scholarly journals Weak and intense katabatic winds: impacts on turbulent characteristics in the stable boundary layer and CO<sub>2</sub> transport

Author(s):  
Jon A. Arrillaga ◽  
Carlos Yagüe ◽  
Carlos Román-Cascón ◽  
Mariano Sastre ◽  
Gregorio Maqueda ◽  
...  

Abstract. The role of thermally-driven local downslope or katabatic flows in the dynamics and turbulent features of the stable boundary layer (SBL) is investigated using observations. Measurements are carried out in a relatively flat area 2-km away from the steep slopes of the Guadarrama Mountain Range (Spain). Forty katabatic events are selected from an observational database spanning the 2017-summer period, by using an objective and systematic algorithm that is able to account for local and synoptic forcings. We subsequently classify the katabatic events into weak, moderate and intense according to the observed maximum wind speed. This classification enables us to contrast the main differences in dynamics and thermal structure. We find that the stronger katabatic events are associated with an earlier onset time of these flows. We relate it to very low soil-moisture values (

2017 ◽  
Vol 56 (11) ◽  
pp. 3035-3047 ◽  
Author(s):  
Steven J. A. van der Linden ◽  
Peter Baas ◽  
J. Antoon van Hooft ◽  
Ivo G. S. van Hooijdonk ◽  
Fred C. Bosveld ◽  
...  

AbstractGeostrophic wind speed data, derived from pressure observations, are used in combination with tower measurements to investigate the nocturnal stable boundary layer at Cabauw, the Netherlands. Since the geostrophic wind speed is not directly influenced by local nocturnal stability, it may be regarded as an external forcing parameter of the nocturnal stable boundary layer. This is in contrast to local parameters such as in situ wind speed, the Monin–Obukhov stability parameter (z/L), or the local Richardson number. To characterize the stable boundary layer, ensemble averages of clear-sky nights with similar geostrophic wind speeds are formed. In this manner, the mean dynamical behavior of near-surface turbulent characteristics and composite profiles of wind and temperature are systematically investigated. The classification is found to result in a gradual ordering of the diagnosed variables in terms of the geostrophic wind speed. In an ensemble sense the transition from the weakly stable to very stable boundary layer is more gradual than expected. Interestingly, for very weak geostrophic winds, turbulent activity is found to be negligibly small while the resulting boundary cooling stays finite. Realistic numerical simulations for those cases should therefore have a comprehensive description of other thermodynamic processes such as soil heat conduction and radiative transfer.


2019 ◽  
Vol 19 (7) ◽  
pp. 4615-4635
Author(s):  
Jon Ander Arrillaga ◽  
Carlos Yagüe ◽  
Carlos Román-Cascón ◽  
Mariano Sastre ◽  
Maria Antonia Jiménez ◽  
...  

Abstract. The interconnection of local downslope flows of different intensities with the turbulent characteristics and thermal structure of the atmospheric boundary layer (ABL) is investigated through observations. Measurements are carried out in a relatively flat area 2 km away from the steep slopes of the Sierra de Guadarrama (central Iberian Peninsula). A total of 40 thermally driven downslope events are selected from an observational database spanning the summer 2017 period by using an objective and systematic algorithm that accounts for a weak synoptic forcing and local downslope wind direction. We subsequently classify the downslope events into weak, moderate and intense categories, according to their maximum 6 m wind speed. This classification enables us to contrast their main differences regarding the driving mechanisms, associated ABL turbulence and thermal structure, and the major dynamical characteristics. We find that the strongest downslope flows (U > 3.5 m s−1) develop when soil moisture is low ( < 0.07 m3 m−3) and the synoptic wind not so weak (3.5 m s−1 < V850 < 6 m s−1) and roughly parallel to the direction of the downslope flow. The latter adds an important dynamical input, which induces an early flow advection from the nearby steep slope, when the local thermal profile is not stable yet. Consequently, turbulence driven by the bulk shear increases up to friction velocity (u*) ≃ 1 m s−1, preventing the development of the surface-based thermal inversion and giving rise to the so-called weakly stable boundary layer. On the contrary, when the dynamical input is absent, buoyancy acceleration drives the formation of a katabatic flow, which is weak (U < 1.5 m s−1) and generally manifested in the form of a shallow jet below 3 m. The relative flatness of the area favours the formation of very stable boundary layers marked by very weak turbulence (u* < 0.1 m s−1). In between, moderate downslope flows show intermediate characteristics, depending on the strength of the dynamical input and the occasional interaction with down-basin winds. On the other hand, by inspecting individual weak and intense events, we further explore the impact of downslope flows on CO2 variability. By relating the dynamics of the distinct turbulent regimes to the CO2 budget, we are able to estimate the contribution of the different terms. For the intense event, indeed, we infer a horizontal transport of 67 ppm in 3 h driven by the strong downslope advection.


2020 ◽  
Author(s):  
Ivana Stiperski ◽  
Albert A.M. Holtslag ◽  
Manuela Lehner ◽  
C. David Whiteman

&lt;p&gt;Height of the stable boundary layer (SBL) presents an important diagnostic used to describe the relevant processes governing the evolution and characteristics of SBL, and the extent to which the surface is communicating with the free atmosphere. &amp;#160;Here we investigate the SBL height over a gentle (1&amp;#176;) mesoscale slope on which relatively deep mid-latitude katabatic flows (with jet maxima between 20 and 50 m) develop during clear nights. We show that detecting the SBL top depends on the method used (Richardson number, flux- and anisotropy-profiles). The detected SBL depth, mostly deviates from the jet maximum height or the top of the near-surface inversion. The flat terrain formulations for the SBL height correlate well with the detected top of the SBL if instead of background stratification, near-surface stratification is used in their formulations, however, they mostly largely overestimate the SBL height. The difference to flat-terrain SBL is also shown through the dependence of size of the dominant eddy with height. In katabatic flows the eddy size is semi-constant with height throughout the SBL, whereas in flat terrain eddy size varies significantly with height.&lt;/p&gt;


Atmosphere ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 401
Author(s):  
Jonathan Biehl ◽  
Bastian Paas ◽  
Otto Klemm

City centers have to cope with an increasing amount of air pollution. The supply of fresh air is crucial yet difficult to ensure, especially under stable conditions of the atmospheric boundary layer. This case study used the PArallelized Large eddy simulation (LES) Model PALM to investigate the wind field over an urban lake that had once been built as a designated fresh air corridor for the city center of Münster, northwest, Germany. The model initialization was performed using the main wind direction and stable boundary layer conditions as input. The initial wind and temperature profiles included a weak nocturnal low-level jet. By emitting a passive scalar at one point on top of a bridge, the dispersion of fresh air could be traced over the lake’s surface, within street canyons leading to the city center and within the urban boundary layer above. The concept of city ventilation was confirmed in principle, but the air took a direct route from the shore of the lake to the city center above a former river bed and its adjoining streets rather than through the street canyons. According to the dispersion of the passive scalar, half of the city center was supplied with fresh air originating from the lake. PALM proved to be a useful tool to study fresh air corridors under stable boundary layer conditions.


Author(s):  
Lena Pfister ◽  
Karl Lapo ◽  
Larry Mahrt ◽  
Christoph K. Thomas

AbstractIn the stable boundary layer, thermal submesofronts (TSFs) are detected during the Shallow Cold Pool experiment in the Colorado plains, Colorado, USA in 2012. The topography induces TSFs by forming two different air layers converging on the valley-side wall while being stacked vertically above the valley bottom. The warm-air layer is mechanically generated by lee turbulence that consistently elevates near-surface temperatures, while the cold-air layer is thermodynamically driven by radiative cooling and the corresponding cold-air drainage decreases near-surface temperatures. The semi-stationary TSFs can only be detected, tracked, and investigated in detail when using fibre-optic distributed sensing (FODS), as point observations miss TSFs most of the time. Neither the occurrence of TSFs nor the characteristics of each air layer are connected to a specific wind or thermal regime. However, each air layer is characterized by a specific relationship between the wind speed and the friction velocity. Accordingly, a single threshold separating different flow regimes within the boundary layer is an oversimplification, especially during the occurrence of TSFs. No local forcings or their combination could predict the occurrence of TSFs except that they are less likely to occur during stronger near-surface or synoptic-scale flow. While classical conceptualizations and techniques of the boundary layer fail in describing the formation of TSFs, the use of spatially continuous data obtained from FODS provide new insights. Future studies need to incorporate spatially continuous data in the horizontal and vertical planes, in addition to classic sensor networks of sonic anemometry and thermohygrometers to fully characterize and describe boundary-layer phenomena.


2000 ◽  
Vol 97 (1) ◽  
pp. 1-24 ◽  
Author(s):  
J. J. Holden ◽  
S. H. Derbyshire ◽  
S. E. Belcher

Sign in / Sign up

Export Citation Format

Share Document