scholarly journals High-resolution simulations of atmospheric CO<sub>2</sub> over complex terrain – representing the Ochsenkopf mountain tall tower

2011 ◽  
Vol 11 (15) ◽  
pp. 7445-7464 ◽  
Author(s):  
D. Pillai ◽  
C. Gerbig ◽  
R. Ahmadov ◽  
C. Rödenbeck ◽  
R. Kretschmer ◽  
...  
Keyword(s):  
High Resolution ◽  
Complex Terrain ◽  
Atmospheric Co2 ◽  
Spatial And Temporal Variability ◽  
Mountain Range ◽  
Tracer Transport ◽  
Modeling Tools ◽  
Mixing Ratios ◽  
High Resolution Models ◽  
Tall Tower

Abstract. Accurate simulation of the spatial and temporal variability of tracer mixing ratios over complex terrain is challenging, but essential in order to utilize measurements made in complex orography (e.g. mountain and coastal sites) in an atmospheric inverse framework to better estimate regional fluxes of these trace gases. This study investigates the ability of high-resolution modeling tools to simulate meteorological and CO2 fields around Ochsenkopf tall tower, situated in Fichtelgebirge mountain range- Germany (1022 m a.s.l.; 50°1′48" N, 11°48′30" E). We used tower measurements made at different heights for different seasons together with the measurements from an aircraft campaign. Two tracer transport models – WRF (Eulerian based) and STILT (Lagrangian based), both with a 2 km horizontal resolution – are used together with the satellite-based biospheric model VPRM to simulate the distribution of atmospheric CO2 concentration over Ochsenkopf. The results suggest that the high-resolution models can capture diurnal, seasonal and synoptic variability of observed mixing ratios much better than coarse global models. The effects of mesoscale transports such as mountain-valley circulations and mountain-wave activities on atmospheric CO2 distributions are reproduced remarkably well in the high-resolution models. With this study, we emphasize the potential of using high-resolution models in the context of inverse modeling frameworks to utilize measurements provided from mountain or complex terrain sites.

scholarly journals High-resolution simulations of atmospheric CO<sub>2</sub> over complex terrain – representing the Ochsenkopf mountain tall tower

2011 ◽  
Vol 11 (3) ◽  
pp. 6875-6917
Author(s):  
D. Pillai ◽  
C. Gerbig ◽  
R. Ahmadov ◽  
C. Rödenbeck ◽  
R. Kretschmer ◽  
...  
Keyword(s):  
High Resolution ◽  
Complex Terrain ◽  
Atmospheric Co2 ◽  
Spatial And Temporal Variability ◽  
Mountain Range ◽  
Tracer Transport ◽  
Modeling Tools ◽  
Mixing Ratios ◽  
High Resolution Models ◽  
Tall Tower

Abstract. Accurate simulation of the spatial and temporal variability of tracer mixing ratios over complex terrain is challenging, but essential in order to utilize measurements made in complex orography (e.g. mountain and coastal sites) in an atmospheric inverse framework to better estimate regional fluxes of these trace gases. This study investigates the ability of high-resolution modeling tools to simulate meteorological and CO2 fields around Ochsenkopf tall tower, situated in Fichtelgebirge mountain range – Germany (1022 m a.s.l.; 50°1'48'' N, 11°48'30'' E). We used tower measurements made at different heights for different seasons together with the measurements from an aircraft campaign. Two tracer transport models – WRF (Eulerian based) and STILT (Lagrangian based), both with a 2 km horizontal resolution – are used together with the satellite-based biospheric model VPRM to simulate the distribution of atmospheric CO2 concentration over Ochsenkopf. The results suggest that the high-resolution models can capture diurnal, seasonal and synoptic variability of observed mixing ratios much better than coarse global models. The effects of mesoscale transports such as mountain-valley circulations and mountain-wave activities on atmospheric CO2 distributions are reproduced remarkably well in the high-resolution models. With this study, we emphasize the potential of using high-resolution models in the context of inverse modeling frameworks to utilize measurements provided from mountain or complex terrain sites.

scholarly journals Comparing high resolution WRF-VPRM simulations and two global CO<sub>2</sub> transport models with coastal tower measurements of CO<sub>2</sub>

2009 ◽  
Vol 6 (5) ◽  
pp. 807-817 ◽  
Author(s):  
R. Ahmadov ◽  
C. Gerbig ◽  
R. Kretschmer ◽  
S. Körner ◽  
C. Rödenbeck ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Fraction ◽  
Wrf Model ◽  
Co2 Concentration ◽  
Atmospheric Co2 ◽  
Concentration Data ◽  
Modeling Tools ◽  
Global Models ◽  
Diurnal Variability ◽  
Resolution Model

Abstract. In order to better understand the effects that mesoscale transport has on atmospheric CO2 distributions, we have used the atmospheric WRF model coupled to the diagnostic biospheric model VPRM, which provides high resolution biospheric CO2 fluxes based on MODIS satellite indices. We have run WRF-VPRM for the period from 16 May to 15 June in 2005 covering the intensive period of the CERES experiment, using the CO2 fields from the global model LMDZ for initialization and lateral boundary conditions. The comparison of modeled CO2 concentration time series against observations at the Biscarosse tower and against output from two global models – LMDZ and TM3 – clearly reveals that WRF-VPRM can capture the measured CO2 signal much better than the global models with lower resolution. Also the diurnal variability of the atmospheric CO2 field caused by recirculation of nighttime respired CO2 is simulated by WRF-VRPM reasonably well. Analysis of the nighttime data indicates that with high resolution modeling tools such as WRF-VPRM a large fraction of the time periods that are impossible to utilize in global models, can be used quantitatively and may help to constrain respiratory fluxes. The paper concludes that we need to utilize a high-resolution model such as WRF-VPRM to use continental observations of CO2 concentration data with more spatial and temporal coverage and to link them to the global inversion models.

scholarly journals Can we use hourly CO<sub>2</sub> concentration data in inversions? Comparing high resolution WRF-VPRM simulations with coastal tower measurements of CO<sub>2</sub>

2008 ◽  
Vol 5 (6) ◽  
pp. 4745-4776 ◽  
Author(s):  
R. Ahmadov ◽  
C. Gerbig ◽  
R. Kretschmer ◽  
S. Körner ◽  
C. Rödenbeck ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Fraction ◽  
Wrf Model ◽  
Co2 Concentration ◽  
Atmospheric Co2 ◽  
Concentration Data ◽  
Modeling Tools ◽  
Global Models ◽  
Diurnal Variability ◽  
Resolution Model

Abstract. In order to better understand the effects that mesoscale transport has on atmospheric CO2 distributions, we have used the WRF model coupled to the diagnostic biospheric model VPRM, which provides high-resolution biospheric CO2 fluxes based on MODIS satellite indices. We have run WRF-VPRM for the period from 16 May to 15 June in 2005 covering the intensive period of the CERES experiment, using the CO2 fields from the global model LMDZ for initialization and lateral boundary conditions. The comparison of modeled CO2 concentration time series against observations at the Biscarosse tower and against output from two global models – LMDZ and TM3 – clearly reveals that WRF-VPRM can capture the measured CO2 signal much better than the global models with lower resolution. Also the diurnal variability of the atmospheric CO2 field caused by recirculation of nighttime respired CO2 is simulated by WRF-VRPM reasonably well. Analysis of the nighttime data indicates that with high resolution modeling tools such as WRF-VPRM a large fraction of the time periods that are impossible to utilize in global models, can be used quantitatively and help constraining respiratory fluxes. The paper concludes that we need to utilize a high-resolution model such as WRF-VPRM to use continental observations of CO2 concentration data with more spatial and temporal coverage and to link them to the global inversion models.

Evaluation of a spatial rainfall generator for generating high resolution precipitation projections over orographically complex terrain

2016 ◽  
Vol 31 (3) ◽  
pp. 757-773 ◽  
Author(s):  
Corrado Camera ◽  
Adriana Bruggeman ◽  
Panos Hadjinicolaou ◽  
Silas Michaelides ◽  
Manfred A. Lange
Keyword(s):  
High Resolution ◽  
Complex Terrain ◽  
Precipitation Projections

scholarly journals Variations in O<sub>3</sub>, CO, and CH<sub>4</sub> over the Bay of Bengal during the summer monsoon season: Ship-borne measurements and model simulations

2016 ◽  
Author(s):  
Imran A. Girach ◽  
Narendra Ojha ◽  
Prabha R. Nair ◽  
Andrea Pozzer ◽  
Yogesh K. Tiwari ◽  
...  
Keyword(s):  
Summer Monsoon ◽  
Bay Of Bengal ◽  
Monsoon Season ◽  
Surface Ozone ◽  
Ozone Production ◽  
Spatial And Temporal Variability ◽  
Summer Monsoon Season ◽  
Rainfall Events ◽  
Model Simulations ◽  
Mixing Ratios

Abstract. We present ship-borne measurements of surface ozone, carbon monoxide and methane over the Bay of Bengal (BoB), the first time such measurements have been taken during the summer monsoon season, as a part of the Continental Tropical Convergence Zone (CTCZ) experiment during 2009. O3, CO, and CH4 mixing ratios exhibited significant spatial and temporal variability in the ranges of 8–54 nmol mol−1, 50–200 nmol mol−1, and 1.57–2.15 µmol mol−1, with means of 29.7 ± 6.8 nmol mol−1, 96 ± 25 nmol mol−1, and 1.83 ± 0.14 µmol mol−1, respectively. The average mixing ratios of trace gases over northern BoB (O3: 30 ± 7 nmol mol−1, CO: 95 ± 25 nmol mol−1, CH4: 1.86 ± 0.12 µmol mol−1), in airmasses from northern or central India, did not differ much from those over central BoB (O3: 27 ± 5 nmol mol−1, CO: 101 ± 27 nmol mol−1, CH4: 1.72 ± 0.14 µmol mol−1), in airmasses from southern India. Spatial variability is observed to be most significant for CH4. The ship-based observations, in conjunction with backward air trajectories and ground-based measurements over the Indian region, are analyzed to estimate a net ozone production of 1.5–4 nmol mol−1 day−1 in the outflow. Ozone mixing ratios over the BoB showed large reductions (by ~ 20 nmol mol−1) during four rainfall events. Temporal changes in the meteorological parameters, in conjunction with ozone vertical profiles, indicate that these low ozone events are associated with downdrafts of free-tropospheric ozone-poor airmasses. While the observed variations in O3 and CO are successfully reproduced using the Weather Research and Forecasting model with Chemistry (WRF-Chem), this model overestimates mean concentrations by about 20 %, generally overestimating O3 mixing ratios during the rainfall events. Analysis of the chemical tendencies from model simulations for a low-O3 event on August 10, 2009, captured successfully by the model, shows the key role of horizontal advection in rapidly transporting ozone-rich airmasses across the BoB. Our study fills a gap in the availability of trace gas measurements over the BoB, and when combined with data from previous campaigns, reveals large seasonal amplitude (~ 39 and ~ 207 nmol mol−1 for O3 and CO, respectively) over the northern BoB.

Wind power forecasting for a real onshore wind farm on complex terrain using WRF high resolution simulations

2019 ◽  
Vol 135 ◽  
pp. 674-686 ◽  
Author(s):  
Miguel A. Prósper ◽  
Carlos Otero-Casal ◽  
Felipe Canoura Fernández ◽  
Gonzalo Miguez-Macho
Keyword(s):  
High Resolution ◽  
Wind Power ◽  
Complex Terrain ◽  
Wind Farm ◽  
Onshore Wind ◽  
Wind Power Forecasting ◽  
Power Forecasting

Evaluation of Surface Analyses and Forecasts with a Multiscale Ensemble Kalman Filter in Regions of Complex Terrain

2011 ◽  
Vol 139 (6) ◽  
pp. 2008-2024 ◽  
Author(s):  
Brian C. Ancell ◽  
Clifford F. Mass ◽  
Gregory J. Hakim
Keyword(s):  
Kalman Filter ◽  
High Resolution ◽  
Data Assimilation ◽  
Ensemble Kalman Filter ◽  
Complex Terrain ◽  
Error Variance ◽  
Small Scale ◽  
Observation Error ◽  
Grid Spacing ◽  
Background Error

Abstract Previous research suggests that an ensemble Kalman filter (EnKF) data assimilation and modeling system can produce accurate atmospheric analyses and forecasts at 30–50-km grid spacing. This study examines the ability of a mesoscale EnKF system using multiscale (36/12 km) Weather Research and Forecasting (WRF) model simulations to produce high-resolution, accurate, regional surface analyses, and 6-h forecasts. This study takes place over the complex terrain of the Pacific Northwest, where the small-scale features of the near-surface flow field make the region particularly attractive for testing an EnKF and its flow-dependent background error covariances. A variety of EnKF experiments are performed over a 5-week period to test the impact of decreasing the grid spacing from 36 to 12 km and to evaluate new approaches for dealing with representativeness error, lack of surface background variance, and low-level bias. All verification in this study is performed with independent, unassimilated observations. Significant surface analysis and 6-h forecast improvements are found when EnKF grid spacing is reduced from 36 to 12 km. Forecast improvements appear to be a consequence of increased resolution during model integration, whereas analysis improvements also benefit from high-resolution ensemble covariances during data assimilation. On the 12-km domain, additional analysis improvements are found by reducing observation error variance in order to address representativeness error. Removing model surface biases prior to assimilation significantly enhances the analysis. Inflating surface wind and temperature background error variance has large impacts on analyses, but only produces small improvements in analysis RMS errors. Both surface and upper-air 6-h forecasts are nearly unchanged in the 12-km experiments. Last, 12-km WRF EnKF surface analyses and 6-h forecasts are shown to generally outperform those of the Global Forecast System (GFS), North American Model (NAM), and the Rapid Update Cycle (RUC) by about 10%–30%, although these improvements do not extend above the surface. Based on these results, future improvements in multiscale EnKF are suggested.

Sign in / Sign up

Export Citation Format

Share Document