scholarly journals Arduino Based Smart Load control

2020 ◽  
Vol 5 (3) ◽  
pp. 53-57

Power Failure in the power system is mainly due to the overloading. The possible damage to the area is losing a power. The Arduino Uno based load control system is a device which automatically control overload on generator by controlling power and cut-off supply whenever consumers exceeds the amount of power supplied for peak period. This is achieved by Arduino Uno, which detect overload and simultaneously cut-off the supply for the period of generator overloading. In this paper system can be automated into two stages are monitoring function and controlling function. In Monitoring function it has to record the meter reading at different location in the system, for normal as well as overload condition which is required for system planning. Distribution Supervisory control and Data Acquisition System (DSCADA) performs some of these monitoring function and controlling function about switching operation that is controlling of relay circuit breaker. The function Impacts on Consumer as well as reliability. The research work to be aimed at developing local full scale distribution automation system which can be control from secondary distribution substation to the consumer end. Power distribution automation expected for the broad areas. The project aimed at uninterrupted power supply for loyal energy consumer by implementation of this the problem of interruption off power supply due to energy misusing consumer can be avoided. This system provides the reliable operation at consumer end.

2008 ◽  
Vol 45 (4) ◽  
pp. 336-355 ◽  
Author(s):  
R. P. Gupta ◽  
S. C. Srivastava

This paper presents the design and development of a scaled down physical model for power Distribution Automation (DA) system simulation. The developed DA system simulator is useful in providing hands-on experience to utility engineers/managers to familiarise themselves with the DA system and gain confidence in managing the power distribution system from the computer aided distribution control centre. The distribution automation system simulator can be effectively used to carry out further research work in this area. This also helps undergraduate and graduate students to understand power distribution automation technology in the laboratory environment.


2010 ◽  
Vol 45 (3) ◽  
pp. 205-218 ◽  
Author(s):  
Hari Kumar Naidu ◽  
K Thanushkodi

The objective of the study in this paper is to evaluate the advances in telecommunication, Information Technology and networking which offer SCADA Power supply Distribution automation as a solution to improve power distribution efficiencies. This paper also discusses the result of the indigenously developed prototype hardware and software model utilising the latest embedded technology innovation for SCADA Power Distribution Automation Systems for reliable performance of power system. Keywords: SCADA; Distribution management system; GIS, Distribution automation; Embedded system. DOI: 10.3329/bjsir.v45i3.1531Bangladesh J. Sci. Ind. Res. 45(3), 205-218, 2010


2015 ◽  
Vol 737 ◽  
pp. 214-219
Author(s):  
Peng Li ◽  
Kai Ding ◽  
Xin Shu ◽  
Gui Tong Guo

In this paper, based on the requirements of distribution automation system (DAS), the testing method of performance index of remote terminal unit is studied. The standardized test method and testing process with automatic test is discussed. The paper also brings forward a set of feasible testing and evaluation method on the distribution automation terminal device to ensure the safe and stable running of power distribution automation terminal.


2013 ◽  
Vol 415 ◽  
pp. 34-37
Author(s):  
Yu Li ◽  
Xiu Ying Tang ◽  
Xue Mei Leng ◽  
Yun Jiang Xu

Urbanization construction requirements of smart grid,and distribution automation is the foundation of smart grid.Because of its own characteristics of the rural power grid, the construction of distribution network is not the same of city construction. This paper from the rural development trend and its characteristics, analysis of the function of rural distribution automation system, and put forward the suitable for rural distribution automation mode from the aspects of main station system,substation,distribution terminal,communication system and feeder automation of several.


2013 ◽  
Vol 340 ◽  
pp. 1034-1038
Author(s):  
Yang Jia ◽  
Qiang Fu ◽  
Du Shi Ma ◽  
Ming Yang Zhu

Not only distribution automation system but the principle of the existing means of communication are studied systematically and distribution automation communication system model based on IP network is provided. Backbone network is set between master station in the control center and substation sub-station. Communication between electronic station and terminal connections rely on the branch network. Simulation experiment shows the test of data traffic and network delay of IP communications network. In the actual network environment the data refresh meet the application requirements. So the program on the improvement of distribution automation communication in this article is feasible.


Sign in / Sign up

Export Citation Format

Share Document