Transport and Mixing in Liquid Phase Using Large Eddy Simulation: A Review

AbstractA computational investigation of three configurations of the Delft Spray in Hot-diluted Co-flow (DSHC) is presented. The selected burner comprises a hollow cone pressure swirl atomiser, injecting an ethanol spray, located in the centre of a hot co-flow generator, with the conditions studied corresponding to Moderate or Intense Low-oxygen Dilution (MILD) combustion. The simulations are performed in the context of Large Eddy Simulation (LES) in combination with a transport equation for the joint probability density function (pdf) of the scalars, solved using the Eulerian stochastic field method. The liquid phase is simulated by the use of a Lagrangian point particle approach, where the sub-grid-scale interactions are modelled with a stochastic approach. Droplet breakup is represented by a simple primary breakup model in combination with a stochastic secondary breakup formulation. The approach requires only a minimal knowledge of the fuel injector and avoids the need to specify droplet size and velocity distributions at the injection point. The method produces satisfactory agreement with the experimental data and the velocity fields of the gas and liquid phase both averaged and ‘size-class by size-class’ are well depicted. Two widely accepted evaporation models, utilising a phase equilibrium assumption, are used to investigate the influence of evaporation on the evolution of the liquid phase and the effects on the flame. An analysis on the dynamics of stabilisation sheds light on the importance of droplet size in the three spray flames; different size droplets play different roles in the stabilisation of the flames.

Download Full-text

Large-eddy simulation of particle-laden turbulent flows

Journal of Fluid Mechanics ◽

10.1017/s0022112008003443 ◽

2008 ◽

Vol 614 ◽

pp. 207-252 ◽

Cited By ~ 98

Author(s):

M. BINI ◽

W. P. JONES

Keyword(s):

Liquid Phase ◽

Large Eddy Simulation ◽

Turbulent Flows ◽

Large Scale ◽

Isotropic Turbulence ◽

Probabilistic Approach ◽

Turbulent Shear ◽

Turbulent Shear Flow ◽

Eddy Simulation ◽

Large Eddy

A large-eddy-based methodology for the simulation of turbulent sprays is discussed. The transport equations for the spatially filtered gas phase variables, in which source terms accounting for the droplet effects are added, are solved together with a probabilistic description of the liquid phase. The probabilistic approach for the liquid phase is based on the transport equation for the spatially filtered joint probability density function of the variables required in order to describe the state of the liquid phase. In this equation, unclosed terms representing the filtered Lagrangian rates of change of the variables describing the spray are present. General modelling ideas for subgrid-scale (SGS) effects are proposed. The capabilities of the approach and the validity of the closure models, with particular with respect to the SGS dispersion, are investigated through application to a dilute particle-laden turbulent mixing layer. It is demonstrated that the formulation is able to reproduce very closely the measured properties of both the continuous and dispersed phases. The large-eddy simulation (LES) results are also found to be entirely consistent with the experimentally observed characteristics of droplet–gas turbulence interactions. Consistent with direct numerical simulation (DNS) studies of isotropic turbulence laden with particles where the entire turbulence spectrum is found to be modulated by the presence of particles, the present investigation, which comprises the effects of particle transport upon the large-scale vortical structures of a turbulent shear flow, highlights what appears to be a selective behaviour; few large-scale frequencies gain energy whereas the remaining modes are damped.

Download Full-text