scholarly journals Double-Sided Passivated Contacts for Solar Cell Applications: An Industrially Viable Approach Toward 24% Efficient Large Area Silicon Solar Cells

Author(s):  
Zhi Peng Ling ◽  
Zheng Xin ◽  
Puqun Wang ◽  
Ranjani Sridharan ◽  
Cangming Ke ◽  
...  
2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Zengchao Zhao ◽  
Bingye Zhang ◽  
Ping Li ◽  
Wan Guo ◽  
Aimin Liu

The performance of black silicon solar cells with various passivation films was characterized. Large area (156×156 mm2) black silicon was prepared by silver-nanoparticle-assisted etching on pyramidal silicon wafer. The conversion efficiency of black silicon solar cell without passivation is 13.8%. For the SiO2andSiNx:H passivation, the conversion efficiency of black silicon solar cells increases to 16.1% and 16.5%, respectively. Compared to the single film of surface passivation of black silicon solar cells, the SiO2/SiNx:H stacks exhibit the highest efficiency of 17.1%. The investigation of internal quantum efficiency (IQE) suggests that the SiO2/SiNx:H stacks films decrease the Auger recombination through reducing the surface doping concentration and surface state density of the Si/SiO2interface, andSiNx:H layer suppresses the Shockley-Read-Hall (SRH) recombination in the black silicon solar cell, which yields the best electrical performance of b-Si solar cells.


2007 ◽  
Vol 2007 ◽  
pp. 1-5 ◽  
Author(s):  
U. Gangopadhyay ◽  
K. Kim ◽  
S. K. Dhungel ◽  
H. Saha ◽  
J. Yi

The low-cost chemical bath deposition (CBD) technique is used to prepare CBD-ZnS films as antireflective (AR) coating for multicrystalline silicon solar cells. The uniformity of CBD-ZnS film on large area of textured multicrystalline silicon surface is the major challenge of CBD technique. In the present work, attempts have been made for the first time to improve the rate of deposition and uniformity of deposited film by controlling film stoichiometry and refractive index and also to minimize reflection loss by proper optimization of molar percentage of different chemical constituents and deposition conditions. Reasonable values of film deposition rate (12.13 Å′/min.), good film uniformity (standard deviation <1), and refractive index (2.35) along with a low percentage of average reflection (6-7%) on a textured mc-Si surface are achieved with proper optimization of ZnS bath. 12.24% efficiency on large area (125 mm × 125 mm) multicrystalline silicon solar cells with CBD-ZnS antireflection coating has been successfully fabricated. The viability of low-cost CBD-ZnS antireflection coating on large area multicrystalline silicon solar cell in the industrial production level is emphasized.


2020 ◽  
Vol 49 (15) ◽  
pp. 4725-4731
Author(s):  
Daqing Yang ◽  
Haiduo Liang ◽  
Yujie Liu ◽  
Man Hou ◽  
Liping Kan ◽  
...  

We present a large-area luminescent down-shifting layer consists of polyvinyl alcohol embedding a newly synthesized ternary Eu3+ complex. C-Si solar cell coated with this layer displayed an enhancement of ~15% in external quantum efficiency.


2006 ◽  
Vol 90 (20) ◽  
pp. 3557-3567 ◽  
Author(s):  
U. Gangopadhyay ◽  
K.H. Kim ◽  
S.K. Dhungel ◽  
U. Manna ◽  
P.K. Basu ◽  
...  

2011 ◽  
Vol 8 ◽  
pp. 487-492 ◽  
Author(s):  
F. Book ◽  
T. Wiedenmann ◽  
G. Schubert ◽  
H. Plagwitz ◽  
G. Hahn

2003 ◽  
Vol 42 (Part 2, No. 11A) ◽  
pp. L1312-L1314 ◽  
Author(s):  
Akihiro Takano ◽  
Masayuki Tanda ◽  
Makoto Shimosawa ◽  
Takehito Wada ◽  
Tomoyoshi Kamoshita

We know the mechanical properties of silicon. However, little is known about the mechanical properties of silicon solar cells. Modeling is widely used in the study of solar cells. This article discusses in detail the effect of mechanical stress on solar cells. To do this, a model of the solar cell was created and simulated at Comsol Multiphysics. The results were presented visually and graphically. The results were tested for relevance and accuracy


Sign in / Sign up

Export Citation Format

Share Document