scholarly journals FLUID-STRUCTURE INTERACTION ANALYSIS APPLIED TO OIL CONTAINMENT BOOMS

2005 ◽  
Vol 2005 (1) ◽  
pp. 585-588 ◽  
Author(s):  
Azin Amini ◽  
Maziar Mahzari ◽  
Erik Bollaert ◽  
Anton Schleiss
Keyword(s):  
Interaction Analysis ◽  
Fluid Structure Interaction ◽  
Flow Characteristics ◽  
Two Phase ◽  
Ongoing Research ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Oil Slick ◽  
Flexible Barrier ◽  
Waves And Currents

ABSTRACT The most important aspect of the ongoing research project is to develop numerical coupled hydraulic-structural analysis models of oil containment booms. This should be later applicable for investigation of the efficiency limits of a new system of oil spill containment booms called Cavalli system. This system consists of surrounding the oil slick with a special boom and protecting it against waves and currents. It provides the possibility to divide the encircled area in several smaller circles and to increase the thickness of the oil slick inside. The whole system consists of a two-phase fluid (oil and water) and a boom that should be structurally stable for the pressure loads imposed by the fluids. It is finally important to evaluate the behaviour of the flexible skirt under different wave and current conditions, as almost all of existing research in the field have been undertaken for rigid barriers. To assess the behaviour of a flexible barrier fluid-structure interaction analysis is to be conducted. The problem is considered as a fluid-structure interaction problem as the boom usually undergoes large deformations and rotations, which modifies the flow characteristics during operation that is not the case for a rigid boom.

scholarly journals Inhalation Induced Stresses and Flow Characteristics in Human Airways through Fluid-Structure Interaction Analysis

2008 ◽  
Vol 2008 ◽  
pp. 1-8 ◽  
Author(s):  
Kittisak Koombua ◽  
Ramana M. Pidaparti
Keyword(s):  
Computational Model ◽  
Interaction Analysis ◽  
Airway Remodeling ◽  
Fluid Structure Interaction ◽  
Flow Characteristics ◽  
Fluid Structure ◽  
Tissue Properties ◽  
Structure Interaction ◽  
Simulation Results ◽  
Human Airways

Better understanding of stresses and flow characteristics in the human airways is very important for many clinical applications such as aerosol drug therapy, inhalation toxicology, and airway remodeling process. The bifurcation geometry of airway generations 3 to 5 based on the ICRP tracheobronchial model was chosen to analyze the flow characteristics and stresses during inhalation. A computational model was developed to investigate the airway tissue flexibility effect on stresses and flow characteristics in the airways. The finite-element method with the fluid-structure interaction analysis was employed to investigate the transient responses of the flow characteristics and stresses in the airways during inhalation. The simulation results showed that tissue flexibility affected the maximum airflow velocity, airway pressure, and wall shear stress about 2%, 7%, and 6%, respectively. The simulation results also showed that the differences between the orthotropic and isotropic material models on the airway stresses were in the ranges of 25–52%. The results from the present study suggest that it is very important to incorporate the orthotropic tissue properties into a computational model for studying flow characteristics and stresses in the airways.

scholarly journals Fluid-Structure Interaction Analysis on Membrane Behavior of a Microfluidic Passive Valve

Membranes ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 300 ◽  
Author(s):  
Zhen-hao Lin ◽  
Xiao-juan Li ◽  
Zhi-jiang Jin ◽  
Jin-yuan Qian
Keyword(s):  
Fluid Flow ◽  
Flow Rate ◽  
Interaction Analysis ◽  
Fluid Structure Interaction ◽  
Flow Characteristics ◽  
Microfluidic System ◽  
Membrane Behavior ◽  
Fluid Structure ◽  
Constant Flow Rate ◽  
Structure Interaction

In this paper, the effect of membrane features on flow characteristics in the microfluidic passive valve (MPV) and the membrane behavior against fluid flow are studied using the fluid-structure interaction (FSI) analysis. Firstly, the microvalve model with different numbers of microholes and pitches of microholes are designed to investigate the flow rate of the MPV. The result shows that the number of microholes on the membrane has a significant impact on the flow rate of the MPV, while the pitch of microholes has little effect on it. The constant flow rate maintained by the microvalve (the number of microholes n = 4) is 5.75 mL/min, and the threshold pressure to achieve the flow rate is 4 kPa. Secondly, the behavior of the membrane against the fluid flow is analyzed. The result shows that as the inlet pressure increases, the flow resistance of the MPV increases rapidly, and the deformation of the membrane gradually becomes stable. Finally, the effect of the membrane material on the flow rate and the deformation of the membrane are studied. The result shows that changes in the material properties of the membrane cause a decrease in the amount of deformation in all stages the all positions of the membrane. This work may provide valuable guidance for the optimization of microfluidic passive valve in microfluidic system.

scholarly journals Coupling Analysis of Fluid-Structure Interaction and Flow Erosion of Gas-Solid Flow in Elbow Pipe

2014 ◽  
Vol 6 ◽  
pp. 815945 ◽  
Author(s):  
Hongjun Zhu ◽  
Hongnan Zhao ◽  
Qian Pan ◽  
Xue Li
Keyword(s):  
Erosion Rate ◽  
Structural Changes ◽  
Fluid Structure Interaction ◽  
Fluid Phase ◽  
Diameter Ratio ◽  
Pipe Diameter ◽  
Discrete Phase Model ◽  
Two Phase ◽  
Fluid Structure ◽  
Structure Interaction

A numerical simulation has been conducted to investigate flow erosion and pipe deformation of elbow in gas-solid two-phase flow. The motion of the continuous fluid phase is captured based on calculating three-dimensional Reynolds-averaged-Navier-Stokes (RANS) equations, while the kinematics and trajectory of the discrete particles are evaluated by discrete phase model (DPM), and a fluid-structure interaction (FSI) computational model is adopted to calculate the pipe deformation. The effects of inlet velocity, pipe diameter, and the ratio of curvature and diameter on flow feature, erosion rate, and deformation of elbow are analyzed based on a series of numerical simulations. The numerical results show that flow field, erosion rate, and deformation of elbow are all sensitive to the structural changes and inlet condition changes. Higher inlet rate, smaller curvature diameter ratio, or smaller pipe diameter leads to greater deformation, while slower inlet rate, larger curvature diameter ratio, and larger pipe diameter can weaken flow erosion.

Sign in / Sign up

Export Citation Format

Share Document