scholarly journals Excess molar volumes, partial molar volumes and isentropic compressibilities of binary systems (ionic liquid + alkanol)

2009 ◽  
Author(s):  
◽  
Precious N. Sibiya
Keyword(s):  
Thermodynamic Properties ◽  
Binary Mixtures ◽  
Intermolecular Interactions ◽  
Binary Systems ◽  
Excess Molar Volumes ◽  
Partial Molar Volumes ◽  
Isentropic Compressibility ◽  
Volume Data ◽  
Specific Chemical ◽  
Molar Volumes

The thermodynamic properties of binary liquid mixtures involving ionic liquids (ILs) with alcohols were determined. ILs are an important class of solvents since they are being investigated as environmentally benign solvents, because of their negligible vapour pressure, and as potential replacement solvents for volatile organic compounds (VOCs) currently used in industries. Alcohols were chosen for this study because they have hydrogen bonding and their interaction with ILs will help in understanding the intermolecular interactions. Also, their thermodynamic properties are used for the development of specific chemical processes. The excess molar volumes of binary mixtures of {1-ethyl-3-methylimidazolium ethylsulfate + methanol or 1-propanol or 2-propanol}, {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, {1-buty-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol} were calculated from experimental density values, at T = (298.15, 303.15 and 313.15) K. The Redlich-Kister smoothing polynomial was fitted to the excess molar volume data. The partial molar volumes of the binary mixtures {1-ethyl-3-methylimidazolium ethylsulfate + methanol or 1-propanol or 2-propanol}, {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, {1-buty-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol} were calculated from the Redlich-Kister coefficients, at T = (298.15, 303.15 and 313.15) K. This information was used to better understand the intermolecular interactions with each solvent at infinite dilution. iii The isentropic compressibility of {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, were calculated from the speed of sound data at T = 298.15 K.

scholarly journals Correlation and prediction of the physical and excess properties of the ionic liquid 1-butyl-3-methylimidazolium methyl sulphate with several alcohols at T= (298.15 to 313.15) K

2013 ◽  
Author(s):  
◽  
Sangeeta Singh
Keyword(s):  
Refractive Index ◽  
Ionic Liquid ◽  
Binary Mixtures ◽  
Binary Systems ◽  
Excess Molar Volumes ◽  
Partial Molar Volumes ◽  
Excess Properties ◽  
Excess Isentropic Compressibilities ◽  
Molar Volumes ◽  
Isentropic Compressibilities

The thermodynamic properties of binary liquid mixtures using an ionic liquid (IL) with alcohols were determined at different temperatures. The ionic liquid used was 1-butyl-3- methylimidazolium methylsulphate [BMIM]+[MeSO4]-. Densities, speed of sound, and refractive indices for the binary mixtures ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or 1-butanol) were experimentally measured over the whole range of composition at T = (298.15, E 303.15, 308.15, and 313.15) K. From the experimental data, excess molar volumes, V m , E , deviations in refractive isentropic compressibilities, κ s , excess isentropic compressibilities, κ S indices, ∆n, and molar refractions, R, were calculated. The excess partial molar volumes were also calculated at T = 298.15 K. For the binary systems, ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or E E E 1-butanol) V m and κ S are always negative and V m decrease slightly when the temperature increases. The refractive index deviation at T = (298.15, 303.15, 308.15, and 313.15) K is positive over the whole composition range. The measured negative values for excess molar volume of these mixtures ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or 1-butanol) indicate strong ion-dipole interactions and packing between alcohols and IL are present. The Redlich-Kister smoothing polynomial equation was satisfactorily applied for the E E fitting of the V m , κ S , and ∆n data to give the fitting parameters and the root-mean-square deviations. The Lorentz-Lorenz (L-L) equation was also used to correlate the volumetric property and predict the density or refractive index of the binary mixtures of ionic liquid and the organic solvents. The Lorentz-Lorenz approximation gives a higher σ when used to correlate the iiiexcess molar volumes for the mixtures ([BMIM]+[MeSO4]- + methanol, or 1-propanol, or 2-propanol, or 1-butanol). The L-L equation gives good results for the prediction of density and refractive index. The results are discussed in terms of solute-solute, solute-solvent and solvent- solvent interactions.

scholarly journals Cibulka correlation for ternary excess molar volumes for [MOA]⁺[Tf₂N]⁻ at different temperatures

2012 ◽  
Author(s):  
◽  
Zikhona Tywabi
Keyword(s):  
Ionic Liquid ◽  
Ethyl Acetate ◽  
Molar Volume ◽  
Intermolecular Interactions ◽  
Excess Molar Volume ◽  
Infinite Dilution ◽  
Excess Molar Volumes ◽  
Volume Data ◽  
Molar Volumes ◽  
Fitting Parameters

In this work, the binary and ternary excess molar volumes have been calculated from the density, ρ, measurements using an Anton Paar (DMA 38) vibrating tube digital densimeter. One component of the ternary systems studied was an ionic liquid. The ionic liquid used is methyl trioctylammonium bis(trifluoromethylsulfonyl)imide [MOA]+[Tf2N]-. Binary excess molar volumes were obtained for (1-butanol + ethyl acetate) and (2-butanol + ethyl acetate) systems at T = (298.15, 303.15, and 313.15) K. Ternary excess molar volumes were obtained for the mixtures {[MOA]+[Tf2N]- + 2-propanol or 1-butanol or 2-butanol + ethyl acetate} at T = (298.15, 303.15, and 313.15) K. The Redlich-Kister equation was fitted to the calculated binary excess molar volume data to obtain the fitting parameters which were used to calculate the partial molar volumes at infinite dilution. The calculated partial molar volume was used to better understand the intermolecular interactions of each component at infinite dilution. The Redlich-Kister parameters were also used in the Cibulka equation and the Cibulka equation was used to correlate the ternary excess molar volume data to give the fitting parameters. The binary excess molar volumes,VmE , for the (1-butanol + ethyl acetate) and (2-butanol + ethyl acetate) are positive at each temperature over the entire composition range. At high mole fractions of the alcohol for the binary systems (2-propanol or 1-butanol or 2-butanol + ethyl acetate), VmE is positive again, similar to the Cibulka ternary correlation. The positive V E m values are due to the breaking of intermolecular interactions in the pure components during the mixing process. The ternary excess molar volume,V E 123 , values are negative for all mole fractions. The negative values are due to a more efficient packing and/ or attractive intermolecular interactions in the mixtures than in the pure liquid. There is also a contraction in volume which can be attributed to electron-donor-acceptor type interactions between the ionic liquid and 2-propanol or 1-butanol or 2-butanol as well as ethyl acetate.

scholarly journals Thermophysical properties of biofuel components derived from biomass

2016 ◽  
Author(s):  
◽  
Mbalenhle B. Nduli
Keyword(s):  
Refractive Index ◽  
Molar Volume ◽  
Binary Mixtures ◽  
Thermophysical Properties ◽  
Excess Molar Volume ◽  
Excess Molar Volumes ◽  
Isentropic Compressibility ◽  
Lorenz Equation ◽  
Molar Volumes ◽  
Increasing Temperature

The thermophysical properties of the binary mixtures containing biofuel components derived from biomass were determined. Experimental densities, speed of sound, and refractive indices for the binary mixtures (methanol or 1-ethyl-3-methylimidazolium acetate [EMIM][OAc] + furfural or furfuryl alcohol ) were measured at T = (298.15, 303.15, 308.15, 313.15 and 318.15) K. From the experimental data, excess molar volume, E m V , isentropic compressibility, s  , molar refractions, R, and deviation in refractive index, Δn, were calculated. The excess molar volumes were found to be negative for all systems studied. The isentropic compressibility were found to be both positive for the whole composition and temperature range and increases slightly with increasing temperature. The deviation in refractive index was positive over the whole composition range. The obtained values of excess molar volumes and changes of refractive index on mixing were satisfactorily correlated by the Redlich–Kister equation. The Lorentz–Lorenz equation was applied to predict the density and calculate the excess molar volume of the binary mixtures.

Sign in / Sign up

Export Citation Format

Share Document