Lower crustal structures at Rockall Trough (west of Ireland) by Full waveform inversion

2020 ◽  
Author(s):  
Gaurav Tomar ◽  
Christopher J. Bean ◽  
Satish C. Singh
Keyword(s):  
Travel Time ◽  
Seismic Data ◽  
High Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Full Waveform ◽  
Travel Time Tomography ◽  
Rockall Trough

<p>Rockall trough lies to the west of Ireland in NE Atlantic, it has a complex geology and has been debated for controversial geology for more than two decades. We have performed Full waveform inversion (FWI) on 2D seismic data set that is recorded in 2013-14 by using 10 km long streamer, this 2D seismic line is situated near the North-West margin in the Rockall Bank area. Full waveform inversion (FWI) is a powerful technique for obtaining elastic properties of the sub-surface from the seismic data. FWI provides properties of the sub-surface at the scale of the wavelength of the data set. We used travel time tomography on downward extrapolated data set to obtain a smooth starting velocity model for FWI. Downward continuation is a technique that enhances the first arrival and also reduces the computation time for forward modelling in FWI. The velocity model obtained from refraction travel time tomography, indicates the velocity from 1.6-4 km/s for the sediments and we have also observed very high velocity ~ 6-7.5 km/s just 3 km below sea-floor. We have performed FWI using these TTT velocity model as a starting model and inverted the refractions along with the wide angle reflections in the frequency range of 3-10 hz. FWI results gives the velocity of 6-7.2 km/s as well as defines geological structures that can be seen in the migrated seismic section. These high velocity structures could be a part of the continental crust and/or lower oceanic crustal igneous rocks like Gabbro.</p>

scholarly journals Full waveform inversion of short-offset, band-limited seismic data inthe Alboran basin (SE Iberia)

2019 ◽  
Author(s):  
Clàudia Gras ◽  
Valentí Sallarès ◽  
Daniel Dagnino ◽  
C. Estela Jiménez ◽  
Adrià Meléndez ◽  
...  
Keyword(s):  
Travel Time ◽  
Seismic Data ◽  
Waveform Inversion ◽  
Velocity Model ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Time Inversion ◽  
Full Waveform ◽  
Travel Time Tomography ◽  
Band Limited

Abstract. We present a high-resolution P-wave velocity model of the sedimentary cover and the uppermost basement until ~ 3 km depth obtained by full-waveform inversion of multichannel seismic data acquired with a 6 km-long streamer in the Alboran Sea (SE Iberia). The inherent non-linearity of the method, especially for short-offset, band-limited seismic data as this one, is circumvented by applying a data processing/modeling sequence consisting of three steps: (1) data re-datuming by back-propagation of the recorded seismograms to the seafloor; (2) joint refraction and reflection travel-time tomography combining the original and the re-datumed shot gathers; and (3) FWI of the original shot gathers using the model obtained by travel-time tomography as initial reference. The final velocity model shows a number of geological structures that cannot be identified in the travel-time tomography models or easily interpreted from seismic reflection images alone. A sharp strong velocity contrast accurately defines the geometry of the top of the basement. Several low-velocity zones that may correspond to the abrupt velocity change across steeply dipping normal faults are observed at the flanks of the basin. A 200–300 m thick, high-velocity layer embedded within lower velocity sediment may correspond to evaporites deposited during the Messinian crisis. The results confirm that the combination of data re-datuming and joint refraction and reflection travel-time inversion provides reference models that are accurate enough to apply full-waveform inversion to relatively short offset streamer data in deep water settings starting at field-data standard low frequency content of 6 Hz.

scholarly journals Full-waveform inversion of short-offset, band-limited seismic data in the Alboran Basin (SE Iberia)

Solid Earth ◽  
2019 ◽  
Vol 10 (6) ◽  
pp. 1833-1855
Author(s):  
Clàudia Gras ◽  
Daniel Dagnino ◽  
Clara Estela Jiménez-Tejero ◽  
Adrià Meléndez ◽  
Valentí Sallarès ◽  
...  
Keyword(s):  
Travel Time ◽  
Seismic Data ◽  
Waveform Inversion ◽  
Velocity Model ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Time Inversion ◽  
Full Waveform ◽  
Travel Time Tomography ◽  
Band Limited

Abstract. We present a high-resolution P-wave velocity model of the sedimentary cover and the uppermost basement to ∼3 km depth obtained by full-waveform inversion of multichannel seismic data acquired with a 6 km long streamer in the Alboran Sea (SE Iberia). The inherent non-linearity of the method, especially for short-offset, band-limited seismic data as this one, is circumvented by applying a data processing or modelling sequence consisting of three steps: (1) data re-datuming by back-propagation of the recorded seismograms to the seafloor; (2) joint refraction and reflection travel-time tomography combining the original and the re-datumed shot gathers; and (3) full-waveform inversion of the original shot gathers using the model obtained by travel-time tomography as initial reference. The final velocity model shows a number of geological structures that cannot be identified in the travel-time tomography models or easily interpreted from seismic reflection images alone. A sharp strong velocity contrast accurately defines the geometry of the top of the basement. Several low-velocity zones that may correspond to the abrupt velocity change across steeply dipping normal faults are observed at the flanks of the basin. A 200–300 m thick, high-velocity layer embedded within lower-velocity sediment may correspond to evaporites deposited during the Messinian crisis. The results confirm that the combination of data re-datuming and joint refraction and reflection travel-time inversion provides reference models that are accurate enough to apply full-waveform inversion to relatively short offset streamer data in deep-water settings starting at a field-data standard low-frequency content of 6 Hz.

Anisotropic 3D full-waveform inversion

Geophysics ◽  
2013 ◽  
Vol 78 (2) ◽  
pp. R59-R80 ◽  
Author(s):  
Michael Warner ◽  
Andrew Ratcliffe ◽  
Tenice Nangoo ◽  
Joanna Morgan ◽  
Adrian Umpleby ◽  
...  
Keyword(s):  
High Velocity ◽  
Field Data ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Low Velocity ◽  
Data Set ◽  
Reflection Data ◽  
Full Waveform ◽  
Gas Cloud

We have developed and implemented a robust and practical scheme for anisotropic 3D acoustic full-waveform inversion (FWI). We demonstrate this scheme on a field data set, applying it to a 4C ocean-bottom survey over the Tommeliten Alpha field in the North Sea. This shallow-water data set provides good azimuthal coverage to offsets of 7 km, with reduced coverage to a maximum offset of about 11 km. The reservoir lies at the crest of a high-velocity antiformal chalk section, overlain by about 3000 m of clastics within which a low-velocity gas cloud produces a seismic obscured area. We inverted only the hydrophone data, and we retained free-surface multiples and ghosts within the field data. We invert in six narrow frequency bands, in the range 3 to 6.5 Hz. At each iteration, we selected only a subset of sources, using a different subset at each iteration; this strategy is more efficient than inverting all the data every iteration. Our starting velocity model was obtained using standard PSDM model building including anisotropic reflection tomography, and contained epsilon values as high as 20%. The final FWI velocity model shows a network of shallow high-velocity channels that match similar features in the reflection data. Deeper in the section, the FWI velocity model reveals a sharper and more-intense low-velocity region associated with the gas cloud in which low-velocity fingers match the location of gas-filled faults visible in the reflection data. The resulting velocity model provides a better match to well logs, and better flattens common-image gathers, than does the starting model. Reverse-time migration, using the FWI velocity model, provides significant uplift to the migrated image, simplifying the planform of the reservoir section at depth. The workflows, inversion strategy, and algorithms that we have used have broad application to invert a wide-range of analogous data sets.

Innovative application of full-waveform inversion applied to extended wide-azimuth marine streamer seismic in a complex salt environment

Geophysics ◽  
2022 ◽  
pp. 1-51
Author(s):  
Peter Lanzarone ◽  
Xukai Shen ◽  
Andrew Brenders ◽  
Ganyuan Xia ◽  
Joe Dellinger ◽  
...  
Keyword(s):  
Seismic Data ◽  
Model Building ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Complex Salt ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Full Waveform ◽  
Velocity Model Building ◽  
Reservoir Systems

We demonstrated the application of full-waveform inversion (FWI) guided velocity model building to an extended wide-azimuth towed streamer (EWATS) seismic data set in the Gulf of Mexico. Field data were collected over a historically challenging imaging area, colloquially called the “grunge zone” due to the formation of a compressional allosuture emplaced between two colliding salt sheets. These data had a poor subsalt image below the suture with conventional narrow-azimuth data. Additional geologic complexities were observed including high-velocity carbonate carapace near the top of salt and multiple intrasalt sedimentary inclusions. As such, improved seismic imaging was required to plan and execute wells targeting subsalt strata. Significant improvements to the velocity model and subsalt image were evident with wide-azimuth towed streamer and later EWATS data using conventional top-down velocity model building approaches. Then, high-impact improvements were made using EWATS data with an FWI velocity model building workflow; this study represented an early successful application of FWI used to update salt body geometries from streamer seismic data, in which many past applications were limited to improving sedimentary velocities. Later petrophysical data verified the new FWI-derived model, which had significantly increased confidence in the structural and stratigraphic interpretation of subsalt reservoir systems below the grunge zone.

scholarly journals Full-Waveform Inversion for Imaging Faulted Structures: A Case Study from the Japan Trench Forearc Slope

2021 ◽  
Author(s):  
Ehsan Jamali Hondori ◽  
Chen Guo ◽  
Hitoshi Mikada ◽  
Jin-Oh Park
Keyword(s):  
Seismic Data ◽  
Initial Velocity ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Control Measures ◽  
Japan Trench ◽  
Full Waveform Inversion ◽  
Full Waveform ◽  
Time Migration ◽  
Shallow Sediments

AbstractFull-waveform inversion (FWI) of limited-offset marine seismic data is a challenging task due to the lack of refracted energy and diving waves from the shallow sediments, which are fundamentally required to update the long-wavelength background velocity model in a tomographic fashion. When these events are absent, a reliable initial velocity model is necessary to ensure that the observed and simulated waveforms kinematically fit within an error of less than half a wavelength to protect the FWI iterative local optimization scheme from cycle skipping. We use a migration-based velocity analysis (MVA) method, including a combination of the layer-stripping approach and iterations of Kirchhoff prestack depth migration (KPSDM), to build an accurate initial velocity model for the FWI application on 2D seismic data with a maximum offset of 5.8 km. The data are acquired in the Japan Trench subduction zone, and we focus on the area where the shallow sediments overlying a highly reflective basement on top of the Cretaceous erosional unconformity are severely faulted and deformed. Despite the limited offsets available in the seismic data, our carefully designed workflow for data preconditioning, initial model building, and waveform inversion provides a velocity model that could improve the depth images down to almost 3.5 km. We present several quality control measures to assess the reliability of the resulting FWI model, including ray path illuminations, sensitivity kernels, reverse time migration (RTM) images, and KPSDM common image gathers. A direct comparison between the FWI and MVA velocity profiles reveals a sharp boundary at the Cretaceous basement interface, a feature that could not be observed in the MVA velocity model. The normal faults caused by the basal erosion of the upper plate in the study area reach the seafloor with evident subsidence of the shallow strata, implying that the faults are active.

Tackling cycle skipping in full-waveform inversion with intermediate data

Geophysics ◽  
2019 ◽  
Vol 84 (3) ◽  
pp. R411-R427 ◽  
Author(s):  
Gang Yao ◽  
Nuno V. da Silva ◽  
Michael Warner ◽  
Di Wu ◽  
Chenhao Yang
Keyword(s):  
Objective Function ◽  
Waveform Inversion ◽  
Synthetic Data ◽  
Velocity Model ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Intermediate Data ◽  
Full Waveform ◽  
L2 Norm ◽  
Recorded Data

Full-waveform inversion (FWI) is a promising technique for recovering the earth models for exploration geophysics and global seismology. FWI is generally formulated as the minimization of an objective function, defined as the L2-norm of the data residuals. The nonconvex nature of this objective function is one of the main obstacles for the successful application of FWI. A key manifestation of this nonconvexity is cycle skipping, which happens if the predicted data are more than half a cycle away from the recorded data. We have developed the concept of intermediate data for tackling cycle skipping. This intermediate data set is created to sit between predicted and recorded data, and it is less than half a cycle away from the predicted data. Inverting the intermediate data rather than the cycle-skipped recorded data can then circumvent cycle skipping. We applied this concept to invert cycle-skipped first arrivals. First, we picked up the first breaks of the predicted data and the recorded data. Second, we linearly scaled down the time difference between the two first breaks of each shot into a series of time shifts, the maximum of which was less than half a cycle, for each trace in this shot. Third, we moved the predicted data with the corresponding time shifts to create the intermediate data. Finally, we inverted the intermediate data rather than the recorded data. Because the intermediate data are not cycle-skipped and contain the traveltime information of the recorded data, FWI with intermediate data updates the background velocity model in the correct direction. Thus, it produces a background velocity model accurate enough for carrying out conventional FWI to rebuild the intermediate- and short-wavelength components of the velocity model. Our numerical examples using synthetic data validate the intermediate-data concept for tackling cycle skipping and demonstrate its effectiveness for the application to first arrivals.

scholarly journals Semiglobal viscoacoustic full-waveform inversion

Geophysics ◽  
2019 ◽  
Vol 84 (2) ◽  
pp. R271-R293 ◽  
Author(s):  
Nuno V. da Silva ◽  
Gang Yao ◽  
Michael Warner
Keyword(s):  
Physical Properties ◽  
Wave Velocity ◽  
Seismic Data ◽  
Waveform Inversion ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Intrinsic Attenuation ◽  
Full Waveform ◽  
P Wave Velocity

Full-waveform inversion deals with estimating physical properties of the earth’s subsurface by matching simulated to recorded seismic data. Intrinsic attenuation in the medium leads to the dispersion of propagating waves and the absorption of energy — media with this type of rheology are not perfectly elastic. Accounting for that effect is necessary to simulate wave propagation in realistic geologic media, leading to the need to estimate intrinsic attenuation from the seismic data. That increases the complexity of the constitutive laws leading to additional issues related to the ill-posed nature of the inverse problem. In particular, the joint estimation of several physical properties increases the null space of the parameter space, leading to a larger domain of ambiguity and increasing the number of different models that can equally well explain the data. We have evaluated a method for the joint inversion of velocity and intrinsic attenuation using semiglobal inversion; this combines quantum particle-swarm optimization for the estimation of the intrinsic attenuation with nested gradient-descent iterations for the estimation of the P-wave velocity. This approach takes advantage of the fact that some physical properties, and in particular the intrinsic attenuation, can be represented using a reduced basis, substantially decreasing the dimension of the search space. We determine the feasibility of the method and its robustness to ambiguity with 2D synthetic examples. The 3D inversion of a field data set for a geologic medium with transversely isotropic anisotropy in velocity indicates the feasibility of the method for inverting large-scale real seismic data and improving the data fitting. The principal benefits of the semiglobal multiparameter inversion are the recovery of the intrinsic attenuation from the data and the recovery of the true undispersed infinite-frequency P-wave velocity, while mitigating ambiguity between the estimated parameters.

Application of multiparameter full-waveform inversion in Central Luconia Basin, Sarawak

2016 ◽  
Vol 4 (4) ◽  
pp. SU17-SU24 ◽  
Author(s):  
Vanessa Goh ◽  
Kjetil Halleland ◽  
René-Édouard Plessix ◽  
Alexandre Stopin
Keyword(s):  
Model Building ◽  
Waveform Inversion ◽  
Velocity Model ◽  
Thin Layers ◽  
Earth Model ◽  
Full Waveform Inversion ◽  
Data Set ◽  
Full Waveform ◽  
Velocity Variations ◽  
Central Luconia

Reducing velocity inaccuracy in complex settings is of paramount importance for limiting structural uncertainties, therefore helping the geologic interpretation and reservoir characterization. Shallow velocity variations due, for instance, to gas accumulations or carbonate reefs, are a common issue offshore Malaysia. These velocity variations are difficult to image through standard reflection-based velocity model building. We have applied full-waveform inversion (FWI) to better characterize the upper part of the earth model for a shallow-water field, located in the Central Luconia Basin offshore Sarawak. We have inverted a narrow-azimuth data set with a maximum inline offset of 4.4 km. Thanks to dedicated broadband preprocessing of the data set, we could enhance the signal-to-noise ratio in the 2.5–10 Hz frequency band. We then applied a multiparameter FWI to estimate the background normal moveout velocity and the [Formula: see text]-parameter. Full-waveform inversion together with broadband data processing has helped to better define the faults and resolve the thin layers in the shallow clastic section. The improvements in the velocity model brought by FWI lead to an improved image of the structural closure and flanks. Moreover, the increased velocity resolution helps in distinguishing between two different geologic interpretations.

Sign in / Sign up

Export Citation Format

Share Document