scholarly journals Evaluation of Shear Bond Strength of Feldspathic CAD/CAM Ceramic with Dentin using 2 Bonding Agents and 2 Surface Treatments- An Invitro Study

2015 ◽  
Author(s):  
Ramesh Reddy Jetti
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Bonding Agents ◽  
Cad Cam

scholarly journals Effects of different etching methods and bonding procedures on shear bond strength of orthodontic metal brackets applied to different CAD/CAM ceramic materials

2017 ◽  
Vol 88 (2) ◽  
pp. 221-226 ◽  
Author(s):  
S. Kutalmış Buyuk ◽  
Ahmet Serkan Kucukekenci
Keyword(s):  
Bond Strength ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Ceramic Materials ◽  
Ceramic Surface ◽  
Bonding Agents ◽  
Ceramic Surfaces ◽  
Different Types ◽  
Cad Cam ◽  
Hybrid Ceramic

ABSTRACT Objective: To investigate the shear bond strength (SBS) of orthodontic metal brackets applied to different types of ceramic surfaces treated with different etching procedures and bonding agents. Materials and Methods: Monolithic CAD/CAM ceramic specimens (N = 120; n = 40 each group) of feldspathic ceramic Vita Mark II, resin nanoceramic Lava Ultimate, and hybrid ceramic Vita Enamic were fabricated (14 × 12 × 3 mm). Ceramic specimens were separated into four subgroups (n = 10) according to type of surface treatment and bonding onto the ceramic surface. Within each group, four subgroups were prepared by phosphoric acid, hydrofluoric acid, Transbond XT primer, and Clearfill Ceramic primer. Mandibular central incisor metal brackets were bonded with light-cure composite. The SBS data were analyzed using three-way analysis of variance (ANOVA) and Tukey HSD tests. Results: The highest SBS was found in the Vita Enamic group, which is a hybrid ceramic, etched with hydrofluoric acid and applied Transbond XT Adhesive primer (7.28 ± 2.49 MPa). The lowest SBS was found in the Lava Ultimate group, which is a resin nano-ceramic etched with hydrofluoric acid and applied Clearfill ceramic primer (2.20 ± 1.21 MPa). Conclusions: CAD/CAM material types and bonding procedures affected bond strength (P < .05), but the etching procedure did not (P > .05). The use of Transbond XT as a primer bonding agent resulted in higher SBS.

scholarly journals Assessment the Bond Strength of Ceramic Brackets to CAD/CAM Nanoceramic Composite and Interpenetrating Network Composite after Different Surface Treatments

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Mustafa Mehmet Özarslan ◽  
Özlem Üstün ◽  
Ulviye Sebnem Buyukkaplan ◽  
Çağatay Barutcigil ◽  
Nurullah Türker ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Interpenetrating Network ◽  
Bonding Performance ◽  
Cad Cam ◽  
Ceramic Brackets ◽  
New Generation

Adult orthodontics may confront problems related to the bonding performance of orthodontic brackets to new generation restorative materials used for crown or laminate restorations. The aim of the present study was to investigate the shear bond strength of ceramic brackets to two new generation CAD/CAM interpenetrating network composite and nanoceramic composite after different surface treatments. Er,Cr:YSGG Laser, hydrofluoric acid (9%), sandblasting (50 μm Al2O3), and silane were applied to the surfaces of 120 CAD/CAM specimens with 2 mm thickness and then ceramic brackets were bonded to the treated surfaces of the specimens. Bond strength was evaluated using the shear bond strength test. According to the results, CAD/CAM block types and surface treatment methods have significant effects on shear bond strength. The lowest bond strength values were found in the specimens treated with silane (3.35 ± 2.09 MPa) and highest values were found in the specimens treated with sandblast (8.92 ± 2.77 MPa). Sandblasting and hydrofluoric acid surface treatment led to the most durable bonds for the two types of CAD/CAM blocks in the present study. In conclusion, different surface treatments affect the shear bond strength of ceramic brackets to CAD/CAM interpenetrating network composite and nanoceramic composite. Among the evaluated treatments, sandblasting and hydrofluoric acid application resulted in sufficient bonding strength to ceramic brackets for both of the CAD/CAM materials.

scholarly journals Effect of hydrofluoric acid surface treatments on micro-shear bond strength of CAD/CAM ceramics

10.19082/5487 ◽  
2017 ◽  
Vol 9 (10) ◽  
pp. 5487-5493 ◽  
Author(s):  
Faraneh Mokhtarpour ◽  
Homayoon Alaghehmand ◽  
Soraya Khafri
Keyword(s):  
Bond Strength ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Cad Cam

scholarly journals Shear Bond Strength of Repaired Ceramic-Metal Restorations Using Different Bonding Agents with Different Surface Treatments

2021 ◽  
Vol 9 (1) ◽  
pp. 01-09
Author(s):  
Ibrahim M. Hamouda ◽  
Enas M. Elddainony ◽  
Mosaad A. ELgabrouny ◽  
Fahim M. El-Shamy
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Hydrofluoric Acid ◽  
Shear Bond Strength ◽  
Surface Treatments ◽  
Acid Etching ◽  
Chromium Alloy ◽  
Bonding Agents ◽  
Nickel Chromium ◽  
Bonding Systems

Background: Fracture of ceramic-metal restorations is a major problem facing the dentists and the patients. There are several bonding systems currently available in the market to repair the fractured ceramic-metal restorations inside or outside the oral cavity. Purpose: The purpose of this study was to test the efficiency of repairing of metal-ceramic restorations using different bonding systems with different surface treatments. This efficiency was tested through the conduction of shear bond strength of the composite bonded to the porcelain and to nickel-chromium alloy using three different bonding agents (Excite, AdheSE, and Prompt L-Pop) with four different surface treatments (sandblasting and enchant, diamond stone roughening, sandblasting and hydrofluoric acid etching, or without surface treatment). Materials and Methods: A total of 120 specimens were prepared, 60 specimens from porcelain and 60 specimens from nickel-chromium alloy. Each group was divided into three equal subgroups, 20 specimens each, corresponding to the 3 bonding agents used. Each subgroup was further subdivided into four subgroups, 5 specimens each, corresponding to the surface treatment procedures. Bonding agents applied over all specimens and cured, followed by application of a micro-hybrid light-cured composite resin (Tetric Ceram). Thermal cycling was done for all specimens between 5°C and 55°C for 1000 cycles with a 10-second dwell time. Shear bond strength test was conducted using a universal testing machine ata cross-head speed of 0.5 mm/min. Results: The highest shear bond strength value recorded for the porcelain specimens bonded with Excite bonding agent with surface treatment sandblasting and hydrofluoric acid etching. In metal groups, the AdheSE bonding agent showed the highest shear bond strength value with the same surface treatment of the porcelain specimens. It was observed that sandblasting followed by hydrofluoric acid etching produced the most effective treatment method for porcelain and metal surfaces. Conclusion: The most effective technique for repairing metal ceramic restoration was sandblasting with hydrofluoric acid etching as surface treatment together with AdheSE or Excite bonding agents.

Sign in / Sign up

Export Citation Format

Share Document