scholarly journals Equivalent circuit model and microwave reflection loss mechanism of double-layer spiral-ring metasurface embedded composite microwave absorber

2019 ◽  
Vol 68 (9) ◽  
pp. 095201
Author(s):  
Yu-Han Li ◽  
Lian-Wen Deng ◽  
Heng Luo ◽  
Long-Hui He ◽  
Jun He ◽  
...  
2020 ◽  
Vol 10 (15) ◽  
pp. 5030
Author(s):  
Tao Gao ◽  
Feng Huang ◽  
Yanqing Chen ◽  
Weilin Zhu ◽  
Xuewei Ju ◽  
...  

Cascading similar frequency selective surfaces (FSSs) improves the roll-off rate and frequency selectivity of THz bandpass filters. However, resonant coupling between FSS layers causes anomalous transmission peaks. In this work, we have employed an equivalent circuit model to analyze a double-layer FSS structure with periodic cross apertures at different interlayer spacing. We found that the anomalous peaks can be attributed to the resonant coupling between the upper and lower layer FSSs, and their periodic appearance with changing interlayer spacing is related to the half-wavelength repeatability of the circuit. We have fabricated a double-layer FSS sample using femtosecond laser micromachining and measured it using time-domain THz spectroscopy. The results using the equivalent circuit model agree with the Finite-Difference Time-Domain (FDTD) and experimental results.


2012 ◽  
Vol 132 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Satoshi Maruyama ◽  
Muneki Nakada ◽  
Makoto Mita ◽  
Takuya Takahashi ◽  
Hiroyuki Fujita ◽  
...  

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1644
Author(s):  
Qian Zhang ◽  
Huijuan Liu ◽  
Tengfei Song ◽  
Zhenyang Zhang

A novel, improved equivalent circuit model of double-sided linear induction motors (DLIMs) is proposed, which takes the skin effect and the nonzero leakage reactance of the secondary, longitudinal, and transverse end effects into consideration. Firstly, the traditional equivalent circuit with longitudinal and transverse end effects are briefly reviewed. Additionally, the correction coefficients for longitudinal and transverse end effects derived by one-dimensional analysis models are given. Secondly, correction factors for skin effect, which reflects the inhomogeneous air gap magnetic field vertically, and the secondary leakage reactance are derived by the quasi-two-dimensional analysis model. Then, the proposed equivalent circuit is presented, and the excitation reactance and secondary resistance are modified by the correction coefficients derived from the three analytical models. Finally, a three-dimensional (3D) finite element model is used to verify the proposed equivalent circuit model under varying air gap width and frequency, and the results are also compared with that of the traditional equivalent circuit models. The calculated thrust characteristics by the proposed equivalent circuit and 3D finite element model are experimentally validated under a constant voltage–frequency drive.


Sign in / Sign up

Export Citation Format

Share Document