Investigation of the efficiency of restrained oil displacement using of enhancing oil recovery methods

Author(s):  
A.V. Uhrynovskyi

ver

Author(s):  
Vadim Iu. Ogoreltcev ◽  
◽  
Sergei A. Leontev ◽  
Valentin A. Korotenko ◽  
Sergei I. Grachev ◽  
...  

In development of hard-to-recover hydrocarbon reserves, enhanced oil recovery methods are applied on a massive scale, chemical methods being the most common ones. Each formation stimulation technology is associated with certain application conditions which depend on the initial geological and physical formation parameters and current state of its development. Methodological approach is provided for determination of permeability coefficient and coefficient of oil displacement from rock during testing of compositions of technologies of physical and chemical enhanced oil recovery methods on the basis of laboratory studies of rheological properties of various brands of acrylamide polymer. The methods have been developed according to the requirements to core analysis. The study provides a list of equipment and basic characteristics of the filtration system, as well as the procedure for preparation of working fluids and laboratory formation to laboratory study. Laboratory study of gel systems’ rheological properties is performed on the basis of the technological process for preparation of components of viscoelastic compound recipe at the wellhead and its further injection into the formation. To this end, in order to determine the rheological properties of gel systems, a special-purpose rheometer was used, with a capability to dynamically register the changing viscosity data of the tested polymer systems prepared on the analogues of fresh, produced and Cenomanian waters in “well – formation” thermobaric conditions. Based on the laboratory studies, it has been shown that trial injections of cross-linked compositions on the basis of polyacrylamide (PAA) of brands FP-107 and Ро1у-Т-101, possessing the capability of multifold increase of final viscosity of the polymer composition (by 2–3 times and more) in conditions of increasing temperature in low salinity waters (produced, Cenomanian), enable higher technological effectiveness compared to brand FP-307 polyacrylamide presently used in the company’s oilfields.


Author(s):  
A. A. Kazakov ◽  
V. V. Chelepov ◽  
R. G. Ramazanov

The features of evaluation of the effectiveness of flow deflection technologies of enhanced oil recovery methods. It is shown that the effect of zeroing component intensification of fluid withdrawal leads to an overestimation of the effect of flow deflection technology (PRP). Used in oil companies practice PRP efficiency calculation, which consists in calculating the effect on each production well responsive to subsequent summation effects, leads to the selective taking into account only the positive components of PRP effect. Negative constituents — not taken into account and it brings overestimate over to overstating of efficiency. On actual examples the groundless overstating and understating of efficiency is shown overestimate at calculations on applied in petroleum companies by a calculation.


2021 ◽  
Vol 7 ◽  
pp. 960-967
Author(s):  
Mohammad Hossein Ahmadi ◽  
S.M. Alizadeh ◽  
Dmitry Tananykhin ◽  
Saba Karbalaei Hadi ◽  
Pavel Iliushin ◽  
...  

RSC Advances ◽  
2017 ◽  
Vol 7 (14) ◽  
pp. 8118-8130 ◽  
Author(s):  
Hongbin Yang ◽  
Wanli Kang ◽  
Hairong Wu ◽  
Yang Yu ◽  
Zhou Zhu ◽  
...  

The dispersed low-elastic microsphere system shows shear-thickening behavior because of the microstructure change and the interaction of internal forces.


1984 ◽  
Vol 24 (06) ◽  
pp. 606-616 ◽  
Author(s):  
Charles P. Thomas ◽  
Paul D. Fleming ◽  
William K. Winter

Abstract A mathematical model describing one-dimensional (1D), isothermal flow of a ternary, two-phase surfactant system in isotropic porous media is presented along with numerical solutions of special cases. These solutions exhibit oil recovery profiles similar to those observed in laboratory tests of oil displacement by surfactant systems in cores. The model includes the effects of surfactant transfer between aqueous and hydrocarbon phases and both reversible and irreversible surfactant adsorption by the porous medium. The effects of capillary pressure and diffusion are ignored, however. The model is based on relative permeability concepts and employs a family of relative permeability curves that incorporate the effects of surfactant concentration on interfacial tension (IFT), the viscosity of the phases, and the volumetric flow rate. A numerical procedure was developed that results in two finite difference equations that are accurate to second order in the timestep size and first order in the spacestep size and allows explicit calculation of phase saturations and surfactant concentrations as a function of space and time variables. Numerical dispersion (truncation error) present in the two equations tends to mimic the neglected present in the two equations tends to mimic the neglected effects of capillary pressure and diffusion. The effective diffusion constants associated with this effect are proportional to the spacestep size. proportional to the spacestep size. Introduction In a previous paper we presented a system of differential equations that can be used to model oil recovery by chemical flooding. The general system allows for an arbitrary number of components as well as an arbitrary number of phases in an isothermal system. For a binary, two-phase system, the equations reduced to those of the Buckley-Leverett theory under the usual assumptions of incompressibility and each phase containing only a single component, as well as in the more general case where both phases have significant concentrations of both components, but the phases are incompressible and the concentration in one phase is a very weak function of the pressure of the other phase at a given temperature. pressure of the other phase at a given temperature. For a ternary, two-phase system a set of three differential equations was obtained. These equations are applicable to chemical flooding with surfactant, polymer, etc. In this paper, we present a numerical solution to these equations paper, we present a numerical solution to these equations for I D flow in the absence of gravity. Our purpose is to develop a model that includes the physical phenomena influencing oil displacement by surfactant systems and bridges the gap between laboratory displacement tests and reservoir simulation. It also should be of value in defining experiments to elucidate the mechanisms involved in oil displacement by surfactant systems and ultimately reduce the number of experiments necessary to optimize a given surfactant system.


Author(s):  
A.N. Ivanov ◽  
◽  
M.M. Veliev ◽  
I.V. Vladimirov ◽  
E.A. Udalova ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document