DESIGN OF A FEEDING STATION IN ECOLOGICAL TRANSPORTATION SYSTEM OF RAW MATERIALS

Dicalcium silicate (Ca2SiO4) is a major component of Portland cement. It has also been investigated as a potential transformation toughener alternative to zirconia. It has five polymorphs: α, α'H, α'L, β and γ. Of interest is the β-to-γ transformation on cooling at about 490°C. This transformation, accompanied by a 12% volume increase and a 4.6° unit cell shape change, is analogous to the tetragonal-to-monoclinic transformation in zirconia. Due to the processing methods used, previous studies into the particle size effect were limited by a wide range of particle size distribution. In an attempt to obtain a more uniform size, a fast quench rate involving a laser-melting/roller-quenching technique was investigated.The laser-melting/roller-quenching experiment used precompacted bars of stoichiometric γ-Ca2SiO4 powder, which were synthesized from AR grade CaCO3 and SiO2xH2O. The raw materials were mixed by conventional ceramic processing techniques, and sintered at 1450°C. The dusted γ-Ca2SiO4 powder was uniaxially pressed into 0.4 cm x 0.4 cm x 4 cm bars under 34 MPa and cold isostatically pressed under 172 MPa. The γ-Ca2SiO4 bars were melted by a 10 KW-CO2 laser.

Download Full-text

Crystallization of barium hexaferrite

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100122216 ◽

1992 ◽

Vol 50 (1) ◽

pp. 362-363

Author(s):

Chung-kook Lee ◽

Yolande Berta ◽

Robert F. Speyer

Keyword(s):

Size Distribution ◽

Raw Materials ◽

Barium Hexaferrite ◽

Recording Media ◽

Magnetic Recording Media ◽

Promising Candidate ◽

Crystallization Method ◽

Temperature Heat ◽

High Density Magnetic Recording ◽

Temperature Heat Treatment

Barium hexaferrite (BaFe12O19) is a promising candidate for high density magnetic recording media due to its superior magnetic properties. For particulate recording media, nano-sized single crystalline powders with a narrow size distribution are a primary application requirement. The glass-crystallization method is preferred because of the controllability of crystallization kinetics, hence, particle size and size distribution. A disadvantage of this method is the need to melt raw materials at high temperatures with non-reactive crucibles, e.g. platinum. However, in this work, we have shown that crystal growth of barium hexaferrite occurred during low temperature heat treatment of raw batches.

Download Full-text