scholarly journals FUSION OF LIDAR AND HYPERSPECTRAL DATA FOR SEMANTIC SEGMENTATION OF FOREST TREE SPECIES

2020 ◽  
Vol XLIII-B3-2020 ◽  
pp. 487-494
Author(s):  
E. Tusa ◽  
J. M. Monnet ◽  
J. B. Barré ◽  
M. Dalla Mura ◽  
J. Chanussot
Keyword(s):  
Tree Species ◽  
Semantic Segmentation ◽  
Forest Tree ◽  
Feature Reduction ◽  
Lidar Data ◽  
Topographic Effects ◽  
Species Classification ◽  
Forest Tree Species ◽  
Tree Species Classification ◽  
Feature Descriptors

Abstract. Hyperspectral images (HI) and Light Detection and Ranging (LiDAR) provide high resolution radiometric and geometric information for monitoring forests at individual tree crown (ITC) level. It has many important applications for sustainable forest management, biodiversity assessment and healthy ecosystem preservation. However, the integration of different remote sensing modalities is a challenging task for tree species classification due to different artifacts such as the lighting variability, the topographic effects and the atmospheric conditions of the data acquisition. The characterization of ITC can benefit from the extraction and selection of robust feature descriptors that solve these issues. This paper aims to investigate the integration of feature descriptors from HI and LiDAR by using the intra-set and inter-set feature importance for the semantic segmentation of forest tree species. A fusion methodology is proposed between high-density LiDAR data – (20 pulses m−2) and VNIR HI – (160 bands and 0.80 m spatial resolution) acquired on French temperate forests along an altitude gradient. The proposed scheme has three inputs: the field inventory information, the HI and the LiDAR data. Our approach can be described in nine stages: polygon projection, non-overlapping pixel selection, vegetation and shadow removal, LiDAR feature extraction, height mask, robust PCA (rPCA), feature reduction and classification. The overall accuracy of tree species classification at pixel-level was 68.9% by using random forest (RF) classifier. Our approach showed that 74.0% of trees were correctly assigned overall, by having conifer species such as Norway Spruce (Picea abies) with a producer’s accuracy of 97.4%.

scholarly journals The Effect of Topographic Correction on Forest Tree Species Classification Accuracy

2020 ◽  
Vol 12 (5) ◽  
pp. 787
Author(s):  
Chao Dong ◽  
Gengxing Zhao ◽  
Yan Meng ◽  
Baihong Li ◽  
Bo Peng
Keyword(s):  
Remote Sensing ◽  
Tree Species ◽  
Forest Tree ◽  
Species Classification ◽  
Illumination Condition ◽  
Topographic Correction ◽  
Forest Tree Species ◽  
Tree Species Classification ◽  
Inconsistency Rate ◽  
Rotation Model

Topographic correction can reduce the influences of topographic factors and improve the accuracy of forest tree species classification when using remote-sensing data to investigate forest resources. In this study, the Mount Taishan forest farm is the research area. Based on Landsat 8 OLI data and field survey subcompartment data, four topographic correction models (cosine model, C model, solar-canopy-sensor (SCS)+C model and empirical rotation model) were used on the Google Earth Engine (GEE) platform to carry out algorithmic data correction. Then, the tree species in the study area were classified by the random forest method. Combined with the tree species classification process, the topographic correction effects were analyzed, and the effects, advantages and disadvantages of each correction model were evaluated. The results showed that the SCS+C model and empirical rotation model were the best models in terms of visual effect, reducing the band standard deviation and adjusting the reflectance distribution. When we used the SCS+C model to correct the remote-sensing image, the total accuracy increased by 4% when using the full-coverage training areas to classify tree species and by nearly 13% when using the shadowless training area. In the illumination condition interval of 0.4–0.6, the inconsistency rate decreased significantly; however, the inconsistency rate increased with increasing illumination condition values. Topographic correction can enhance reflectance information in shaded areas and can significantly improve the image quality. Topographic correction can be used as a pretreatment method for forest species classification when the study area’s dominant tree species are in a low light intensity area.

scholarly journals FOREST TREE SPECIES DISTRIBUTION MAPPING USING LANDSAT SATELLITE IMAGERY AND TOPOGRAPHIC VARIABLES WITH THE MAXIMUM ENTROPY METHOD IN MONGOLIA

2016 ◽  
Vol XLI-B8 ◽  
pp. 593-596 ◽  
Author(s):  
Shou Hao Chiang ◽  
Miguel Valdez ◽  
Chi-Farn Chen
Keyword(s):  
Maximum Entropy ◽  
Satellite Imagery ◽  
Tree Species ◽  
Maximum Entropy Method ◽  
Forest Tree ◽  
Entropy Method ◽  
Surface Reflectance ◽  
Species Classification ◽  
Forest Tree Species ◽  
Tree Species Classification

Forest is a very important ecosystem and natural resource for living things. Based on forest inventories, government is able to make decisions to converse, improve and manage forests in a sustainable way. Field work for forestry investigation is difficult and time consuming, because it needs intensive physical labor and the costs are high, especially surveying in remote mountainous regions. A reliable forest inventory can give us a more accurate and timely information to develop new and efficient approaches of forest management. The remote sensing technology has been recently used for forest investigation at a large scale. To produce an informative forest inventory, forest attributes, including tree species are unavoidably required to be considered. <br><br> In this study the aim is to classify forest tree species in Erdenebulgan County, Huwsgul province in Mongolia, using Maximum Entropy method. The study area is covered by a dense forest which is almost 70% of total territorial extension of Erdenebulgan County and is located in a high mountain region in northern Mongolia. For this study, Landsat satellite imagery and a Digital Elevation Model (DEM) were acquired to perform tree species mapping. The forest tree species inventory map was collected from the Forest Division of the Mongolian Ministry of Nature and Environment as training data and also used as ground truth to perform the accuracy assessment of the tree species classification. Landsat images and DEM were processed for maximum entropy modeling, and this study applied the model with two experiments. The first one is to use Landsat surface reflectance for tree species classification; and the second experiment incorporates terrain variables in addition to the Landsat surface reflectance to perform the tree species classification. All experimental results were compared with the tree species inventory to assess the classification accuracy. Results show that the second one which uses Landsat surface reflectance coupled with terrain variables produced better result, with the higher overall accuracy and kappa coefficient than first experiment. The results indicate that the Maximum Entropy method is an applicable, and to classify tree species using satellite imagery data coupled with terrain information can improve the classification of tree species in the study area.

scholarly journals FOREST TREE SPECIES DISTRIBUTION MAPPING USING LANDSAT SATELLITE IMAGERY AND TOPOGRAPHIC VARIABLES WITH THE MAXIMUM ENTROPY METHOD IN MONGOLIA

2016 ◽  
Vol XLI-B8 ◽  
pp. 593-596 ◽  
Author(s):  
Shou Hao Chiang ◽  
Miguel Valdez ◽  
Chi-Farn Chen
Keyword(s):  
Maximum Entropy ◽  
Satellite Imagery ◽  
Tree Species ◽  
Maximum Entropy Method ◽  
Forest Tree ◽  
Entropy Method ◽  
Surface Reflectance ◽  
Species Classification ◽  
Forest Tree Species ◽  
Tree Species Classification

Forest is a very important ecosystem and natural resource for living things. Based on forest inventories, government is able to make decisions to converse, improve and manage forests in a sustainable way. Field work for forestry investigation is difficult and time consuming, because it needs intensive physical labor and the costs are high, especially surveying in remote mountainous regions. A reliable forest inventory can give us a more accurate and timely information to develop new and efficient approaches of forest management. The remote sensing technology has been recently used for forest investigation at a large scale. To produce an informative forest inventory, forest attributes, including tree species are unavoidably required to be considered. &lt;br&gt;&lt;br&gt; In this study the aim is to classify forest tree species in Erdenebulgan County, Huwsgul province in Mongolia, using Maximum Entropy method. The study area is covered by a dense forest which is almost 70% of total territorial extension of Erdenebulgan County and is located in a high mountain region in northern Mongolia. For this study, Landsat satellite imagery and a Digital Elevation Model (DEM) were acquired to perform tree species mapping. The forest tree species inventory map was collected from the Forest Division of the Mongolian Ministry of Nature and Environment as training data and also used as ground truth to perform the accuracy assessment of the tree species classification. Landsat images and DEM were processed for maximum entropy modeling, and this study applied the model with two experiments. The first one is to use Landsat surface reflectance for tree species classification; and the second experiment incorporates terrain variables in addition to the Landsat surface reflectance to perform the tree species classification. All experimental results were compared with the tree species inventory to assess the classification accuracy. Results show that the second one which uses Landsat surface reflectance coupled with terrain variables produced better result, with the higher overall accuracy and kappa coefficient than first experiment. The results indicate that the Maximum Entropy method is an applicable, and to classify tree species using satellite imagery data coupled with terrain information can improve the classification of tree species in the study area.

scholarly journals A Weighted SVM-Based Approach to Tree Species Classification at Individual Tree Crown Level Using LiDAR Data

2019 ◽  
Vol 11 (24) ◽  
pp. 2948 ◽  
Author(s):  
Hoang Minh Nguyen ◽  
Begüm Demir ◽  
Michele Dalponte
Keyword(s):  
Tree Species ◽  
Remote Sensing Data ◽  
Classification Problem ◽  
Learning Phase ◽  
Support Vector ◽  
Lidar Data ◽  
Species Classification ◽  
Individual Tree ◽  
Tree Species Classification ◽  
Training Samples

Tree species classification at individual tree crowns (ITCs) level, using remote-sensing data, requires the availability of a sufficient number of reliable reference samples (i.e., training samples) to be used in the learning phase of the classifier. The classification performance of the tree species is mainly affected by two main issues: (i) an imbalanced distribution of the tree species classes, and (ii) the presence of unreliable samples due to field collection errors, coordinate misalignments, and ITCs delineation errors. To address these problems, in this paper, we present a weighted Support Vector Machine (wSVM)-based approach for the detection of tree species at ITC level. The proposed approach initially extracts (i) different weights associated to different classes of tree species, to mitigate the effect of the imbalanced distribution of the classes; and (ii) different weights associated to different training samples according to their importance for the classification problem, to reduce the effect of unreliable samples. Then, in order to exploit different weights in the learning phase of the classifier a wSVM algorithm is used. The features to characterize the tree species at ITC level are extracted from both the elevation and intensity of airborne light detection and ranging (LiDAR) data. Experimental results obtained on two study areas located in the Italian Alps show the effectiveness of the proposed approach.

Sign in / Sign up

Export Citation Format

Share Document