scholarly journals Lidar Measuremnt on Dust Transport from the Saharan Desert to the Iran Plateau

2020 ◽  
Vol 237 ◽  
pp. 02020
Author(s):  
Hossein Panahifar ◽  
Ruhollah Moradhaseli ◽  
Hadi Bourzoie ◽  
Mahdi Gholami ◽  
Hamid Reza Khalesifard
Keyword(s):  
Trajectory Analysis ◽  
Saharan Dust ◽  
Dust Particles ◽  
Raman Lidar ◽  
Dust Layer ◽  
Mean Values ◽  
Dust Transport ◽  
Lidar Ratio ◽  
532 Nm ◽  
Iran Plateau

Optical properties of long-range Saharan dust particles transported to the Iran Plateau have been investigated. The results were derived from the measurements of a dual-wavelength Depolarized backscatter/Raman lidar and a Cimel CE318-2 sunphotometer. Observations were performed in Zanjan, Northwest Iran. The backward trajectory analysis show that the lofted dust plumes come from the Saharan desert and travel along Mediterranean Sea and Turkey toward Iran. The lidar ratio within the lofted dust layer has been found with mean values of 50 sr at 532 nm. For the depolarization ratio, mean values of 25% have been found.

scholarly journals EARLINET dust observations vs. BSC-DREAM8b modeled profiles: 12-year-long systematic comparison at Potenza, Italy

2014 ◽  
Vol 14 (16) ◽  
pp. 8781-8793 ◽  
Author(s):  
L. Mona ◽  
N. Papagiannopoulos ◽  
S. Basart ◽  
J. Baldasano ◽  
I. Binietoglou ◽  
...  
Keyword(s):  
Center Of Mass ◽  
Saharan Dust ◽  
Raman Lidar ◽  
Dust Layer ◽  
Systematic Comparison ◽  
Dust Extinction ◽  
Lidar Measurements ◽  
Order Of Magnitude ◽  
Lidar Ratio ◽  
532 Nm

Abstract. In this paper, we report the first systematic comparison of 12-year modeled dust extinction profiles vs. Raman lidar measurements. We use the BSC-DREAM8b model, one of the most widely used dust regional models in the Mediterranean, and Potenza EARLINET lidar profiles for Saharan dust cases, the largest one-site database of dust extinction profiles. A total of 310 dust cases were compared for the May 2000–July 2012 period. The model reconstructs the measured layers well: profiles are correlated within 5% of significance for 60% of the cases and the dust layer center of mass as measured by lidar and modeled by BSC-DREAM8b differ on average 0.3 ± 1.0 km. Events with a dust optical depth lower than 0.1 account for 70% of uncorrelated profiles. Although there is good agreement in terms of profile shape and the order of magnitude of extinction values, the model overestimates the occurrence of dust layer top above 10 km. Comparison with extinction profiles measured by the Raman lidar shows that BSC-DREAM8b typically underestimates the dust extinction coefficient, in particular below 3 km. Lowest model–observation differences (below 17%) correspond to a lidar ratio at 532 nm and Ångström exponent at 355/532 nm of 60 ± 13 and 0.1 ± 0.6 sr, respectively. These are in agreement with values typically observed and modeled for pure desert dust. However, the highest differences (higher than 85%) are typically related to greater Ångström values (0.5 ± 0.6), denoting smaller particles. All these aspects indicate that the level of agreement decreases with an increase in mixing/modification processes.

scholarly journals Characterization of smoke and dust episode over West Africa: comparison of MERRA-2 modeling with multiwavelength Mie–Raman lidar observations

2018 ◽  
Vol 11 (2) ◽  
pp. 949-969 ◽  
Author(s):  
Igor Veselovskii ◽  
Philippe Goloub ◽  
Thierry Podvin ◽  
Didier Tanre ◽  
Arlindo da Silva ◽  
...  
Keyword(s):  
West Africa ◽  
Mean Value ◽  
Dust Particles ◽  
Raman Lidar ◽  
Near Surface ◽  
Dust Layer ◽  
Extinction Coefficients ◽  
Surface Dust ◽  
Smoke Layer ◽  
Lidar Ratio

Abstract. Observations of multiwavelength Mie–Raman lidar taken during the SHADOW field campaign are used to analyze a smoke–dust episode over West Africa on 24–27 December 2015. For the case considered, the dust layer extended from the ground up to approximately 2000 m while the elevated smoke layer occurred in the 2500–4000 m range. The profiles of lidar measured backscattering, extinction coefficients, and depolarization ratios are compared with the vertical distribution of aerosol parameters provided by the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2). The MERRA-2 model simulated the correct location of the near-surface dust and elevated smoke layers. The values of modeled and observed aerosol extinction coefficients at both 355 and 532 nm are also rather close. In particular, for the episode reported, the mean value of difference between the measured and modeled extinction coefficients at 355 nm is 0.01 km−1 with SD of 0.042 km−1. The model predicts significant concentration of dust particles inside the elevated smoke layer, which is supported by an increased depolarization ratio of 15 % observed in the center of this layer. The modeled at 355 nm the lidar ratio of 65 sr in the near-surface dust layer is close to the observed value (70 ± 10) sr. At 532 nm, however, the simulated lidar ratio (about 40 sr) is lower than measurements (55 ± 8 sr). The results presented demonstrate that the lidar and model data are complimentary and the synergy of observations and models is a key to improve the aerosols characterization.

scholarly journals Optical properties of long-range transported Saharan dust over Barbados as measured by dual-wavelength depolarization Raman lidar measurements

2015 ◽  
Vol 15 (19) ◽  
pp. 11067-11080 ◽  
Author(s):  
S. Groß ◽  
V. Freudenthaler ◽  
K. Schepanski ◽  
C. Toledano ◽  
A. Schäfler ◽  
...  
Keyword(s):  
Optical Properties ◽  
Aerosol Optical Depth ◽  
Long Range ◽  
Optical Depth ◽  
Layer Structure ◽  
Dual Wavelength ◽  
Saharan Dust ◽  
Dust Layer ◽  
Mean Values ◽  
532 Nm

Abstract. Dual-wavelength Raman and depolarization lidar observations were performed during the Saharan Aerosol Long-range Transport and Aerosol-Cloud interaction Experiment in Barbados in June and July 2013 to characterize the optical properties and vertical distribution of long-range transported Saharan dust after transport across the Atlantic Ocean. Four major dust events were studied during the measurements from 15 June to 13 July 2013 with aerosol optical depths at 532 nm of up to 0.6. The vertical aerosol distribution was characterized by a three-layer structure consisting of the boundary layer, the entrainment or mixing layer and the pure Saharan dust layer. The upper boundary of the pure dust layer reached up to 4.5 km in height. The contribution of the pure dust layer was about half of the total aerosol optical depth at 532 nm. The total dust contribution was about 50–70 % of the total aerosol optical depth at 532 nm. The lidar ratio within the pure dust layer was found to be wavelength independent with mean values of 53 ± 5 sr at 355 nm and 56 ± 7 sr at 532 nm. For the particle linear depolarization ratio, wavelength-independent mean values of 0.26 ± 0.03 at 355 nm and 0.27 ± 0.01 at 532 nm have been found.

scholarly journals Characterization of smoke/dust episode over West Africa: comparison of MERRA-2 modeling with multiwavelength Mie-Raman lidar observations

2017 ◽  
Author(s):  
Igor Veselovskii ◽  
Philippe Goloub ◽  
Thierry Podvin ◽  
Didier Tanre ◽  
Arlindo da Silva ◽  
...  
Keyword(s):  
West Africa ◽  
Dust Particles ◽  
Raman Lidar ◽  
Near Surface ◽  
Smoke Layer ◽  
Correct Location ◽  
Fine Mode ◽  
Lidar Ratio ◽  
Aerosol Parameters ◽  
532 Nm

Abstract. Observations of multiwavelength Mie-Raman lidar taken during the SHADOW field campaign are used to analyze a smoke/dust episode over West Africa on 24–27 December 2015. For the case considered, the dust layer extended from the ground up to approximately 2000 m while the elevated smoke layer occurred in the 2500 m–4000 m range. The profiles of lidar measured backscattering, extinction coefficients and depolarization ratios are compared with the vertical distribution of aerosol parameters provided by the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2). The MERRA-2 model simulated the correct location of the near–surface dust and elevated smoke layers. The values of modeled and observed extinctions at both 355 nm and 532 nm are also rather close. Good coherence between measured and modeled extinction profiles provides an opportunity to test how well the model reproduces backscattering of dust particles at different wavelengths. The comparison shows good agreement of modeled and measured backscattering coefficients at 355 nm, meaning that the modeled dust lidar ratio of 65 sr in the near-surface layer is close to the observed value. At 532 nm however, the simulated lidar ratio is lower than measurements (about 40 sr and 50 sr respectively). The reason for this disagreement could be that the assumed imaginary part of the refractive index for dust (0.0025 at 532 nm) is too low, or that the particle size distribution in the model is too much weighted toward fine mode dust. The model predicts significant concentration of dust particles inside the smoke layer. This is supported by a high depolarization ratio of 15 % observed in the center of this layer. The backscattering Ångström exponent at 355/532 nm as well as both lidar ratios have a minimum in the center of the elevated layer, which can also be explained by the presence of dust.

scholarly journals Optical-microphysical properties of Saharan dust aerosols and composition relationship using a multi-wavelength Raman lidar, in situ sensors and modelling: a case study analysis

2012 ◽  
Vol 12 (9) ◽  
pp. 4011-4032 ◽  
Author(s):  
A. Papayannis ◽  
R. E. Mamouri ◽  
V. Amiridis ◽  
E. Remoundaki ◽  
G. Tsaknakis ◽  
...  
Keyword(s):  
Refractive Index ◽  
Saharan Dust ◽  
Dust Particles ◽  
Raman Lidar ◽  
Dust Event ◽  
Aerosol Composition ◽  
Data Set ◽  
Microphysical Properties ◽  
The Mean ◽  
532 Nm

Abstract. A strong Saharan dust event that occurred over the city of Athens, Greece (37.9° N, 23.6° E) between 27 March and 3 April 2009 was followed by a synergy of three instruments: a 6-wavelength Raman lidar, a CIMEL sun-sky radiometer and the MODIS sensor. The BSC-DREAM model was used to forecast the dust event and to simulate the vertical profiles of the aerosol concentration. Due to mixture of dust particles with low clouds during most of the reported period, the dust event could be followed by the lidar only during the cloud-free day of 2 April 2009. The lidar data obtained were used to retrieve the vertical profile of the optical (extinction and backscatter coefficients) properties of aerosols in the troposphere. The aerosol optical depth (AOD) values derived from the CIMEL ranged from 0.33–0.91 (355 nm) to 0.18–0.60 (532 nm), while the lidar ratio (LR) values retrieved from the Raman lidar ranged within 75–100 sr (355 nm) and 45–75 sr (532 nm). Inside a selected dust layer region, between 1.8 and 3.5 km height, mean LR values were 83 ± 7 and 54 ± 7 sr, at 355 and 532 nm, respectively, while the Ångström-backscatter-related (ABR355/532) and Ångström-extinction-related (AER355/532) were found larger than 1 (1.17 ± 0.08 and 1.11 ± 0.02, respectively), indicating mixing of dust with other particles. Additionally, a retrieval technique representing dust as a mixture of spheres and spheroids was used to derive the mean aerosol microphysical properties (mean and effective radius, number, surface and volume density, and mean refractive index) inside the selected atmospheric layers. Thus, the mean value of the retrieved refractive index was found to be 1.49( ± 0.10) + 0.007( ± 0.007)i, and that of the effective radiuses was 0.30 ± 0.18 μm. The final data set of the aerosol optical and microphysical properties along with the water vapor profiles obtained by Raman lidar were incorporated into the ISORROPIA II model to provide a possible aerosol composition consistent with the retrieved refractive index values. Thus, the inferred chemical properties showed 12–40% of dust content, sulfate composition of 16–60%, and organic carbon content of 15–64%, indicating a possible mixing of dust with haze and smoke. PM10 concentrations levels, PM10 composition results and SEM-EDX (Scanning Electron Microscope-Energy Dispersive X-ray) analysis results on sizes and mineralogy of particles from samples during the Saharan dust transport event were used to evaluate the retrieval.

scholarly journals Multi-wavelength Raman lidar observations of the Eyjafjallajökull volcanic cloud over Potenza, Southern Italy

2011 ◽  
Vol 11 (4) ◽  
pp. 12763-12803 ◽  
Author(s):  
L. Mona ◽  
A. Amodeo ◽  
G. D'Amico ◽  
A. Giunta ◽  
F. Madonna ◽  
...  
Keyword(s):  
Southern Italy ◽  
Saharan Dust ◽  
Depolarization Ratio ◽  
Raman Lidar ◽  
Lidar Measurements ◽  
Ångström Exponent ◽  
Multi Wavelength ◽  
Lidar Ratio ◽  
Linear Depolarization Ratio ◽  
532 Nm

Abstract. Multi-wavelength Raman lidar measurements were performed at CNR-IMAA Atmospheric Observatory (CIAO) during the entire Eyjafjallajökull explosive eruptive period in April–May 2010, whenever weather conditions permitted. A methodology for volcanic layer identification and accurate aerosol typing has been developed on the basis both of the multi-wavelength Raman lidar measurements and EARLINET measurements performed at CIAO since 2000. The aerosol mask for lidar measurements performed at CIAO during the 2010 Eyjafjallajökull eruption has been obtained. Volcanic aerosol layers have been observed in different periods: 19–22 April, 27–29 April, 8–9 May, 13–14 May and 18–19 May. A maximum aerosol optical depth of about 0.12–0.13 was observed on 20 April, 22:00 UTC and 13 May, 20:30 UTC. Volcanic particles have been detected both at low altitudes, in the free troposphere and in the upper troposphere. Intrusions into the PBL have been revealed on 21–22 April and 13 May. In the April–May period Saharan dust intrusions typically occur in Southern Italy. For the period under investigations, a Saharan dust intrusion was observed on 13–14 May: dust and volcanic particles have been simultaneously observed at CIAO both at separated different levels and mixed within the same layer. Lidar ratios at 355 and 532 nm, Ångström exponent at 355/532 nm, backscatter related Ångström exponent at 532/1064 nm and particle linear depolarization ratio at 532 nm measured inside the detected volcanic layers have been discussed. The dependence of these quantities on relative humidity (RH) has been investigated by using co-located microwave profiler measurements. The particle linear depolarization ratio increasing with RH, lidar ratio values at 355 nm around 80 sr, and values of the ratio of lidar ratios greater than 1 suggest the presence of sulfates mixed with continental aerosol. Lower lidar ratio values (around 40 sr) increasing with RH and values of the ratio of lidar ratios lower than 1 indicate the presence of some aged ash inside these sulfate layers.

scholarly journals February 2017 extreme Saharan dust outbreak in the Iberian Peninsula: from lidar-derived optical properties to evaluation of forecast models

2018 ◽  
Author(s):  
Alfonso J. Fernández ◽  
Michaël Sicard ◽  
Maria J. Costa ◽  
Juan L. Guerrero-Rascado ◽  
José L. Gómez-Amo ◽  
...  
Keyword(s):  
Optical Properties ◽  
Iberian Peninsula ◽  
Saharan Dust ◽  
Aerosol Optical Properties ◽  
Dust Layer ◽  
Dust Transport ◽  
Forecast Models ◽  
Winter Time ◽  
532 Nm ◽  
Limited Height

Abstract. An unprecedented extreme Saharan dust event was registered in winter time from 20 to 23 February 2017 over the Iberian Peninsula (IP). We report on aerosol optical properties observed under this extreme dust outbreak through remote sensing (active and passive) techniques. For that, EARLINET (European Aerosol Research LIdar NETwork) lidar and AERONET (AErosol RObotic NETwork) Sun-photometer Cimel CE 318 measurements are used. The sites considered are: Barcelona (41.38º N, 2.17º E), Burjassot (39.51º N, 0.42º W), Cabo da Roca (38.78º N, 9.50º W), Évora (38.57º N, 7.91º W), Granada (37.16º N, 3.61º W) and Madrid (40.45º N, 3.72º W). In general, large aerosol optical depths (AOD) and low Ångström exponents (AE) are observed. An AOD of 2.0 at 675 nm is reached in several stations. Maximum values of AOD675 of 2.5 are registered in Évora. During and around the peak of AOD675, AEs close to 0 are measured. With regard to vertically-resolved aerosol optical properties, particle backscatter coefficients as high as 1.5∙10−5 m−1 sr−1 at 355 nm are recorded at every lidar stations. Mean lidar ratios are found in the range 40–55 sr at 355 nm and 34–61 sr at 532 nm during the event inside the dust layer. Mean particle and volume depolarization ratios are found to be very consistent between lidar stations. They range 0.19–0.31 and 0.12–0.26 respectively. The optical properties are also found very stable with height in the dust layer. Another remarkable aspect of the event is the limited height of the dust transport which is found between the ground and 5 km. Our vertically-resolved aerosol properties are also used to estimate the performances of two dust models, namely BSC-DREAM8b and NMMB/BSC-Dust, in order to evaluate their forecast skills in such intense dust outbreaks. We found that forecasts provided by the NMMB/BSC-Dust show a better agreement with observations than the ones from BSC-DREAM8b. The BSC-DREAM8b forecasts (24 h) present a large underestimation during the event. No clear degradation of the prognostics is appreciated in 24, 48, 72 h except for the Barcelona station.

scholarly journals Characterization of long-range transported Saharan dust at the Caribbean by dual-wavelength depolarization Raman lidar measurements

2015 ◽  
Vol 15 (13) ◽  
pp. 19325-19366 ◽  
Author(s):  
S. Groß ◽  
V. Freudenthaler ◽  
K. Schepanski ◽  
C. Toledano ◽  
A. Schäfler ◽  
...  
Keyword(s):  
Long Range ◽  
Layer Structure ◽  
Mixing Layer ◽  
Dual Wavelength ◽  
Saharan Dust ◽  
Dust Layer ◽  
Mean Values ◽  
Linear Depolarization Ratio ◽  
Dust Events ◽  
532 Nm

Abstract. Dual-wavelength Raman and depolarization lidar observations were performed during the SALTRACE campaign at Barbados in June and July 2013 to characterize the optical properties and vertical distribution of long-range transported Saharan dust at the end of its way across the Atlantic Ocean. Four major dust events were studied during the measurements from 15 June to 13 July 2013 with aerosol optical depths of up to 0.6. The vertical aerosol distribution was characterized by a three-layer structure consisting of the boundary layer, the entrainment or mixing layer, and the pure Saharan dust layer. The upper boundary of the pure dust layer reached up to 4.5 km height. The contribution of the pure dust layer was about half of the total AOD. The total dust contribution was about 50–70 % of the total AOD. The lidar ratio within the pure dust layer was found to be wavelength independent with mean values of 53 ± 5 sr at 355 nm and 56 ± 7 sr at 532 nm. For the particle linear depolarization ratio wavelength independent mean values of 0.26 ± 0.03 at 355 nm and 0.27 ± 0.01 at 532 nm have been found.

scholarly journals Evaluation of the Lidar/Radiometer Inversion Code (LIRIC) to determine microphysical properties of volcanic and desert dust

2013 ◽  
Vol 6 (1) ◽  
pp. 911-948 ◽  
Author(s):  
J. Wagner ◽  
A. Ansmann ◽  
U. Wandinger ◽  
P. Seifert ◽  
A. Schwarz ◽  
...  
Keyword(s):  
Theoretical Background ◽  
Saharan Dust ◽  
Dust Particles ◽  
Raman Lidar ◽  
Particle Volume ◽  
Microphysical Properties ◽  
Fine Mode ◽  
Lidar Ratio ◽  
Lidar Observations ◽  
Good Agreement

Abstract. The Lidar/Radiometer Inversion Code (LIRIC) combines the multiwavelength lidar technique with sun-sky photometry and allows us to retrieve vertical profiles of particle optical and microphysical properties, separately for fine-mode and coarse-mode particles. After a brief presentation of the theoretical background, we evaluate the potential of LIRIC to retrieve the optical and microphysical properties of irregularly shaped dust particles. The method is applied to two very different aerosol scenarios, a strong Saharan dust outbreak towards central Europe and an Eyjafjallajökull volcanic dust event. LIRIC profiles of particle volume and mass concentrations are compared with results obtained with the polarization-lidar-based POLIPHON method. LIRIC profiles of optical properties such as particle backscatter coefficients, lidar ratio, Ångström exponent, and particle depolarization ratio are compared with direct Raman lidar observations. Good agreement between the different results are found for most of the retrieval products.

scholarly journals Saharan dust and giant quartz particle transport towards Iceland

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
György Varga ◽  
Pavla Dagsson-Walhauserová ◽  
Fruzsina Gresina ◽  
Agusta Helgadottir
Keyword(s):  
Numerical Models ◽  
Saharan Dust ◽  
Atmospheric Environment ◽  
The Arctic ◽  
Dust Particles ◽  
Atmospheric Flow ◽  
Dust Transport ◽  
Strong Winds ◽  
Dust Events ◽  
Local Dust

AbstractMineral dust emissions from Saharan sources have an impact on the atmospheric environment and sedimentary units in distant regions. Here, we present the first systematic observations of long-range Saharan dust transport towards Iceland. Fifteen Saharan dust episodes were identified to have occurred between 2008 and 2020 based on aerosol optical depth data, backward trajectories and numerical models. Icelandic samples from the local dust sources were compared with deposited dust from two severe Saharan dust events in terms of their granulometric and mineralogical characteristics. The episodes were associated with enhanced meridional atmospheric flow patterns driven by unusual meandering jets. Strong winds were able to carry large Saharan quartz particles (> 100 µm) towards Iceland. Our results confirm the atmospheric pathways of Saharan dust towards the Arctic, and identify new northward meridional long-ranged transport of giant dust particles from the Sahara, including the first evidence of their deposition in Iceland as previously predicted by models.

Sign in / Sign up

Export Citation Format

Share Document