Integrative soil moisture monitoring in Switzerland for a better preparedness for projected drying trends

2021 ◽  
Author(s):  
Dominik Michel ◽  
Martin Hirschi ◽  
Sonia I. Seneviratne
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Real Time ◽  
Surface Soil ◽  
Microwave Remote Sensing ◽  
Data Availability ◽  
Climate Projections ◽  
Surface Soil Moisture ◽  
Soil Moisture Monitoring

<p>Climate projections indicate an increasing risk of dry and hot episodes in Central Europe, including in Switzerland. However, models display a large spread in projections of changes in summer drying, highlighting the importance of related observations to evaluate climate models and constrain projections. Land hydrological variables play an essential role for these projections. This is particularly the case for soil moisture and land evaporation, which are directly affecting the development of droughts and heatwaves in both present and future.</p><p>The recent 2020 spring as well as 2015 and 2018 summer droughts in Switzerland have highlighted the importance of monitoring and assessing changes of soil moisture and land evaporation, which are strongly related to drought impacts on agriculture, forestry, and ecosystems. The country was affected by major drought and heatwave conditions in 2015 and 2018. While the meteorological conditions started to recover at the end of the summer, the soil moisture conditions (and runoff) continued to be anomalously low for most of the fall. This illustrates the decoupling between meteorological drought and soil moisture drought conditions related to the intrinsic memory of the soil.</p><p>The only Switzerland-wide soil moisture monitoring programme currently in place is the SwissSMEX (Swiss Soil Moisture Experiment) measurement network. It was initiated in 2008 and comprises 19 soil moisture measurement profiles at 17 different sites (grassland, forest and arable land). Since 2017, seven grassland SwissSMEX sites were complemented with land evaporation measurements from mini-lysimeters.</p><p>First, a quality assessment and inter-comparison of the in-situ soil moisture and land evaporation observations at 12 grassland sites revealed substantial discrepancies between different sensor types in terms of absolute values and data availability. A standard procedure for processing and interpreting the SwissSMEX data is thus being established. Second, analyses have been carried out comparing the SwissSMEX measurements with gridded remote-sensing and reanalysis products that provide near real time soil moisture data. In particular, the European Space Agency (ESA) Climate Change Initiative (CCI) surface soil moisture product (ESA-CCI soil moisture) as well as the new ECMWF reanalysis ERA5 are considered. The seasonal evolution of the soil moisture anomalies (with respect to the long-term mean) show for 2020 two pronounced phases of dryness. These are consistently represented in SwissSMEX in-situ observations and ERA5. Also the other recent drought events of 2015 and 2018 show a similar temporal evolution in both datasets. The response of ESA-CCI surface soil moisture is less pronounced, more variable and also dependent on the measurement methodology, i.e., active or passive microwave remote sensing.</p><p>These first analyses provide useful insights in order to provide near-real time monitoring, enhance process understanding at the national scale and a better preparedness for future droughts.</p>

scholarly journals Estimating annual water storage variations in medium-scale (2000–10 000 km<sup>2</sup>) basins using microwave-based soil moisture retrievals

2017 ◽  
Vol 21 (3) ◽  
pp. 1849-1862 ◽  
Author(s):  
Wade T. Crow ◽  
Eunjin Han ◽  
Dongryeol Ryu ◽  
Christopher R. Hain ◽  
Martha C. Anderson
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Water Budget ◽  
Surface Soil ◽  
Water Storage ◽  
Microwave Remote Sensing ◽  
The United States ◽  
Surface Soil Moisture ◽  
Medium Scale ◽  
Annual Water

Abstract. Due to their shallow vertical support, remotely sensed surface soil moisture retrievals are commonly regarded as being of limited value for water budget applications requiring the characterization of temporal variations in total terrestrial water storage (dS ∕ dt). However, advances in our ability to estimate evapotranspiration remotely now allow for the direct evaluation of approaches for quantifying dS ∕ dt via water budget closure considerations. By applying an annual water budget analysis within a series of medium-scale (2000–10 000 km2) basins within the United States, we demonstrate that, despite their clear theoretical limitations, surface soil moisture retrievals derived from passive microwave remote sensing contain statistically significant information concerning dS ∕ dt. This suggests the possibility of using (relatively) higher-resolution microwave remote sensing products to enhance the spatial resolution of dS ∕ dt estimates acquired from gravity remote sensing.

scholarly journals An improved global remote-sensing-based surface soil moisture (RSSSM) dataset covering 2003–2018

2021 ◽  
Vol 13 (1) ◽  
pp. 1-31
Author(s):  
Yongzhe Chen ◽  
Xiaoming Feng ◽  
Bojie Fu
Keyword(s):  
Remote Sensing ◽  
Neural Networks ◽  
Soil Moisture ◽  
Data Fusion ◽  
Surface Soil ◽  
Microwave Remote Sensing ◽  
Satellite Monitoring ◽  
Surface Soil Moisture ◽  
Spatial Coverage

Abstract. Soil moisture is an important variable linking the atmosphere and terrestrial ecosystems. However, long-term satellite monitoring of surface soil moisture at the global scale needs improvement. In this study, we conducted data calibration and data fusion of 11 well-acknowledged microwave remote-sensing soil moisture products since 2003 through a neural network approach, with Soil Moisture Active Passive (SMAP) soil moisture data applied as the primary training target. The training efficiency was high (R2=0.95) due to the selection of nine quality impact factors of microwave soil moisture products and the complicated organizational structure of multiple neural networks (five rounds of iterative simulations, eight substeps, 67 independent neural networks, and more than 1 million localized subnetworks). Then, we developed the global remote-sensing-based surface soil moisture dataset (RSSSM) covering 2003–2018 at 0.1∘ resolution. The temporal resolution is approximately 10 d, meaning that three data records are obtained within a month, for days 1–10, 11–20, and from the 21st to the last day of that month. RSSSM is proven comparable to the in situ surface soil moisture measurements of the International Soil Moisture Network sites (overall R2 and RMSE values of 0.42 and 0.087 m3 m−3), while the overall R2 and RMSE values for the existing popular similar products are usually within the ranges of 0.31–0.41 and 0.095–0.142 m3 m−3), respectively. RSSSM generally presents advantages over other products in arid and relatively cold areas, which is probably because of the difficulty in simulating the impacts of thawing and transient precipitation on soil moisture, and during the growing seasons. Moreover, the persistent high quality during 2003–2018 as well as the complete spatial coverage ensure the applicability of RSSSM to studies on both the spatial and temporal patterns (e.g. long-term trend). RSSSM data suggest an increase in the global mean surface soil moisture. Moreover, without considering the deserts and rainforests, the surface soil moisture loss on consecutive rainless days is highest in summer over the low latitudes (30∘ S–30∘ N) but mostly in winter over the mid-latitudes (30–60∘ N, 30–60∘ S). Notably, the error propagation is well controlled with the extension of the simulation period to the past, indicating that the data fusion algorithm proposed here will be more meaningful in the future when more advanced microwave sensors become operational. RSSSM data can be accessed at https://doi.org/10.1594/PANGAEA.912597 (Chen, 2020).

Microwave Observations of Soil Hydrology

1999 ◽  
Author(s):  
T. J. Jackson ◽  
E. T. Engman
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Surface Soil ◽  
Radiant Energy ◽  
Microwave Remote Sensing ◽  
Heat Fluxes ◽  
Soil Parameters ◽  
Soil Hydrology ◽  
Surface Soil Moisture ◽  
Spatially Distributed

The upper few centimeters of the soil are extremely important because they are the interface between soil science and land-atmosphere research and are also the region of the greatest amount of organic material and biological activity (Wei, 1995). Passive microwave remote sensing can provide a measurement of the surface soil moisture for a range of cover conditions within reasonable error bounds (Jackson and Schmugge, 1989). Since spatially distributed and multitemporal observations of surface soil moisture are rare, the use of these data in hydrology and other disciplines has not been fully explored or developed. The ability to observe soil moisture frequently over large regions could significantly improve our ability to predict runoff and to partition incoming radiant energy into latent and sensible heat fluxes at a variety of scales up to those used in global circulation models. Temporal observation of surface soil moisture may also provide the information needed to determine key soil parameters, such as saturated conductivity (Ahuja et al., 1993). These sensors provide a spatially integrated measurement that may aid in understanding the upscaling of essential soil parameters from point observations. Some specific issues in soil hydrology that could be addressed with remotely sensed observations as described above include (Wei, 1995): (1) criteria for soil mapping based on spatial and temporal variance structures of state variables, (2) identifying scales of observation, (3) determining soil physical properties within profiles based on surface observations, (4) quantifying correlation lengths of soil moisture in time and space relative to precipitation and evaporation, (5) examining the covariance structure between soil water properties and those associated with water and heat fluxes at the land-atmosphere boundary at various scales, and (6) determining if vertical and horizontal fluxes of energy and matter below the surface can be ascertained from surface soil moisture distributions. In this chapter, the basis of microwave remote sensing of soil moisture will be presented along with the advantages and disadvantages of different techniques. Currently available sensor systems will be described.

scholarly journals Modelling soil moisture at SMOS scale by use of a SVAT model over the Valencia Anchor Station

2010 ◽  
Vol 14 (5) ◽  
pp. 831-846 ◽  
Author(s):  
S. Juglea ◽  
Y. Kerr ◽  
A. Mialon ◽  
J.-P. Wigneron ◽  
E. Lopez-Baeza ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Surface Soil ◽  
Temporal Distribution ◽  
Sea Surface Salinity ◽  
Surface Soil Moisture ◽  
Surface Salinity ◽  
Anchor Station ◽  
Svat Model

Abstract. The main goal of the SMOS (Soil Moisture and Ocean Salinity) mission is to deliver global fields of surface soil moisture and sea surface salinity using L-band (1.4 GHz) radiometry. Within the context of the Science preparation for SMOS, the Valencia Anchor Station (VAS) experimental site, in Spain, was chosen to be one of the main test sites in Europe for Calibration/Validation (Cal/Val) activities. In this framework, the paper presents an approach consisting in accurately simulating a whole SMOS pixel by representing the spatial and temporal heterogeneity of the soil moisture fields over the wide VAS surface (50×50 km2). Ground and meteorological measurements over the area are used as the input of a Soil-Vegetation-Atmosphere-Transfer (SVAT) model, SURFEX (Externalized Surface) - module ISBA (Interactions between Soil-Biosphere-Atmosphere) to simulate the spatial and temporal distribution of surface soil moisture. The calibration as well as the validation of the ISBA model are performed using in situ soil moisture measurements. It is shown that a good consistency is reached when point comparisons between simulated and in situ soil moisture measurements are made. Actually, an important challenge in remote sensing approaches concerns product validation. In order to obtain an representative soil moisture mapping over the Valencia Anchor Station (50×50 km2 area), a spatialization method is applied. For verification, a comparison between the simulated spatialized soil moisture and remote sensing data from the Advanced Microwave Scanning Radiometer on Earth observing System (AMSR-E) and from the European Remote Sensing Satellites (ERS-SCAT) is performed. Despite the fact that AMSR-E surface soil moisture product is not reproducing accurately the absolute values, it provides trustworthy information on surface soil moisture temporal variability. However, during the vegetation growing season the signal is perturbed. By using the polarization ratio a better agreement is obtained. ERS-SCAT soil moisture products are also used to be compared with the simulated spatialized soil moisture. However, the lack of soil moisture data from the ERS-SCAT sensor over the area (45 observations for one year) prevented capturing the soil moisture variability.

scholarly journals The Indian COSMOS Network (ICON): Validating L-Band Remote Sensing and Modelled Soil Moisture Data Products

2021 ◽  
Vol 13 (3) ◽  
pp. 537
Author(s):  
Deepti B Upadhyaya ◽  
Jonathan Evans ◽  
Sekhar Muddu ◽  
Sat Kumar Tomer ◽  
Ahmad Al Bitar ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Water Resource Management ◽  
Surface Soil ◽  
Root Zone ◽  
Cosmic Ray ◽  
Surface Soil Moisture ◽  
Data Set ◽  
Scale Difference

Availability of global satellite based Soil Moisture (SM) data has promoted the emergence of many applications in climate studies, agricultural water resource management and hydrology. In this context, validation of the global data set is of substance. Remote sensing measurements which are representative of an area covering 100 m2 to tens of km2 rarely match with in situ SM measurements at point scale due to scale difference. In this paper we present the new Indian Cosmic Ray Network (ICON) and compare it’s data with remotely sensed SM at different depths. ICON is the first network in India of the kind. It is operational since 2016 and consist of seven sites equipped with the COSMOS instrument. This instrument is based on the Cosmic Ray Neutron Probe (CRNP) technique which uses non-invasive neutron counts as a measure of soil moisture. It provides in situ measurements over an area with a radius of 150–250 m. This intermediate scale soil moisture is of interest for the validation of satellite SM. We compare the COSMOS derived soil moisture to surface soil moisture (SSM) and root zone soil moisture (RZSM) derived from SMOS, SMAP and GLDAS_Noah. The comparison with surface soil moisture products yield that the SMAP_L4_SSM showed best performance over all the sites with correlation (R) values ranging from 0.76 to 0.90. RZSM on the other hand from all products showed lesser performances. RZSM for GLDAS and SMAP_L4 products show that the results are better for the top layer R = 0.75 to 0.89 and 0.75 to 0.90 respectively than the deeper layers R = 0.26 to 0.92 and 0.6 to 0.8 respectively in all sites in India. The ICON network will be a useful tool for the calibration and validation activities for future SM missions like the NASA-ISRO Synthetic Aperture Radar (NISAR).

scholarly journals Modelling soil moisture at SMOS scale by use of a SVAT model over the Valencia Anchor Station

2010 ◽  
Vol 7 (1) ◽  
pp. 649-686 ◽  
Author(s):  
S. Juglea ◽  
Y. Kerr ◽  
A. Mialon ◽  
J.-P. Wigneron ◽  
E. Lopez-Baeza ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Surface Soil ◽  
Remote Sensing Data ◽  
Sea Surface Salinity ◽  
Surface Soil Moisture ◽  
Surface Salinity ◽  
Anchor Station ◽  
Svat Model

Abstract. The main goal of the SMOS (Soil Moisture and Ocean Salinity) mission is to deliver global fields of surface soil moisture and sea surface salinity using L-band (1.4 GHz) radiometry. Within the context of the preparation for this mission over land, the Valencia Anchor Station experimental site, in Spain, was chosen to be one of the main test sites in Europe for the SMOS Calibration/Validation (Cal/Val) activities. Ground and meteorological measurements over the area are used as the input of a Soil-Vegetation-Atmosphere-Transfer (SVAT) model, SURFEX (Externalized Surface)-module ISBA (Interactions between Soil-Biosphere-Atmosphere) so as to simulate the surface soil moisture. The calibration as well as the validation of the ISBA model was made using in situ soil moisture measurements. It is shown that a good consistency was reached when point comparisons between simulated and in situ soil moisture measurements were made. In order to obtain an accurate soil moisture mapping over the Valencia Anchor Station (50×50 km2 area), a spatialization method has been applied. To validate the approach, a comparison with remote sensing data from the Advanced Microwave Scanning Radiometer on Earth observing System (AMSR-E) and from the European Remote Sensing Satellites (ERS-Scat) was performed. Despite the fact that AMSR-E surface soil moisture product is not reproducing accurately the absolute values, it provides trustworthy information on surface soil moisture temporal variability. However, during the vegetation growing season the signal is perturbed. By using the polarization ratio a better agreement is obtained. ERS-Scat soil moisture products were also used to be compared with the simulated spatialized soil moisture. The seasonal variations were well reproduced. However, the lack of soil moisture data over the area (45 observations for one year) was a limit into completely understanding the soil moisture variability.

Sign in / Sign up

Export Citation Format

Share Document