Characterizations of calcium silicate hydrates derived from coal fly ash and their mechanisms for phosphate removal

2019 ◽  
Vol 156 ◽  
pp. 78-86
Author(s):  
Quanzhi Tian ◽  
Keiko Sasaki
2014 ◽  
Vol 633 ◽  
pp. 7-10 ◽  
Author(s):  
Jing Yang ◽  
Xin Zhang ◽  
Hong Wen Ma ◽  
Ming Wei Wang ◽  
Han Wu

Extracting aluminum oxide from high-alumina coal fly ash are significant to make up for the inadequacy of bauxite resource in China. How to comprehensively utilize silica components in coal fly ash is a key technical question in industrialization for extracting of alumina from coal fly ash. Desilication of coal fly ash (CFA) and preparation of xonotlite were studied using the silica-rich solution from the CFA as silica source and calcium oxide as calcium source respectively. The CFA is from a power plant at Shizuishan city in Ningxia, China. Xonotlite was successfully prepared by a series processes including predesilication, hydro-thermal synthesis. The experimental results indicated that SiO2in the coal fly ash changed into NaSiO3after the coal fly ash was treated by desilication using NaOH solution. Hydrated calcium silicate was obtained from the reaction of the solutions produced by desilication and Ca (OH)2at the condition of Ca/Si (mol)=1, T=160°Cand t=1h. Xonotlite was synthesized by the hydrated calcium silicate using the hydrothermal temperature of 260°C for 2 hours. Keywords: Coal Fly Ash, Pre-desilication, alkali Hydrothermally-treated, Xonotlite nanofibres


2015 ◽  
Vol 279 ◽  
pp. 777-787 ◽  
Author(s):  
Guangxia Qi ◽  
Xuefei Lei ◽  
Lei Li ◽  
Chao Yuan ◽  
Yinglong Sun ◽  
...  

Fuel ◽  
2009 ◽  
Vol 88 (9) ◽  
pp. 1643-1649 ◽  
Author(s):  
Qingyu Guan ◽  
Xiaozhen Hu ◽  
Deyi Wu ◽  
Xiao Shang ◽  
Chun Ye ◽  
...  

2013 ◽  
Vol 34 (24) ◽  
pp. 3177-3182 ◽  
Author(s):  
Y.R. Wang ◽  
Daniel C.W. Tsang ◽  
William E. Olds ◽  
Paul A. Weber

2021 ◽  
Vol 5 (1) ◽  
pp. 24-35
Author(s):  
Komala Affiyanti Affandi ◽  
Arseto Yekti Bagastyo

The main composition and availability of fly ash cause this waste which has potential as an adsorbent to remove ammonium and phosphate in water. Difference of main composition will cause different removal efficiency. The purposes from this research are to determine optimal condition for removing concentration ammonium and phosphate and to determine the source of fly ash which has great potential for ammonium and phosphate removal in solution. The optimal conditions were carried out by varying pH of solution and adsorbent dosages to remove ammonium and phosphate concentrations in different initial concentrations. Optimum pH of solution in this research is 8 with range of ammonium removal efficiency 8% to 14% and 16% to 75% for removing phosphate which has condition ammonium concentration higher than phosphate. Ammonium concentration lower than phosphate will have a negative effect on the removal. Adsorbent dosage of 4.5 g is able to produce optimal removal efficiency both ammonium and phosphate. From five different sources of fly ash, Punagaya fly ash has the great potential for removal ammonium and phosphate simultaneously which has an adsorption capacity of 7.17 mg/g and 19.50 mg/g for ammonium and phosphate respectively.


2018 ◽  
Vol 85 (3) ◽  
pp. 375-378
Author(s):  
Fei Gao ◽  
Liwen Xiao ◽  
Hongzhou Zhang

The studies described in the Research Communication aimed to describe the feasibility of using coal fly ash to synthesize nano-zeolite, and the ammonium and phosphate adsorption efficiencies of the nanomaterial in dairy wastewater. Chemical treatment of coal fly ash was conducted and changes observed. Samples treated with NaOH had an increased cation exchange capacity and P sorption index compared to the initial fly ash, due to particle modification from smooth surface to plate- and rod-shape crystals, referred to as nano-zeolite. Batch experiments were conducted by mixing coal fly ash and nano-zeolite with synthesized wastewater to study the effect of sorption time, pH values and dosage of nano-zeolite on ammonium and phosphate removal efficiency. The adsorption process reached equilibrium in a very short time (less than 60 min), which suggests a potential for fast immobilization of pollutants. The concentration of ammonium decreased from 118 to 35 mg/l (71% removal) while the concentration of phosphate decreased from 52 to 45 mg/l. The removal efficiency of ammonium was 36·6, 51·8 and 70·9% at pH 3, 7 and 10, respectively whilst that of phosphate increased dramatically with decreased slurry pH (92·1, 47·3 and 12·3% at pH 3, 7 and 10, respectively). Nano-zeolite could be a potential absorbent for fast immobilization of ammonium but not phosphate. Surface modification of nano-zeolite could be introduced in order to enhance the pollutants removal efficiency.


2015 ◽  
Vol 50 (12) ◽  
pp. 1298-1305 ◽  
Author(s):  
Jie Xie ◽  
Li Lai ◽  
Lidan Lin ◽  
Deyi Wu ◽  
Zhenjia Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document