015 ◽  
Vol 72 (1) ◽  
pp. 55-74 ◽  
Author(s):  
Qiang Deng ◽  
Boualem Khouider ◽  
Andrew J. Majda

Abstract The representation of the Madden–Julian oscillation (MJO) is still a challenge for numerical weather prediction and general circulation models (GCMs) because of the inadequate treatment of convection and the associated interactions across scales by the underlying cumulus parameterizations. One new promising direction is the use of the stochastic multicloud model (SMCM) that has been designed specifically to capture the missing variability due to unresolved processes of convection and their impact on the large-scale flow. The SMCM specifically models the area fractions of the three cloud types (congestus, deep, and stratiform) that characterize organized convective systems on all scales. The SMCM captures the stochastic behavior of these three cloud types via a judiciously constructed Markov birth–death process using a particle interacting lattice model. The SMCM has been successfully applied for convectively coupled waves in a simplified primitive equation model and validated against radar data of tropical precipitation. In this work, the authors use for the first time the SMCM in a GCM. The authors build on previous work of coupling the High-Order Methods Modeling Environment (HOMME) NCAR GCM to a simple multicloud model. The authors tested the new SMCM-HOMME model in the parameter regime considered previously and found that the stochastic model drastically improves the results of the deterministic model. Clear MJO-like structures with many realistic features from nature are reproduced by SMCM-HOMME in the physically relevant parameter regime including wave trains of MJOs that organize intermittently in time. Also one of the caveats of the deterministic simulation of requiring a doubling of the moisture background is not required anymore.


2007 ◽  
Vol 64 (11) ◽  
pp. 3766-3784 ◽  
Author(s):  
Philippe Lopez

Abstract This paper first reviews the current status, issues, and limitations of the parameterizations of atmospheric large-scale and convective moist processes that are used in numerical weather prediction and climate general circulation models. Both large-scale (resolved) and convective (subgrid scale) moist processes are dealt with. Then, the general question of the inclusion of diabatic processes in variational data assimilation systems is addressed. The focus is put on linearity and resolution issues, the specification of model and observation error statistics, the formulation of the control vector, and the problems specific to the assimilation of observations directly affected by clouds and precipitation.


2011 ◽  
Vol 11 (6) ◽  
pp. 2569-2583 ◽  
Author(s):  
H. He ◽  
D. W. Tarasick ◽  
W. K. Hocking ◽  
T. K. Carey-Smith ◽  
Y. Rochon ◽  
...  

Abstract. Twice-daily ozonesondes were launched from Harrow, in southwestern Ontario, Canada, during the BAQS-Met (Border Air Quality and Meteorology Study) field campaign in June and July of 2007. A co-located radar windprofiler measured tropopause height continuously. These data, in combination with continuous surface ozone measurements and geo-statistical interpolation of satellite ozone observations, present a consistent picture and indicate that a number of significant ozone enhancements in the troposphere were observed that were the result of stratospheric intrusion events. The combined observations have also been compared with results from two Environment Canada numerical models, the operational weather prediction model GEM (as input to FLEXPART), and a new version of the regional air quality model AURAMS, in order to examine the ability of these models to accurately represent sporadic cross-tropopause ozone transport events. The models appear to reproduce intrusion events with some skill, implying that GEM dynamics (which also drive AURAMS) are able to represent such events well. There are important differences in the quantitative comparison, however; in particular, the poor vertical resolution of AURAMS around the tropopause causes it to bring down too much ozone in individual intrusions. These campaign results imply that stratospheric intrusions are important to the ozone budget of the mid-latitude troposphere, and appear to be responsible for much of the variability of ozone in the free troposphere. GEM-FLEXPART calculations indicate that stratospheric ozone intrusions contributed significantly to surface ozone on several occasions during the BAQS-Met campaign, and made a moderate but significant contribution to the overall tropospheric ozone budget.


Atmosphere ◽  
2019 ◽  
Vol 10 (4) ◽  
pp. 179 ◽  
Author(s):  
Yuanfu Xie

Z-grid finite volume models conserve all-scalar quantities as well as energy and potential enstrophy and yield better dispersion relations for shallow water equations than other finite volume models, such as C-grid and C-D grid models; however, they are more expensive to implement. During each time integration, a Z-grid model must solve Poisson equations to convert its vorticity and divergence to a stream function and velocity potential, respectively. To optimally utilize these conversions, we propose a model in which the stability and possibly accuracy on the sphere are improved by introducing more stencils, such that a generalized Z-grid model can utilize longer time-integration steps and reduce computing time. Further, we analyzed the proposed model’s dispersion relation and compared it to that of the original Z-grid model for a linearly rotating shallow water equation, an important property for numerical models solving primitive equations. The analysis results suggest a means of balancing stability and dispersion. Our numerical results also show that the proposed Z-grid model for a shallow water equation is more stable and efficient than the original Z-grid model, increasing the time steps by more than 1.4 times.


2012 ◽  
Vol 5 (1) ◽  
pp. 87-110 ◽  
Author(s):  
A. Kerkweg ◽  
P. Jöckel

Abstract. The numerical weather prediction model of the Consortium for Small Scale Modelling (COSMO), maintained by the German weather service (DWD), is connected with the Modular Earth Submodel System (MESSy). This effort is undertaken in preparation of a new, limited-area atmospheric chemistry model. Limited-area models require lateral boundary conditions for all prognostic variables. Therefore the quality of a regional chemistry model is expected to improve, if boundary conditions for the chemical constituents are provided by the driving model in consistence with the meteorological boundary conditions. The new developed model is as consistent as possible, with respect to atmospheric chemistry and related processes, with a previously developed global atmospheric chemistry general circulation model: the ECHAM/MESSy Atmospheric Chemistry (EMAC) model. The combined system constitutes a new research tool, bridging the global to the meso-γ scale for atmospheric chemistry research. MESSy provides the infrastructure and includes, among others, the process and diagnostic submodels for atmospheric chemistry simulations. Furthermore, MESSy is highly flexible allowing model setups with tailor made complexity, depending on the scientific question. Here, the connection of the MESSy infrastructure to the COSMO model is documented and also the code changes required for the generalisation of regular MESSy submodels. Moreover, previously published prototype submodels for simplified tracer studies are generalised to be plugged-in and used in the global and the limited-area model. They are used to evaluate the TRACER interface implementation in the new COSMO/MESSy model system and the tracer transport characteristics, an important prerequisite for future atmospheric chemistry applications. A supplementary document with further details on the technical implementation of the MESSy interface into COSMO with a complete list of modifications to the COSMO code is provided.


2012 ◽  
Vol 140 (8) ◽  
pp. 2689-2705 ◽  
Author(s):  
Marc Berenguer ◽  
Madalina Surcel ◽  
Isztar Zawadzki ◽  
Ming Xue ◽  
Fanyou Kong

Abstract This second part of a two-paper series compares deterministic precipitation forecasts from the Storm-Scale Ensemble Forecast System (4-km grid) run during the 2008 NOAA Hazardous Weather Testbed (HWT) Spring Experiment, and from the Canadian Global Environmental Multiscale (GEM) model (15 km), in terms of their ability to reproduce the average diurnal cycle of precipitation during spring 2008. Moreover, radar-based nowcasts generated with the McGill Algorithm for Precipitation Nowcasting Using Semi-Lagrangian Extrapolation (MAPLE) are analyzed to quantify the portion of the diurnal cycle explained by the motion of precipitation systems, and to evaluate the potential of the NWP models for very short-term forecasting. The observed diurnal cycle of precipitation during spring 2008 is characterized by the dominance of the 24-h harmonic, which shifts with longitude, consistent with precipitation traveling across the continent. Time–longitude diagrams show that the analyzed NWP models partially reproduce this signal, but show more variability in the timing of initiation in the zonal motion of the precipitation systems than observed from radar. Traditional skill scores show that the radar data assimilation is the main reason for differences in model performance, while the analyzed models that do not assimilate radar observations have very similar skill. The analysis of MAPLE forecasts confirms that the motion of precipitation systems is responsible for the dominance of the 24-h harmonic in the longitudinal range 103°–85°W, where 8-h MAPLE forecasts initialized at 0100, 0900, and 1700 UTC successfully reproduce the eastward motion of rainfall systems. Also, on average, MAPLE outperforms radar data assimilating models for the 3–4 h after initialization, and nonradar data assimilating models for up to 5 h after initialization.


Sign in / Sign up

Export Citation Format

Share Document