scholarly journals Contributions to the explosive growth of PM<sub>2.5</sub> mass due to aerosol–radiation feedback and decrease in turbulent diffusion during a red alert heavy haze in Beijing–Tianjin–Hebei, China

2018 ◽  
Vol 18 (23) ◽  
pp. 17717-17733 ◽  
Author(s):  
Hong Wang ◽  
Yue Peng ◽  
Xiaoye Zhang ◽  
Hongli Liu ◽  
Meng Zhang ◽  
...  

Abstract. The explosive growth of PM2.5 mass usually results in extreme PM2.5 levels and severe haze pollution in eastern China, and is generally underestimated by current atmospheric chemistry models. Based on one such model, GRAPES_CUACE, three sensitivity experiments – a “background” experiment (EXP1), an “online aerosol feedback” experiment (EXP2), and an “80 % decrease in the turbulent diffusion coefficient of chemical tracers” experiment, based on EXP2 (EXP3) – were designed to study the contributions of the aerosol–radiation feedback (AF) and the decrease in the turbulent diffusion coefficient to the explosive growth of PM2.5 during a “red alert” heavy haze event in China's Jing–Jin–Ji (Beijing–Tianjin–Hebei) region. The results showed that the turbulent diffusion coefficient calculated by EXP1 was about 60–70 m−2 s−1 on a clear day and 30–35 m−2 s−1 on a haze day. This difference in the diffusion coefficient was not enough to distinguish between the unstable atmosphere on the clear day and the extremely stable atmosphere during the PM2.5 explosive growth stage. Furthermore, the inversion calculated by EXP1 was obviously weaker than the actual inversion from sounding observations on the haze day. This led to a 40 %–51 % underestimation of PM2.5 by EXP1; the AF decreased the diffusion coefficient by about 43 %–57 % during the PM2.5 explosive growth stage, which obviously strengthened the local inversion. In addition, the local inversion indicated by EXP2 was much closer to the sounding observations than that indicated by EXP1. This resulted in a 20 %–25 % reduction of PM2.5 negative errors in the model, with errors as low as −16 % to −11 % in EXP2. However, the inversion produced by EXP2 was still weaker than the actual observations, and the AF alone could not completely explain the PM2.5 underestimation. Based on EXP2, the 80 % decrease in the turbulent diffusion coefficient of chemical tracers in EXP3 resulted in near-zero turbulent diffusion, referred to as a “turbulent intermittence” atmospheric state, which subsequently resulted in a further 14 %–20 % reduction of the PM2.5 underestimation; moreover, the negative PM2.5 errors were reduced to −11 % to 2 %. The combined effects of the AF and the decrease in the turbulent diffusion coefficient explained over 79 % of the underestimation of the explosive growth of PM2.5 in this study. The results show that online calculation of the AF is essential for the prediction of PM2.5 explosive growth and peaks during severe haze in China's Jing–Jin–Ji region. Furthermore, an improvement in the planetary boundary layer scheme with respect to extremely stable atmospheric stratification is essential for a reasonable description of local “turbulent intermittence” and a more accurate prediction of PM2.5 explosive growth during severe haze in this region of China.

2018 ◽  
Author(s):  
Hong Wang ◽  
Xioaye Zhang ◽  
Yao Peng ◽  
Hongli Liu ◽  
Meng Zhang ◽  
...  

Abstract. The explosive growth (EG) of PM2.5 mass usually resulted in PM2.5 extreme levels and severe haze pollution in east China and they were generally underestimated by current atmospheric chemical models. Based on the atmospheric chemical model GRPAES_CUACE, three experiments of background (EXP_bk), normal turbulent diffusion and aerosols feedback (EXP_td_af), and retaining 20 % of normal turbulent diffusion of chemical tracers of EXP_td_af (EXP_td20_af) are designed to study the contributions to the EG of PM2.5 due to aerosols-radiation feedback (AF) and further decrease in turbulent diffusion (DTD) focusing on a red-alert heavy haze in JING-JIN-JI of China. The study results showed that turbulent diffusion coefficient (DC) calculated by EXP_bk is about 60–70 m2/s on clear day and 30–35 m2/s on haze day. This difference of DC was not enough to discriminate the unstable atmosphere on clear day and extreme stable atmosphere during EG stage of PM2.5, and the inversion calculated by EXP_bk was obviously weaker than the actual atmosphere of sounding observation on haze day. This led to 40–51 % underestimation of PM2.5 EG by EXP_bk; AF reduced about 43–57 % of DC during EG stage of PM2.5, which strengthened the local inversion obviously on haze day and local inversion by EXP_td_af was much closer to the sounding observation than that by EXP_bk. This resulted in 20–25 % reduction of model errors of PM2.5 and it was as low as −16 to −11 %. However, the inversion by EXP_td_af was still weaker than the actual observation and AF could not solve all the problems of PM2.5 underestimation. Based on EXP_td_af, 80 % DTD of chemical tracers resulted in a near-zero turbulent diffusion named as turbulent intermittent atmosphere state in EXP_td20_af resulting in a further 14–20 % reduction of PM2.5 underestimation and the negative PM2.5 errors of was reduced to −11 to 2 % during the EG stage of PM2.5. The combined effects of AF and DTD solved over 79 % underestimation of PM2.5 EG in this case study. The results showed that the online calculation of aerosol-radiation feedback and a further improving arithmetic of PBL scheme focusing on extreme stable atmosphere stratification are indispensable for reasonable description of local turbulent intermittent and more accurate prediction of PM2.5 EG and high levels during the severe haze in Jing-Jin-Ji in China.


1991 ◽  
Vol 231 ◽  
pp. 665-688 ◽  
Author(s):  
James B. Young ◽  
Thomas J. Hanratty

An extension of an axial viewing optical technique (first used by Lee, Adrian & Hanratty) is described which allows the determination of the turbulence characteristics of solid particles being transported by water in a pipe. Measurements are presented of the mean radial velocity, the mean rate of change radial velocity, the mean-square of the radial and circumferential fluctuations, the Eulerian turbulent diffusion coefficient, and the Lagrangian turbulent diffusion coefficient. A particular focus is to explore the influence of slip velocity for particles which have small time constants. It is found that with increasing slip velocity the magnitude of the turbulent velocity fluctuations remains unchanged but that the turbulent diffusivity decreases. The measurements of the average rate of change of particle velocity are consistent with the notion that particles move from regions of high fluid turbulence to regions of low fluid turbulence. Measurements of the root-mean-square of the fluctuations of the rate of change of particle velocity allow an estimation of the average magnitude of the particle slip in a highly turbulent flow, which needs to be known to analyse the motion of particles not experiencing a Stokes drag.


1984 ◽  
Vol 105 ◽  
pp. 523-524
Author(s):  
Wai-Yuen Law ◽  
E. Knobloch ◽  
H.C. Spruit

Following Schatzman and Maeder (1981) we compute the evolution of the sun with partial mixing by hydrodynamic instabilities. Instead of simply assuming a turbulent diffusion coefficient which is a constant multiple of the viscosity, we incorporate some of the properties of hydrodynamic instabilities. This puts limits on the amount of diffusion that can be obtained, and makes it dependent on time and position in the star.


2020 ◽  
Author(s):  
Lei Zhang ◽  
Sunling Gong ◽  
Tianliang Zhao ◽  
Chunhong Zhou ◽  
Yuesi Wang ◽  
...  

Abstract. The development of chemical transport models with advanced physics and chemical schemes could improve air-quality forecasts. In this study, the China Meteorological Administration Unified Atmospheric Chemistry Environment (CUACE) model, a comprehensive chemistry module incorporating gaseous chemistry and a size-segregated multicomponent aerosol algorithm, was coupled to the Weather Research and Forecasting (WRF)-Chem framework using an interface procedure to build the WRF/CUACE v1.0 model. The latest version of CUACE includes an updated aerosol dry deposition scheme and the introduction of heterogeneous chemical reactions on aerosol surfaces. We evaluated the WRF/CUACE v1.0 model by simulating PM2.5, O3, and NO2 concentrations for January, April, July, and October (representing winter, spring, summer, and autumn, respectively) in 2013, 2015, and 2017 and comparing them with ground-based observations. Secondary inorganic aerosol simulations were also evaluated through a simulation of a heavy haze pollution event during 9–15 January 2019 in the North China Plain. The model well captured the variations of PM2.5, O3, and NO2 concentrations in all seasons in eastern China. However, it is difficult to accurately reproduce the variations of air pollutants over Sichuan Basin, due to its deep basin terrain. The sulfate and nitrate simulations are substantially improved by introducing heterogenous chemical reactions into the CUACE model (change in bias from −95.0 % to 4.1 % for sulfate and from 124.1 % to 96.0 % for nitrate). The development of the WRF/CUACE v1.0 model represents an important step towards improving air-quality modelling and forecasts in China.


2016 ◽  
Vol 38 ◽  
pp. 53
Author(s):  
Karine Rui ◽  
Camila Pinto da Costa

In this work, we present the resolution of the three-dimensional stationary advection-diffusion equation, through the GIADMT technique, considering the nonlocal closure for turbulent flow, using two different parameterization for the countergradient, one proposal by Cuijpers e Holtslag (1998) and another proposed by Roberti et al. (2004). The concentration of pollutants is estimated and compared with the observed data in Copenhagen experiment using different parameterization for the vertical turbulent diffusion coefficient.


Sign in / Sign up

Export Citation Format

Share Document