scholarly journals FURTHER STUDIES ON THE MOSAIC OF THE SUGARCANE VARIETY MAYAGUEZ 336

1969 ◽  
Vol 38 (1) ◽  
pp. 16-21
Author(s):  
José Adsuar
Keyword(s):  
Physical Properties ◽  
Mosaic Virus ◽  
Comparative Studies ◽  
Room Temperature ◽  
Sugarcane Mosaic Virus ◽  
Sugarcane Variety ◽  
End Point

Transmission of the mosaic virus present on the sugarcane variety M. 336 is reported. The virus was transmitted mechanically from mosaic-infected M. 336 to the varieties, B.H. 10-12, Sta. Cruz. 12/4, and C.P. 29-291. No transmissions were obtained to the varieties P.O.J. 2878 and P.R. 902, which are resistant to the sugarcane-mosaic virus. The mosaic symptoms produced by the YM-336 virus on B.H. 10-12, Sta. Cruz 12/4, Co. 281, and C.P. 29-291 were indistinguishable from the symptoms produced on these same varieties by the sugarcane-mosaic virus. Comparative studies were made of the physical properties of the M. 336 mosaic virus and the sugarcane-mosaic virus obtained from B.H. 10-12. No differences were observed in the properties of the two viruses. Both were inactivated at a temperature of around 45°C, had a dilution end point of 1:10, and did not survive for more than 24 hours at room temperature. The YM-336 virus was transmitted successfully by means of the corn aphid, A. maidis Fitch, from infected sorghum, B.H. 10-12, and Sta. Cruz 12/4 to the variety M. 336.

scholarly journals Studies on virus diseases of papaya (carica papaya) in Puerto Rico III. Property studies of papaya mosaic viruss

1969 ◽  
Vol 31 (3) ◽  
pp. 260-264
Author(s):  
José Adsuar
Keyword(s):  
Puerto Rico ◽  
Physical Properties ◽  
Mosaic Virus ◽  
Room Temperature ◽  
Carica Papaya ◽  
Virus Diseases ◽  
Minute Exposure ◽  
Papaya Mosaic Virus

The physical properties of papaya mosaic virus are reported. The virus is inactivated by a 10-minute exposure at 60°C. No infection was obtained when juice was diluted up to 1:1000. The virus was completely inactivated in 48 hours at room temperature. Filterability was accomplished but with difficulty through a Seitz germicide filter. The virus was found to lose its infectivity in the leaves when air dried for 48 hours. Aphis spiraeeola Patch retained the virus the first 3 hours but failed to infect a second lot of plants after that time.

Improved Sol-Gel Materials for Efficient Solid State Dye Lasers

1993 ◽  
Vol 329 ◽  
Author(s):  
Michael Canva ◽  
Patrick Georges ◽  
Jean-Fran^ois Perelgritz ◽  
Alain Brun ◽  
Fréddric Chaput ◽  
...  
Keyword(s):  
Solid State ◽  
Physical Properties ◽  
Room Temperature ◽  
Sol Gel ◽  
Tunable Lasers ◽  
Optical Quality ◽  
Dye Lasers ◽  
Laser Dyes ◽  
Host Matrix ◽  
Host Matrices

AbstractPhotoresistant laser dyes were trapped in silica based xerogel host matrices to obtain solid state tunable lasers. For this purpose very dense xerogel samples with improved chemical and physical properties were prepared at room temperature by the sol-gel technology. The as-prepared materials were polished to obtain optical quality surfaces and were used as new lasing media.Lasing action of such different dyes as rhodamine, perylene and pyrromethene doping dense sol-gel matrices was demonstrated. Efficiencies of 30 % or lifetimes of more than 100,000 shots were achieved with different new ≤dye dopant/host matrix≥ couples. Their different performances are reviewed and discussed.

HAYNES STELLITE ALLOY No. 98M2

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Physical Properties ◽  
Room Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
The Other ◽  
Stellite Alloy ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract HAYNES STELLITE 98M2 Alloy is a cobalt-base alloy having higher compressive strength and higher hardness than all the other cobalt-base alloys at room temperature and in the red heat range. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: Co-22. Producer or source: Haynes Stellite Company.

FANSTEEL 85 METAL

Alloy Digest ◽  
1981 ◽  
Vol 30 (6) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Creep Strength ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Good Combination ◽  
Bend Strength ◽  
Temperature Performance

Abstract FANSTEEL 85 METAL is a columbium-base alloy characterized by good fabricability at room temperature, good weldability and a good combination of creep strength and oxidation resistance at elevated temperatures. Its applications include missile and rocket components and many other high-temperature parts. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, tensile properties, and bend strength as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cb-7. Producer or source: Fansteel Metallurgical Corporation. Originally published December 1963, revised June 1981.

MAGNESIUM ZK61A

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Room Temperature ◽  
Heat Treating ◽  
Strength Properties ◽  
Casting Alloy ◽  
Chemical Company ◽  
Casting Alloys ◽  
Magnesium Casting

Abstract Magnesium ZK61A is a heat treatable sand casting alloy offering higher strength properties for room-temperature applications than other magnesium casting alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-67. Producer or source: The Dow Chemical Company.

MAGNESIUM AZ31B

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
High Temperature ◽  
Magnesium Alloy ◽  
Physical Properties ◽  
Room Temperature ◽  
Heat Treating ◽  
General Purpose ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Wrought Magnesium Alloy ◽  
Metal Products

Abstract Magnesium AZ31B is a general purpose wrought magnesium alloy for room temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bearing strength as well as creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Mg-53. Producer or source: The Dow Metal Products Company.

DILLIDUR 450V

Alloy Digest ◽  
2011 ◽  
Vol 60 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Room Temperature ◽  
Surface Hardness ◽  
Heat Treating ◽  
Hot Working ◽  
Resistant Steel ◽  
Bend Strength

Abstract Dillidur 450V is a water hardened wear-resistant steel with surface hardness at room temperature of 420-480 HB. The steel is easy to weld and bend. Hot working is not recommended. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-638. Producer or source: Dillinger Hütte GTS.

scholarly journals Maize resistance to Sugarcane mosaic virus

2017 ◽  
Vol 38 (SI 2 - 6th Conf EFPP 2002) ◽  
pp. 542-544
Author(s):  
R. Pokorný ◽  
M. Porubová
Keyword(s):  
Mosaic Virus ◽  
Systemic Infection ◽  
Sugarcane Mosaic Virus ◽  
Resistant Line ◽  
Mechanisms Of Resistance ◽  
Long Distance ◽  
Maize Hybrids ◽  
Resistant Lines ◽  
Maize Resistance ◽  
Long Distance Movement

Under greenhouse conditions 12 maize hybrids derived from crosses of four resistant lines with several lines of different level of susceptibility were evaluated for resistance to Czech isolate of Sugarcane mosaic virus (SCMV). These hybrids were not fully resistant to isolate of SCMV, but the symptoms on their newly growing leaves usually developed 1 to 3 weeks later in comparison with particular susceptible line, the course of infection was significantly slower and rate of infection lower. As for mechanisms of resistance, the presence of SCMV was detected by ELISA in inoculated leaves both of resistant and susceptible lines, but virus was detected 7 days later in resistant line. Systemic infection developed only in susceptible lines. These results indicate restriction of viral long distance movement in the resistant line.

Sign in / Sign up

Export Citation Format

Share Document