scholarly journals Structured illumination with particle averaging reveals novel roles for yeast centrosome components during duplication

eLife ◽  
2015 ◽  
Vol 4 ◽  
Author(s):  
Shannon Burns ◽  
Jennifer S Avena ◽  
Jay R Unruh ◽  
Zulin Yu ◽  
Sarah E Smith ◽  
...  
Keyword(s):  
Fluorescent Protein ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Exit ◽  
Membrane Insertion ◽  
Structured Illumination ◽  
Wild Type ◽  
Structured Illumination Microscopy ◽  
Pole Body ◽  
Intensity Information

Duplication of the yeast centrosome (called the spindle pole body, SPB) is thought to occur through a series of discrete steps that culminate in insertion of the new SPB into the nuclear envelope (NE). To better understand this process, we developed a novel two-color structured illumination microscopy with single-particle averaging (SPA-SIM) approach to study the localization of all 18 SPB components during duplication using endogenously expressed fluorescent protein derivatives. The increased resolution and quantitative intensity information obtained using this method allowed us to demonstrate that SPB duplication begins by formation of an asymmetric Sfi1 filament at mitotic exit followed by Mps1-dependent assembly of a Spc29- and Spc42-dependent complex at its tip. Our observation that proteins involved in membrane insertion, such as Mps2, Bbp1, and Ndc1, also accumulate at the new SPB early in duplication suggests that SPB assembly and NE insertion are coupled events during SPB formation in wild-type cells.

scholarly journals Mutant Membrane Protein of the Budding Yeast Spindle Pole Body Is Targeted to the Endoplasmic Reticulum Degradation Pathway

Genetics ◽  
2002 ◽  
Vol 162 (2) ◽  
pp. 567-578 ◽  
Author(s):  
Susan McBratney ◽  
Mark Winey
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Degradation Pathway ◽  
Spindle Pole ◽  
Wild Type ◽  
Er Quality Control ◽  
Pole Body ◽  
Cytoplasmic Face ◽  
Ubiquitin Conjugating Enzyme ◽  
Ubiquitin Conjugation

Abstract Mutation of either the yeast MPS2 or the NDC1 gene leads to identical spindle pole body (SPB) duplication defects: The newly formed SPB is improperly inserted into the nuclear envelope (NE), preventing the cell from forming a bipolar mitotic spindle. We have previously shown that both MPS2 and NDC1 encode integral membrane proteins localized at the SPB. Here we show that CUE1, previously known to have a role in coupling ubiquitin conjugation to ER degradation, is an unusual dosage suppressor of mutations in MPS2 and NDC1. Cue1p has been shown to recruit the soluble ubiquitin-conjugating enzyme, Ubc7p, to the cytoplasmic face of the ER membrane where it can ubiquitinate its substrates and target them for degradation by the proteasome. Both mps2-1 and ndc1-1 are also suppressed by disruption of UBC7 or its partner, UBC6. The Mps2-1p mutant protein level is markedly reduced compared to wild-type Mps2p, and deletion of CUE1 restores the level of Mps2-1p to nearly wild-type levels. Our data indicate that Mps2p may be targeted for degradation by the ER quality control pathway.

scholarly journals Redistribution of centrosomal proteins by centromeres and Polo kinase controls nuclear envelope breakdown

2020 ◽  
Author(s):  
Andrew J. Bestul ◽  
Zulin Yu ◽  
Jay R. Unruh ◽  
Sue L. Jaspersen
Keyword(s):  
Nuclear Envelope ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Ring Structure ◽  
Yeast Cells ◽  
Structured Illumination ◽  
Structured Illumination Microscopy ◽  
Spindle Formation ◽  
Nuclear Envelope Breakdown ◽  
Polo Kinase

AbstractProper mitotic progression in Schizosaccharomyces pombe requires partial nuclear envelope breakdown (NEBD) and insertion of the spindle pole body (SPB – yeast centrosome) to build the mitotic spindle. Linkage of the centromere to the SPB is vital to this process, but why that linkage is important is not well understood. Utilizing high-resolution structured illumination microscopy (SIM), we show that the conserved SUNprotein Sad1 and other SPB proteins redistribute during mitosis to form a ring complex around SPBs, which is a precursor for NEBD and spindle formation. Although the Polo kinase Plo1 is not necessary for Sad1 redistribution, it localizes to the SPB region connected to the centromere, and its activity is vital for SPB ring protein redistribution and for complete NEBD to allow for SPB insertion. Our results lead to a model in which centromere linkage to the SPB drives redistribution of Sad1 and Plo1 activation that in turn facilitate NEBD and spindle formation through building of an SPB ring structure.SummaryNuclear envelope breakdown is necessary for fission yeast cells to go through mitosis. Bestul et al. show that the SUN protein, Sad1, is vital in carrying out this breakdown and is regulated by the centromere and Polo kinase.

scholarly journals Bim1p/Yeb1p Mediates the Kar9p-dependent Cortical Attachment of Cytoplasmic Microtubules

2000 ◽  
Vol 11 (9) ◽  
pp. 2949-2959 ◽  
Author(s):  
Rita K. Miller ◽  
Soo-Chen Cheng ◽  
Mark D. Rose
Keyword(s):  
Fluorescent Protein ◽  
Binding Protein ◽  
Spindle Pole Body ◽  
Attachment Site ◽  
Spindle Pole ◽  
Cell Cortex ◽  
Microtubule Binding ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Two Hybrid

In Saccharomyces cerevisiae, positioning of the mitotic spindle depends on the interaction of cytoplasmic microtubules with the cell cortex. In this process, cortical Kar9p in the bud acts as a link between the actin and microtubule cytoskeletons. To identify Kar9p-interacting proteins, a two-hybrid screen was conducted with the use of full-length Kar9p as bait, and three genes were identified: BIM1, STU2, andKAR9 itself. STU2 encodes a component of the spindle pole body. Bim1p is the yeast homologue of the human microtubule-binding protein EB1, which is a binding partner to the adenomatous polyposis coli protein involved in colon cancer. Eighty-nine amino acids within the third quarter of Bim1p was sufficient to confer interaction with Kar9p. The two-hybrid interactions were confirmed with the use of coimmunoprecipitation experiments. Genetic analysis placed Bim1p in the Kar9p pathway for nuclear migration. Bim1p was not required for Kar9p's cortical or spindle pole body localization. However, deletion ofBIM1 eliminated Kar9p localization along cytoplasmic microtubules. Furthermore, in the bim1 mutants, the cytoplasmic microtubules no longer intersected the cortical dot of Green Fluorescent Protein–Kar9p. These experiments demonstrate that the interaction of cytoplasmic microtubules with the Kar9p cortical attachment site requires the microtubule-binding protein Bim1p.

scholarly journals The cortical protein Lte1 promotes mitotic exit by inhibiting the spindle position checkpoint kinase Kin4

2011 ◽  
Vol 193 (6) ◽  
pp. 1033-1048 ◽  
Author(s):  
Daniela Trinca Bertazzi ◽  
Bahtiyar Kurtulmus ◽  
Gislene Pereira
Keyword(s):  
Kinase Activity ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Exit ◽  
Cell Protein ◽  
Cell Axis ◽  
Pole Body ◽  
Catalytically Active ◽  
Surveillance Mechanism ◽  
Spindle Position

The spindle position checkpoint (SPOC) is an essential surveillance mechanism that allows mitotic exit only when the spindle is correctly oriented along the cell axis. Key SPOC components are the kinase Kin4 and the Bub2–Bfa1 GAP complex that inhibit the mitotic exit–promoting GTPase Tem1. During an unperturbed cell cycle, Kin4 associates with the mother spindle pole body (mSPB), whereas Bub2–Bfa1 is at the daughter SPB (dSPB). When the spindle is mispositioned, Bub2–Bfa1 and Kin4 bind to both SPBs, which enables Kin4 to phosphorylate Bfa1 and thereby block mitotic exit. Here, we show that the daughter cell protein Lte1 physically interacts with Kin4 and inhibits Kin4 kinase activity. Specifically, Lte1 binds to catalytically active Kin4 and promotes Kin4 hyperphosphorylation, which restricts Kin4 binding to the mSPB. This Lte1-mediated exclusion of Kin4 from the dSPB is essential for proper mitotic exit of cells with a correctly aligned spindle. Therefore, Lte1 promotes mitotic exit by inhibiting Kin4 activity at the dSPB.

scholarly journals Analysis of a Spindle Pole Body Mutant Reveals a Defect in Biorientation and Illuminates Spindle Forces

2005 ◽  
Vol 16 (1) ◽  
pp. 141-152 ◽  
Author(s):  
Tennessee J. Yoder ◽  
Mark A. McElwain ◽  
Susan E. Francis ◽  
Joy Bagley ◽  
Eric G.D. Muller ◽  
...  
Keyword(s):  
Fluorescent Protein ◽  
Spindle Pole Body ◽  
Resonance Energy Transfer ◽  
Resonance Energy ◽  
Spindle Pole ◽  
Microtubule Organizing Center ◽  
Bipolar Spindle ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Mutant Cells

The spindle pole body (SPB) is the microtubule organizing center in Saccharomyces cerevisiae. An essential task of the SPB is to ensure assembly of the bipolar spindle, which requires a proper balancing of forces on the microtubules and chromosomes. The SPB component Spc110p connects the ends of the spindle microtubules to the core of the SPB. We previously reported the isolation of a mutant allele spc110-226 that causes broken spindles and SPB disintegration 30 min after spindle formation. By live cell imaging of mutant cells with green fluorescent protein (GFP)-Tub1p or Spc97p-GFP, we show that spc110-226 mutant cells have early defects in spindle assembly. Short spindles form but do not advance to the 1.5-μm stage and frequently collapse. Kinetochores are not arranged properly in the mutant cells. In 70% of the cells, no stable biorientation occurs and all kinetochores are associated with only one SPB. Examination of the SPB remnants by electron microscopy tomography and fluorescence microscopy revealed that the Spc110-226p/calmodulin complex is stripped off of the central plaque of the SPB and coalesces to from a nucleating structure in the nucleoplasm. The central plaque components Spc42p and Spc29p remain behind in the nuclear envelope. The delamination is likely due to a perturbed interaction between Spc42p and Spc110-226p as detected by fluorescence resonance energy transfer analysis. We suggest that the force exerted on the SPB by biorientation of the chromosomes pulls the Spc110-226p out of the SPB; removal of force exerted by coherence of the sister chromatids reduced fragmentation fourfold. Removal of the forces exerted by the cytoplasmic microtubules had no effect on fragmentation. Our results provide insights into the relative contributions of the kinetochore and cytoplasmic microtubules to the forces involved in formation of a bipolar spindle.

scholarly journals Structural Mutants of the Spindle Pole Body Cause Distinct Alteration of Cytoplasmic Microtubules and Nuclear Dynamics in Multinucleated Hyphae

2010 ◽  
Vol 21 (5) ◽  
pp. 753-766 ◽  
Author(s):  
Claudia Lang ◽  
Sandrine Grava ◽  
Mark Finlayson ◽  
Rhonda Trimble ◽  
Peter Philippsen ◽  
...  
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Wild Type ◽  
Nuclear Dynamics ◽  
Pole Body ◽  
Nucleation Sites ◽  
Bridge Structures ◽  
Cytoplasmic Microtubules ◽  
Tangential Directions

In the multinucleate fungus Ashbya gossypii, cytoplasmic microtubules (cMTs) emerge from the spindle pole body outer plaque (OP) in perpendicular and tangential directions. To elucidate the role of cMTs in forward/backward movements (oscillations) and bypassing of nuclei, we constructed mutants potentially affecting cMT nucleation or stability. Hyphae lacking the OP components AgSpc72, AgNud1, AgCnm67, or the microtubule-stabilizing factor AgStu2 grew like wild- type but showed substantial alterations in the number, length, and/or nucleation sites of cMTs. These mutants differently influenced nuclear oscillation and bypassing. In Agspc72Δ, only long cMTs were observed, which emanate tangentially from reduced OPs; nuclei mainly moved with the cytoplasmic stream but some performed rapid bypassing. Agnud1Δ and Agcnm67Δ lack OPs; short and long cMTs emerged from the spindle pole body bridge/half-bridge structures, explaining nuclear oscillation and bypassing in these mutants. In Agstu2Δ only very short cMTs emanated from structurally intact OPs; all nuclei moved with the cytoplasmic stream. Therefore, long tangential cMTs promote nuclear bypassing and short cMTs are important for nuclear oscillation. Our electron microscopy ultrastructural analysis also indicated that assembly of the OP occurs in a stepwise manner, starting with AgCnm67, followed by AgNud1 and lastly AgSpc72.

scholarly journals Conservative Duplication of Spindle Poles during Meiosis in Saccharomyces cerevisiae

2001 ◽  
Vol 183 (7) ◽  
pp. 2372-2375 ◽  
Author(s):  
Andreas Wesp ◽  
Susanne Prinz ◽  
Gerald R. Fink
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spore Formation ◽  
Wild Type ◽  
Body Distribution ◽  
Spindle Poles ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Type Strains

ABSTRACT During sporulation in diploid Saccharomyces cerevisiae, spindle pole bodies acquire the so-called meiotic plaque, a prerequisite for spore formation. Mpc70p is a component of the meiotic plaque and is thus essential for spore formation. We show here that MPC70/mpc70 heterozygous strains most often produce two spores instead of four and that these spores are always nonsisters. In wild-type strains, Mpc70p localizes to all four spindle pole bodies, whereas in MPC70/mpc70 strains Mpc70p localizes to only two of the four spindle pole bodies, and these are always nonsisters. Our data can be explained by conservative spindle pole body distribution in which the two newly synthesized meiosis II spindle pole bodies of MPC70/mpc70 strains lack Mpc70p.

S. pombe sporulation-specific coiled-coil protein Spo15p is localized to the spindle pole body and essential for its modification

2000 ◽  
Vol 113 (3) ◽  
pp. 545-554 ◽  
Author(s):  
S. Ikemoto ◽  
T. Nakamura ◽  
M. Kubo ◽  
C. Shimoda
Keyword(s):  
Life Cycle ◽  
Fusion Gene ◽  
Spindle Pole Body ◽  
Coiled Coil ◽  
Spindle Pole ◽  
Wild Type ◽  
Membrane Formation ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Meiotic Spindles

Spindle pole bodies in the fission yeast Schizosaccharomyces pombe are required during meiosis, not only for spindle formation but also for the assembly of forespore membranes. The spo15 mutant is defective in the formation of forespore membranes, which develop into spore envelopes. The spo15(+)gene encodes a protein with a predicted molecular mass of 223 kDa, containing potential coiled-coil regions. The spo15 gene disruptant was not lethal, but was defective in spore formation. Northern and western analyses indicated that spo15(+) was expressed not only in meiotic cells but also in vegetative cells. When the spo15-GFP fusion gene was expressed by the authentic spo15 promoter during vegetative growth and sporulation, the fusion protein colocalized with Sad1p, which is a component of spindle pole bodies. Meiotic divisions proceeded in spo15delta cells with kinetics similar to those in wild-type cells. In addition, the morphology of the mitotic and meiotic spindles and the nuclear segregation were normal in spo15delta. Intriguingly, transformation of spindle pole bodies from a punctate to a crescent form prior to forespore membrane formation was not observed in spo15delta cells. We conclude that Spo15p is associated with spindle pole bodies throughout the life cycle and plays an indispensable role in the initiation of spore membrane formation.

scholarly journals FH3, A Domain Found in Formins, Targets the Fission Yeast Formin Fus1 to the Projection Tip During Conjugation

1998 ◽  
Vol 141 (5) ◽  
pp. 1217-1228 ◽  
Author(s):  
Janni Petersen ◽  
Olaf Nielsen ◽  
Richard Egel ◽  
Iain M. Hagan
Keyword(s):  
Fluorescent Protein ◽  
Protein Localization ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Amino Terminal ◽  
Gfp Fusion Protein ◽  
Pole Body ◽  
Body Component ◽  
Green Fluorescent ◽  
Amino Terminal Domain

Formins are involved in diverse aspects of morphogenesis, and share two regions of homology: FH1 and FH2. We describe a new formin homology region, FH3. FH3 is an amino-terminal domain that differs from the Rho binding site identified in Bni1p and p140mDia. The Schizosaccharomyces pombe formin Fus1 is required for conjugation, and is localized to the projection tip in cells of mating pairs. We replaced genomic fus1+ with green fluorescent protein (GFP)- tagged versions that lacked either the FH1, FH2, or FH3 domain. Deletion of any FH domain essentially abolished mating. FH3, but neither FH1 nor FH2, was required for Fus1 localization. An FH3 domain–GFP fusion protein localized to the projection tips of mating pairs. Thus, the FH3 domain alone can direct protein localization. The FH3 domains of both Fus1 and the S. pombe cytokinesis formin Cdc12 were able to localize GFP to the spindle pole body in half of the late G2 cells in a vegetatively growing population. Expression of both FH3-GFP fusions also affected cytokinesis. Overexpression of the spindle pole body component Sad1 altered the distribution of both Sad1 and the FH3-GFP domain. Together these data suggest that proteins at multiple sites can interact with FH3 domains.

Sign in / Sign up

Export Citation Format

Share Document