Purification of β-Ga2O3 crystals by the zone refining method

2019 ◽  
Vol 58 (11) ◽  
pp. 110908
Author(s):  
Toshimitsu Ito ◽  
Yasuko Ozaki ◽  
Yasuhide Tomioka
1961 ◽  
Vol 16 (1) ◽  
pp. 128A-128A ◽  
Author(s):  
Morio Inoue ◽  
Hiroyuki Mizuno

2011 ◽  
Vol 1341 ◽  
Author(s):  
K. H. Kim ◽  
A. E. Bolotnikov ◽  
G. S. Camarda ◽  
R. Tappero ◽  
A. Hossain ◽  
...  

ABSTRACTResidual impurities in manganese (Mn) are a big obstacle to obtaining high- performance CdMnTe (CMT) X-ray and gamma-ray detectors. Generally, the zone-refining method is an effective way to improve the material’s purity. In this work, we purified the MnTe compounds combining the zone-refining method with molten Te that has a very high solubility. We confirmed the improved purity of the material by glow-discharge mass spectrometry (GDMS). We also found that CMT crystals from a multiple refined MnTe source, grown by the vertical Bridgman method, yielded better performing detectors.


Author(s):  
E. Sukedai ◽  
M. Shimoda ◽  
A. Fujita ◽  
H. Nishizawa ◽  
H. Hashimoto

ω-phase particles formed in β-titanium alloys (bcc structure) act important roles to their mechanical properties such as ductility and hardness. About the ductility, fine ω-phase particles in β–titanium alloys improve the ductility, because ω-phase crystals becomes nucleation sites of α-phase and it is well known that (β+α) duplex alloys have higher ductility. In the present study, the formation sites and the formation mechanism of ω-phase crystals due to external stress and aging are investigated using the conventional and high resolution electron microscopy.A β-titanium alloy (Til5Mo5Zr) was supplied by Kobe Steel Co., and a single crystal was prepared by a zone refining method. Plates with {110} surface were cut from the crystal and were pressured hydrostatically, and stressed by rolling and tensile testing. Specimens for aging with tensile stress were also prepared from Ti20Mo polycrystals. TEM specimens from these specimens were prepared by a twin-jet electron-polishing machine. A JEM 4000EX electron microscope operated at 400k V was used for taking dark field and HREM images.


Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2064
Author(s):  
Liang Yu ◽  
Xiaoan Kang ◽  
Luona Chen ◽  
Kun Luo ◽  
Yanli Jiang ◽  
...  

The zone refining method is a physical method for effectively purifying metals. Increasing yield and reducing impurity content have always been the focus of its research. This article systematically summarizes the relevant research on the production of high-purity metals by zone refining, including mechanisms, parameter optimization, zone refining types, analysis methods, limitations, and future development directions, and it provides relevant theoretical foundations for the production of high-purity metals as well.


1981 ◽  
Vol 81 (2) ◽  
pp. 273-292 ◽  
Author(s):  
D. Fort ◽  
D.W. Jones ◽  
B.J. Beaudry ◽  
K.A. Gschneidner

Sign in / Sign up

Export Citation Format

Share Document