Burnt Offerings: Challenging Modern Work Efficiency

Keyword(s):  
2019 ◽  
Vol 3 (01) ◽  
pp. 73-84
Author(s):  
Barnad Barnad

The development of computer technology and information and communication technology has entered all aspects of life both personally and business institutions such as offices. Work behavior patterns that still apply traditional offices with modern office equipment only produce work effectiveness, but have not produced work efficiency. In this paper, we will describe the results of traditional work behavior patterns, especially the use of wasteful paper, and how to make the most of information technology that has been owned to change traditional behavior patterns into modern ones which will result in a maximum reduction in paper use. Thus the achievement of work productivity is not only in the form of work effectiveness, but work efficiency can be achieved by applying modern work behavior. This change in work behavior indirectly plays a role in helping to improve the environment, because each sheet of paper used is the result of logging as the main ingredient. The application of modern work behavior patterns will have a significant impact if carried out jointly and thoroughly at each office.


2011 ◽  
Vol 33 (1-2) ◽  
pp. 67-78
Author(s):  
Jim Mearns

This paper reviews the use of sources in archaeological research, with particular reference to antiquarian material. Specific attention is paid to antiquarian texts by the Rev. David Ure and Mr Hugh MacDonald relating mainly to the site of Queen Mary's Cairn, Cathkin Braes, south-east of Glasgow. Brief biographical information is provided about the two antiquaries and their different approaches to recording sites discussed. The paper also looks at more recent work on the area and compares the modern approaches to reporting with the antiquarian and notes the uses of antiquarian sources in modern work.


2020 ◽  
Vol 140 (6) ◽  
pp. 338-339
Author(s):  
Hirofumi Sanada ◽  
Naofumi Wada ◽  
Megumi Takezawa ◽  
Hiroki Matsuzaki
Keyword(s):  

Author(s):  
С.А. Демидов

Рассматриваются возможности применения системы машин модульно-блочного типа в перспективных технологиях лесосечных работ, а также проблемы машинного парка лесозаготовительных предприятий России. Цель исследования - изучение структуры и особенностей эксплуатации системы лесных машин модульно блочного типа в современных условиях лесозаготовок с перспективой применения на ближайшее будущее. Для улучшения технологии проведения лесосечных работ и повышения экономической эффективности лесопромышленного комплекса предлагается провести ряд важных технических и технологических изменений. Одним из решений проблемы по улучшению эффективности работы является разработка и внедрение комплекса лесных машин, основанного на принципе эксплуатационной модульности. Это будет гарантировать технологическую гибкость производства, предоставит высокую производительность и обеспечит совместимость с окружающей средой. Приведен принцип устройства машин модульно-блочного типа с разделением функций между транспортными и технологическими модулями. Представлены графически классификация модулей по их назначению и концепция компоновки системы машин модульно-блочного типа, а также главный модуль (энергетический) и несколько технологических модулей, способных выполнять различные технологические операции в зависимости от условий и технологии производства. Как показал анализ рынка, наиболее перспективным направлением по улучшению механизации лесного парка машин является создание комплекса модульно-блочных машин на базе колесного трактора, оснащенных гидрообъемными передачами. Это делает конструкцию машины более гибкой и мобильной. Принцип формирования и работы модульной системы машин с многофункциональным технологическим оборудованием рассматривается в качестве перспективного направления по улучшению лесозаготовительного процесса. The article deals with the prospects for the use of machines modular block type in the advanced technology logging activities, as well as the machinery problems of logging enterprises in Russia. The research objective. The study of the structure and operating characteristics of a system of forest modular block type machines in current conditions with the prospect of their application in the nearest future. It is necessary that a number of important technical and technological changes should be made to improve the technology of logging operations and increase the economic efficiency of timber industry complex. One of the solutions to improve work efficiency is the development and introduction of forest machines based on the principle of operational modularity. It will ensure the flexibility of the production process, provide high work efficiency and, what counts, will be environmentally friendly. The article gives the description of the principle of the machine module block type, as well as the functions and how they are divided between the two modules. There are two pictures in the article. The first picture gives the classification of modules according to their application. The second picture shows the principle of arrangement of modular machine-block type. Both the main energetic module and some technological modules capable of performing processing steps depending on the conditions and production technology are presented. According to the market analysis that shows that the most promising direction to improve the mechanization of forest machinery is to create a complex modular block machines on the base of a wheeled tractor equipped with hydrostatic transmission. It will make the machine design more flexible and mobile. The principle of formation and operation of the modular system with multi-function machines process equipment is considered as a promising direction for improvement of the process of logging.


2020 ◽  
Vol 179 ◽  
pp. 02101
Author(s):  
Jiao Hu ◽  
Qing Yin ◽  
Canqun He

In the daily work of office workers, the comfort of the office chair has a great impact on the staff’s work efficiency and human health. Sitting on the office chair for a long time may cause diseases such as cervical, shoulder, and lumbar spine. This article uses online literature research, brand analysis, and offline field research to understand the current status and deficiencies of office chairs, find design points and design directions, and based on ergonomics and sitting analysis research, design general office chairs for female white-collar workers to achieve a comfortable and healthy office purpose.


2021 ◽  
Vol 58 (4) ◽  
pp. 103462
Author(s):  
Xueping Yang ◽  
Hua (Jonathan) Ye ◽  
Xinwei Wang

ITNOW ◽  
2020 ◽  
Vol 62 (4) ◽  
pp. 56-57
Author(s):  
Johanna Hamilton

Abstract Trevor Hall, Community Lead for Architecture and Operations at the Financial Conduct Authority (FCA) talks to Johanna Hamilton AMBCS about a new model for work efficiency, prioritising people development and how awards reflect team excellence.


2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
M Triantafyllou ◽  
R Monteiro ◽  
A Protonotarios ◽  
T Gossios ◽  
P Elliott ◽  
...  

Abstract Introduction Early detection of affected family relatives of patients with dilated cardiomyopathy (DCM) is essential in order to guide follow up, outcomes and initiate early treatment. Myocardial work analysis is a novel method which integrated strain imaging and blood pressure and has the potential to identify patients with subclinical disease. Purpose We analysed myocardial work in family relatives of DCM patients with positive genotype but negative phenotype in order to identify whether myocardial work can identify early changes. Methods Seventy-four family relatives of DCM patients attending for screening were examined. All individuals were asymptomatic with either positive (45/74, G+) or negative (29/74, G-) genotype and no echocardiographic evidence of left ventricular dilatation or systolic impairment. Non-invasive myocardial work analysis using two-dimensional (2D) speckle tracking echocardiography was analysed. Global longitudinal strain (GLS) was measured by the same vendor specific software used for myocardial work analysis. Left ventricular (LV) ejection fraction (EF) was measured with the Simpson's biplane method. The peak systolic arm cuff blood pressure (BP) measurement at the time of echocardiography was used for the myocardial work study. Results In total we included 74 individuals (37±15 years old, 50.7% women) with mean systolic and diastolic BP of 121.3±14 and 73.2±10 mmHg respectively, mean EF was 58±5% and mean GLS at 18.4±2.5%. G+ individuals had pathogenic and very likely pathogenic mutations in 8 different genes (TTN, BAG3, DSP, FLNC, LMNA, DMD, RBM20, TPM1). There was no difference in age, systemic hypertension, diabetes or medical treatment between the 2 groups. No significant difference was found among G+ and G- individuals in mean systolic and diastolic BP (121.2±14.7 vs 121.2±15.2 mmHg), mean EF (57.3±5 vs 59.1±4%), GLS (−18.2±1.5 vs −18.6±2.9%), mean global work index (1818±403 vs 1928±295 mmHg%) and global constructive work (2192±464 vs 2260±318 mmHg%). However, we found significant reduction of the global work efficiency (GWE) with a GWE of 94.4±2.7% in the G+ versus 95.9±1.6% in the G- individuals (p 0.02). Moreover, the global wasted work (GWW) was increased in the G+ with a GWW of 111±58 mmHg% versus 82±41 mmHg% in the G- individuals (p 0.03). Conclusion DCM gene carriers show, early on, decreased myocardial work efficiency and increased wasted work compared to unaffected family members, which appears to be earlier than other parameters such as EF and GLS. Myocardial work analysis could potentially recognize individuals showing early cardiac involvement and guide closer follow up and early initiation of treatment. Funding Acknowledgement Type of funding source: None


Sign in / Sign up

Export Citation Format

Share Document