scholarly journals Optical and geometrical aerosol particle properties over the United Arab Emirates

2020 ◽  
Author(s):  
Maria Filioglou ◽  
Elina Giannakaki ◽  
John Backman ◽  
Jutta Kesti ◽  
Anne Hirsikko ◽  
...  
Keyword(s):  
Aerosol Particle ◽  
United Arab Emirates ◽  
Mineral Dust ◽  
Depolarization Ratio ◽  
Raman Lidar ◽  
Particle Properties ◽  
Measurement Site ◽  
Lidar Ratio ◽  
One Year ◽  
532 Nm

Abstract. One-year of ground-based night-time Raman lidar observations have been analysed under the Optimization of Aerosol Seeding In rain enhancement Strategies (OASIS) project, in order to characterize the aerosol particle properties over a rural site in the United Arab Emirates. In total, 1130 aerosol particle layers were detected during the one-year measurement campaign which took place between March 2018 and February 2019. Several subsequent aerosol layers could be observed simultaneously in the atmosphere up to 11 km. The observations indicate that the measurement site is a receptor of frequent dust events but predominantly the dust is mixed with aerosols of anthropogenic and/or marine origin. The mean aerosol optical depth over the measurement site ranged at 0.37 ± 0.12 and 0.21 ± 0.11 for the 355 and 532 nm, respectively. Moreover, a mean lidar ratio of 43 ± 11 sr at a wavelength of 355 nm and 39 ± 10 sr at 532 nm was found. The average linear particle depolarization ratio measured over the course of the campaign was 15 ± 6 % and 19 ± 7 % at 355 nm and 532 nm wavelengths, respectively. Since the region is both a source and a receptor of mineral dust, we have also explored the properties of Arabian mineral dust of the greater area of United Arab of Emirates and the Arabian Peninsula. The observed Arabian dust particle properties were 45 ± 5 (42 ± 5) sr at 355 (532) nm for the lidar ratio, 25 ± 2 % (31 ± 2 %) for the linear particle depolarization ratio at 355 (532) nm, and 0.3 ± 0.2 (0.2 ± 0.2) for the extinction‑related Ångström exponent (backscatter‑related Ångström exponent) between 355 and 532 nm. This study is the first to report comprehensive optical properties of the Arabian dust particles based on long term observations, using at the fullest the capabilities of a multi wavelength Raman lidar instrument. The results suggest that the mineral dust properties over the Middle East and western Asia, including the observation site, are comparable to those of African mineral dust with regard to the particle depolarization ratios but not for lidar ratios. The smaller lidar ratio values in this study compared to the reference studies are attributed to the difference in the geochemical characteristics of the soil originating in the study region compared to Northern Africa.

scholarly journals Optical and geometrical aerosol particle properties over the United Arab Emirates

2020 ◽  
Vol 20 (14) ◽  
pp. 8909-8922 ◽  
Author(s):  
Maria Filioglou ◽  
Elina Giannakaki ◽  
John Backman ◽  
Jutta Kesti ◽  
Anne Hirsikko ◽  
...  
Keyword(s):  
Aerosol Particle ◽  
United Arab Emirates ◽  
Mineral Dust ◽  
Depolarization Ratio ◽  
Raman Lidar ◽  
Particle Properties ◽  
Measurement Site ◽  
Ångström Exponent ◽  
Lidar Ratio ◽  
532 Nm

Abstract. One year of ground-based night-time Raman lidar observations has been analysed under the Optimization of Aerosol Seeding In rain enhancement Strategies (OASIS) project, in order to characterize the aerosol particle properties over a rural site in the United Arab Emirates. In total, 1130 aerosol particle layers were detected during the 1-year measurement campaign which took place between March 2018 and February 2019. Several subsequent aerosol layers could be observed simultaneously in the atmosphere up to 11 km. The observations indicate that the measurement site is a receptor of frequent dust events, but predominantly the dust is mixed with aerosols of anthropogenic and/or marine origin. The mean aerosol optical depth over the measurement site ranged at 0.37 ± 0.12 and 0.21 ± 0.11 for 355 and 532 nm, respectively. Moreover, mean lidar ratios of 43 ± 11 sr at a wavelength of 355 nm and 39 ± 10 sr at 532 nm were found. The average linear particle depolarization ratio measured over the course of the campaign was 15 ± 6 % and 19 ± 7 % at the 355 and 532 nm wavelengths, respectively. Since the region is both a source and a receptor of mineral dust, we have also explored the properties of Arabian mineral dust of the greater area of the United Arab of Emirates and the Arabian Peninsula. The observed Arabian dust particle properties were 45 ± 5 (42 ± 5) sr at 355 (532) nm for the lidar ratio, 25 ± 2 % (31 ± 2 %) for the linear particle depolarization ratio at 355 (532) nm, and 0.3 ± 0.2 (0.2 ± 0.2) for the extinction-related Ångström exponent (backscatter-related Ångström exponent) between 355 and 532 nm. This study is the first to report comprehensive optical properties of the Arabian dust particles based on 1-year long observations, using to their fullest the capabilities of a multi-wavelength Raman lidar instrument. The results suggest that the mineral dust properties over the Middle East and western Asia, including the observation site, are comparable to those of African mineral dust with regard to the particle depolarization ratios, but not for lidar ratios. The smaller lidar ratio values in this study compared to the reference studies are attributed to the difference in the geochemical characteristics of the soil originating in the study region compared to northern Africa.

Characterization of dust aerosol over United Arab Emirates

2020 ◽  
Author(s):  
Mika Komppula ◽  
Maria Filioglou ◽  
Xiaoxia Shang ◽  
Eleni Giannakaki ◽  
Anne Hirsikko ◽  
...  
Keyword(s):  
United Arab Emirates ◽  
Mineral Dust ◽  
Raman Lidar ◽  
Study Region ◽  
Water Vapour Concentration ◽  
Western Asia ◽  
Dust Events ◽  
One Year ◽  
The One ◽  
Depolarization Ratios

<p>One-year of ground-based Raman lidar observations have been conducted in order to characterize the aerosol properties over United Arab Emirates (UAE). In total, over 1000 aerosol layers were detected during the one-year campaign period which was carried between March 2018 and February 2019. We found that the measurement site is a receptor of frequent dust events but predominantly the dust is mixed with anthropogenic and/or aerosol of marine origin. With our multiwavelength PollyXT Raman lidar we are able to retrieve the backscatter coefficients (at 355, 532 and 1064 nm), extinction coefficients (at 387 and 607nm), particle depolarization ratios (at 355 and 532 nm), water vapour concentration (at 407 nm), and further on lidar ratios and Ångström exponents to characterize the aerosols properties in detail. In general, the average lidar ratios and linear particle depolarization ratios already showed strong presence of dust aerosols. Since the region is both a source and a receptor of mineral dust, we have also explored the pure mineral dust properties in the region. The findings suggest that the mineral dust properties over the Middle East and western Asia, including the observation site, are comparable to those of the African mineral dust regarding the particle depolarization ratios but not the lidar ratios. The lower lidar ratio values are attributed to different geochemical characteristics of the under-study region compared to soil originating from Northern Africa.</p>

Comparing Halo Doppler lidar depolarization ratio with PollyXT

2020 ◽  
Author(s):  
Ville Vakkari ◽  
Ewan O'Connor ◽  
Holger Baars ◽  
Johannes Bühl
Keyword(s):  
Aerosol Particle ◽  
Mineral Dust ◽  
Chem Phys ◽  
High Spectral Resolution ◽  
Stream Line ◽  
Doppler Lidar ◽  
Depolarization Ratio ◽  
Post Processing ◽  
Wildfire Smoke ◽  
532 Nm

<p>Depolarization ratio is highly valuable in lidar-based aerosol classification and can be used to quantify the contributions of different aerosol types to elevated layers [1]. Typically, aerosol particle depolarization ratio is determined at relatively short wavelengths of 355 nm and/or 532 nm, though some multi-wavelength case studies including 1064 nm have shown strong spectral dependency [2,3]. Here, we demonstrate that Halo Photonics Stream Line Doppler lidars can be used to retrieve aerosol particle depolarization ratio at 1.5 µm wavelength.</p><p> </p><p>We utilize measurements in April-May 2017 at Limassol, Cyprus to compare the Halo 1.5 µm aerosol particle depolarization ratio with Polly XT aerosol particle depolarization ratio. Recently developed post-processing [4] enables retrieving weak signals (as low as -32 dB) with the Halo Doppler lidar. At Limassol, we were able to determine particle depolarization ratio for several cases of mineral dust up to 3 km above ground. Generally, particle depolarization ratio for mineral dust at 1.5 µm appears higher than at shorter wavelengths of 355 nm and 532 nm retrieved by Polly XT. Overall, our results indicate that Halo Doppler lidars can add another wavelength at 1.5 µm to studies on the spectral dependency of aerosol depolarization ratio, at least in the lowest 2-3 km above ground.</p><p> </p><p>[1] Mamouri, R.-E. and Ansmann, A.: Potential of polarization/Raman lidar to separate fine dust, coarse dust, maritime, and anthropogenic aerosol profiles, Atmos. Meas. Tech., 10, 3403-3427, https://doi.org/10.5194/amt-10-3403-2017, 2017.</p><p>[2] Burton, S. P., Hair, J. W., Kahnert, M., Ferrare, R. A., Hostetler, C. A., Cook, A. L., Harper, D. B., Berkoff, T. A., Seaman, S. T., Collins, J. E., Fenn, M. A. and Rogers, R. R.: Observations of the spectral dependence of linear particle depolarization ratio of aerosols using NASA Langley airborne High Spectral Resolution Lidar, Atmos. Chem. Phys., 15, 13453–13473, doi:10.5194/acp-15-13453-2015, 2015.</p><p>[3] Haarig, M., Ansmann, A., Baars, H., Jimenez, C., Veselovskii, I., Engelmann, R. and Althausen, D.: Depolarization and lidar ratios at 355, 532, and 1064 nm and microphysical properties of aged tropospheric and stratospheric Canadian wildfire smoke, Atmos. Chem. Phys., 18, 11847–11861, doi:10.5194/acp-18-11847-2018, 2018.</p><p>[4] Vakkari, V., Manninen, A. J., O’Connor, E. J., Schween, J. H., van Zyl, P. G. and Marinou, E.: A novel post-processing algorithm for Halo Doppler lidars, Atmos. Meas. Tech., 12(2), 839–852, doi:10.5194/amt-12-839-2019, 2019.</p>

scholarly journals Optical and microphysical characterization of aerosol layers over South Africa by means of multi-wavelength depolarization and Raman lidar measurements

2015 ◽  
Vol 15 (23) ◽  
pp. 35237-35276
Author(s):  
E. Giannakaki ◽  
P. G. van Zyl ◽  
D. Müller ◽  
D. Balis ◽  
M. Komppula
Keyword(s):  
South Africa ◽  
Biomass Burning ◽  
Single Scattering ◽  
Effective Radius ◽  
Depolarization Ratio ◽  
Raman Lidar ◽  
Desert Dust ◽  
Multi Wavelength ◽  
Lidar Ratio ◽  
532 Nm

Abstract. Optical and microphysical properties of different aerosol types over South Africa measured with a multi-wavelength polarization Raman lidar are presented. This study could assist in bridging existing gaps relating to aerosol properties over South Africa, since limited long-term data of this type is available for this region. The observations were performed under the framework of the EUCAARI campaign in Elandsfontein. The multi-wavelength PollyXT Raman lidar system was used to determine vertical profiles of the aerosol optical properties, i.e. extinction and backscatter coefficients, Ångström exponents, lidar ratio and depolarization ratio. The mean microphysical aerosol proper ties, i.e. effective radius and single scattering, albedo were retrieved with an advanced inversion algorithm. Clear differences were observed for the intensive optical properties of atmospheric layers of biomass burning and urban/industrial aerosols. Our results reveal a wide range of optical and microphysical parameters for biomass burning aerosols. This indicates probable mixing of biomass burning aerosols with desert dust particles, as well as the possible continuous influence of urban/industrial aerosol load in the region. The lidar ratio at 355 nm, the linear particle depolarization ratio at 355 nm and the extinction-related Ångström exponent from 355 to 532 nm were 52 ± 7 sr; 0.9 ± 0.4 % and 2.3 ± 0.5, respectively for urban/industrial aerosols, while these values were 92 ± 10 sr; 3.2 ± 1.3 %; 2.0 ± 0.4 respectively for biomass burning aerosols layers. Biomass burning particles are larger and slightly less absorbing compared to urban/industrial aerosols. The particle effective radius were found to be 0.10 ± 0.03, 0.17 ± 0.04 and 0.13 ± 0.03 μm for urban/industrial, biomass burning, and mixed biomass burning and desert dust aerosols, respectively, while the single scattering albedo at 532 nm were 0.87 ± 0.06, 0.90 ± 0.06, and 0.88 ± 0.07 (at 532 nm), respectively for these three types of aerosols. Our results were within the same range of previously reported values.

scholarly journals Aerosol particle depolarization ratio at 1565 nm measured with a Halo Doppler lidar

2021 ◽  
Vol 21 (8) ◽  
pp. 5807-5820
Author(s):  
Ville Vakkari ◽  
Holger Baars ◽  
Stephanie Bohlmann ◽  
Johannes Bühl ◽  
Mika Komppula ◽  
...  
Keyword(s):  
Aerosol Particle ◽  
Mineral Dust ◽  
Birch Pollen ◽  
Doppler Lidar ◽  
Marine Aerosol ◽  
Depolarization Ratio ◽  
Lidar System ◽  
Multi Wavelength ◽  
Linear Depolarization Ratio ◽  
532 Nm

Abstract. The depolarization ratio is a valuable parameter for lidar-based aerosol categorization. Usually, the aerosol particle depolarization ratio is determined at relatively short wavelengths of 355 nm and/or 532 nm, but some multi-wavelength studies including longer wavelengths indicate strong spectral dependency. Here, we investigate the capabilities of Halo Photonics StreamLine Doppler lidars to retrieve the particle linear depolarization ratio at the 1565 nm wavelength. We utilize collocated measurements with another lidar system, PollyXT at Limassol, Cyprus, and at Kuopio, Finland, to compare the depolarization ratio observed by the two systems. For mineral-dust-dominated cases we find typically a slightly lower depolarization ratio at 1565 nm than at 355 and 532 nm. However, for dust mixed with other aerosol we find a higher depolarization ratio at 1565 nm. For polluted marine aerosol we find a marginally lower depolarization ratio at 1565 nm compared to 355 and 532 nm. For mixed spruce and birch pollen we find a slightly higher depolarization ratio at 1565 nm compared to 532 nm. Overall, we conclude that Halo Doppler lidars can provide a particle linear depolarization ratio at the 1565 nm wavelength at least in the lowest 2–3 km above ground.

scholarly journals Multi-wavelength Raman lidar observations of the Eyjafjallajökull volcanic cloud over Potenza, Southern Italy

2011 ◽  
Vol 11 (4) ◽  
pp. 12763-12803 ◽  
Author(s):  
L. Mona ◽  
A. Amodeo ◽  
G. D'Amico ◽  
A. Giunta ◽  
F. Madonna ◽  
...  
Keyword(s):  
Southern Italy ◽  
Saharan Dust ◽  
Depolarization Ratio ◽  
Raman Lidar ◽  
Lidar Measurements ◽  
Ångström Exponent ◽  
Multi Wavelength ◽  
Lidar Ratio ◽  
Linear Depolarization Ratio ◽  
532 Nm

Abstract. Multi-wavelength Raman lidar measurements were performed at CNR-IMAA Atmospheric Observatory (CIAO) during the entire Eyjafjallajökull explosive eruptive period in April–May 2010, whenever weather conditions permitted. A methodology for volcanic layer identification and accurate aerosol typing has been developed on the basis both of the multi-wavelength Raman lidar measurements and EARLINET measurements performed at CIAO since 2000. The aerosol mask for lidar measurements performed at CIAO during the 2010 Eyjafjallajökull eruption has been obtained. Volcanic aerosol layers have been observed in different periods: 19–22 April, 27–29 April, 8–9 May, 13–14 May and 18–19 May. A maximum aerosol optical depth of about 0.12–0.13 was observed on 20 April, 22:00 UTC and 13 May, 20:30 UTC. Volcanic particles have been detected both at low altitudes, in the free troposphere and in the upper troposphere. Intrusions into the PBL have been revealed on 21–22 April and 13 May. In the April–May period Saharan dust intrusions typically occur in Southern Italy. For the period under investigations, a Saharan dust intrusion was observed on 13–14 May: dust and volcanic particles have been simultaneously observed at CIAO both at separated different levels and mixed within the same layer. Lidar ratios at 355 and 532 nm, Ångström exponent at 355/532 nm, backscatter related Ångström exponent at 532/1064 nm and particle linear depolarization ratio at 532 nm measured inside the detected volcanic layers have been discussed. The dependence of these quantities on relative humidity (RH) has been investigated by using co-located microwave profiler measurements. The particle linear depolarization ratio increasing with RH, lidar ratio values at 355 nm around 80 sr, and values of the ratio of lidar ratios greater than 1 suggest the presence of sulfates mixed with continental aerosol. Lower lidar ratio values (around 40 sr) increasing with RH and values of the ratio of lidar ratios lower than 1 indicate the presence of some aged ash inside these sulfate layers.

scholarly journals EARLINET dust observations vs. BSC-DREAM8b modeled profiles: 12-year-long systematic comparison at Potenza, Italy

2014 ◽  
Vol 14 (16) ◽  
pp. 8781-8793 ◽  
Author(s):  
L. Mona ◽  
N. Papagiannopoulos ◽  
S. Basart ◽  
J. Baldasano ◽  
I. Binietoglou ◽  
...  
Keyword(s):  
Center Of Mass ◽  
Saharan Dust ◽  
Raman Lidar ◽  
Dust Layer ◽  
Systematic Comparison ◽  
Dust Extinction ◽  
Lidar Measurements ◽  
Order Of Magnitude ◽  
Lidar Ratio ◽  
532 Nm

Abstract. In this paper, we report the first systematic comparison of 12-year modeled dust extinction profiles vs. Raman lidar measurements. We use the BSC-DREAM8b model, one of the most widely used dust regional models in the Mediterranean, and Potenza EARLINET lidar profiles for Saharan dust cases, the largest one-site database of dust extinction profiles. A total of 310 dust cases were compared for the May 2000–July 2012 period. The model reconstructs the measured layers well: profiles are correlated within 5% of significance for 60% of the cases and the dust layer center of mass as measured by lidar and modeled by BSC-DREAM8b differ on average 0.3 ± 1.0 km. Events with a dust optical depth lower than 0.1 account for 70% of uncorrelated profiles. Although there is good agreement in terms of profile shape and the order of magnitude of extinction values, the model overestimates the occurrence of dust layer top above 10 km. Comparison with extinction profiles measured by the Raman lidar shows that BSC-DREAM8b typically underestimates the dust extinction coefficient, in particular below 3 km. Lowest model–observation differences (below 17%) correspond to a lidar ratio at 532 nm and Ångström exponent at 355/532 nm of 60 ± 13 and 0.1 ± 0.6 sr, respectively. These are in agreement with values typically observed and modeled for pure desert dust. However, the highest differences (higher than 85%) are typically related to greater Ångström values (0.5 ± 0.6), denoting smaller particles. All these aspects indicate that the level of agreement decreases with an increase in mixing/modification processes.

scholarly journals Aerosol particle characteristics measured in the United Arab Emirates and their response to mixing in the boundary layer

2021 ◽  
Author(s):  
Jutta Kesti ◽  
John Backman ◽  
Ewan James O'Connor ◽  
Anne Hirsikko ◽  
Eija Asmi ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Aerosol Particle ◽  
United Arab Emirates ◽  
Wind Direction ◽  
Aerosol Particles ◽  
Surface Wind ◽  
Number Concentration ◽  
Particle Properties ◽  
Boundary Layer Height

Abstract. Aerosol particles play an important in role in the microphysics of clouds and hence on their likelihood to precipitate. In the changing climate already dry areas such as the United Arab Emirates (UAE) are predicted to become even drier. Comprehensive observations of the daily and seasonal variation in aerosol particle properties in such locations are required reducing the uncertainty in such predictions. We analyse observations from a one-year measurement campaign at a background location in the United Arab Emirates to investigate the properties of aerosol particles in this region, study the impact of boundary layer mixing on background aerosol particle properties measured at the surface and study the temporal evolution of the aerosol particle cloud formation potential in the region. We used in-situ aerosol particle measurements to characterise the aerosol particle composition, size, number and cloud condensation nuclei (CCN) properties, in-situ SO2 measurements as an anthropogenic signature and a long-range scanning Doppler lidar to provide vertical profiles of the horizontal wind and turbulent properties to monitor the evolution of the boundary layer. Anthropogenic sulphate dominated the aerosol particle mass composition in this location. There was a clear diurnal cycle in the surface wind direction, which had a strong impact on aerosol particle total number concentration, SO2 concentration and black carbon mass concentration. Local sources were the predominant source of black carbon, as concentrations clearly depended on the presence of turbulent mixing, with much higher values during calm nights. The measured concentrations of SO2, instead, were highly dependent on the surface wind direction as well as on the depth of the boundary layer when entrainment from the advected elevated layers occurred. The wind direction at the surface or of the elevated layer suggests that the cities of Dubai, Abu Dhabi and other coastal conurbations were the remote sources of SO2. We observed new aerosol particle formation events almost every day (on four days out of five on average). Calm nights had the highest CCN number concentrations and lowest κ values and activation fractions. We did not observe any clear dependence of CCN number concentration and κ parameter on the height of the daytime boundary layer, whereas the activation fraction did show a slight increase with increasing boundary layer height, due to the change in the shape of the aerosol particle size distribution where the relative portion of larger aerosol particles increased with increasing boundary layer height. We believe that this indicates that size is more important than chemistry for aerosol particle CCN activation at this site. The combination of instrumentation used in this campaign enabled us to identify periods when anthropogenic pollution from remote sources that had been transported in elevated layers was present, and had been mixed down to the surface in the growing boundary layer.

scholarly journals Lidar Measuremnt on Dust Transport from the Saharan Desert to the Iran Plateau

2020 ◽  
Vol 237 ◽  
pp. 02020
Author(s):  
Hossein Panahifar ◽  
Ruhollah Moradhaseli ◽  
Hadi Bourzoie ◽  
Mahdi Gholami ◽  
Hamid Reza Khalesifard
Keyword(s):  
Trajectory Analysis ◽  
Saharan Dust ◽  
Dust Particles ◽  
Raman Lidar ◽  
Dust Layer ◽  
Mean Values ◽  
Dust Transport ◽  
Lidar Ratio ◽  
532 Nm ◽  
Iran Plateau

Optical properties of long-range Saharan dust particles transported to the Iran Plateau have been investigated. The results were derived from the measurements of a dual-wavelength Depolarized backscatter/Raman lidar and a Cimel CE318-2 sunphotometer. Observations were performed in Zanjan, Northwest Iran. The backward trajectory analysis show that the lofted dust plumes come from the Saharan desert and travel along Mediterranean Sea and Turkey toward Iran. The lidar ratio within the lofted dust layer has been found with mean values of 50 sr at 532 nm. For the depolarization ratio, mean values of 25% have been found.

scholarly journals Long-term profiling of mineral dust and pollution aerosol with multiwavelength polarization/Raman lidar at the Central Asian site of Dushanbe, Tajikistan: Case studies

2017 ◽  
Author(s):  
Julian Hofer ◽  
Dietrich Althausen ◽  
Sabur F. Abdullaev ◽  
Abduvosit N. Makhmudov ◽  
Bakhron I. Nazarov ◽  
...  
Keyword(s):  
Middle Eastern ◽  
Asian Dust ◽  
Raman Lidar ◽  
Dust Event ◽  
Angstrom Exponent ◽  
Central Asian ◽  
Ångström Exponent ◽  
Lidar Ratio ◽  
532 Nm ◽  
Ångstrom Exponent

Abstract. For the first time, continuous vertically resolved aerosol measurements were performed by lidar in Tajikistan, Central Asia. Observations with the multiwavelength polarization/Raman lidar PollyXT were conducted during CADEX (Central Asian Dust EXperiment) in Dushanbe, Tajikistan, from March 2015 to August 2016. Co-located with the lidar a sun photometer was operated. The goal of CADEX is to provide an unprecedented data set on vertically resolved aerosol optical properties in Central Asia, an area highly affected by climate change but largely missing vertically resolved aerosol measurements. During the 18-months measurement campaign, mineral dust was detected frequently from ground to cirrus level height. In this study, an overview of the measurement period is given and four typical but different example measurement cases are discussed in detail. Three of them are dust cases and one is a contrasting pollution aerosol case. Vertical profiles of the measured optical properties and the calculated dust and non-dust mass concentrations are presented. Dust source regions were identified by means of backward trajectory analyses. A lofted layer of Middle Eastern dust with an aerosol optical thickness (AOT) of 0.4 and an extinction-related Ångström exponent of 0.41 was measured. In comparison, two near-ground dust cases have Central Asian sources. One is an extreme dust event with an AOT of 1.5 and Ångström exponent of 0.12 and the other one is a most extreme dust event with an AOT of above 4 (measured by sun photometer) and an Ångström exponent of −0.08. The observed lidar ratios (particle linear depolarization ratios) in the presented dust cases range from 40.3 sr to 46.9 sr (0.18–0.29) at 355 nm and from 35.7 sr to 42.9 sr (0.31–0.35) at 532 nm wavelength. The particle linear depolarization ratios indicate almost unpolluted dust in the case of a lofted dust layer and pure dust in the near-ground dust cases. The lidar ratio values are lower than typical lidar ratio values for Saharan dust (50–60 sr) and comparable to Middle Eastern/West-Asian dust lidar ratios (35–45 sr). In contrast, the presented case of pollution aerosol of local origin has an Ångström exponent of 2.07 and a lidar ratio (particle linear depolarization ratio) of 55.8 sr (0.03) at 355 nm and 32.8 sr (0.08) at 532 nm wavelength.

Sign in / Sign up

Export Citation Format

Share Document