scholarly journals Experimental and Numerical Study on the Plume Rising in Stairwell of Buildings

2021 ◽  
Vol 21 (6) ◽  
pp. 85-96
Author(s):  
Doo-young Kim ◽  
Jeong-yeop Kim ◽  
Chan-sol Ahn
Keyword(s):  
Numerical Analysis ◽  
Heat Source ◽  
Numerical Study ◽  
Emergency Situation ◽  
Vertical Shaft ◽  
Source Power ◽  
Fire Smoke ◽  
Serious Injuries ◽  
And Diffusion ◽  
Chimney Effect

In recent years, it has been observed that when a fire occurs in a multi-use facility, a toxic fire smoke rapidly rises through the vertical shaft and spreads due to the chimney effect and hot buoyancy. Generally, the fire smoke spreads rapidly through a number of evacuation passages installed for safe evacuation, which adversely affects an emergency situation. Due to the lack of this knowledge among the occupants, the majority of the occupants are evacuated using the stairwells, getting suffocated by poisonous smoke and suffering serious injuries. The present study considered the fire smoke spreading vertically through the stairwell. For this purpose, the power of the heat source and the area of the ventilation windows connected to the stairwell were modified, and the movement and diffusion of the hot plume rising vertically in the stairwell were observed. For the experiment, a 1/20 scaled-down stairwell model was employed, and the temperature ‘T’ and the vertical velocity ‘w’ of the hot plume rising inside the stairwell were measured using a 60 W-180 W heat source power. Numerical analysis was performed using FDS under similar conditions, and the results were compared with the experimental results.

Numerical Study on Fire Smoke Movement in Elevator Shafts Under Piston Effect

2012 ◽  
Vol 22 (4) ◽  
pp. 387-405 ◽  
Author(s):  
Yanqiu Chen ◽  
Lizhong Yang ◽  
Taolin Zhang
Keyword(s):  
Numerical Study ◽  
Smoke Movement ◽  
Piston Effect ◽  
Fire Smoke

The Effect of the Thickness and Angle of the Inlet and Outlet Guide Vane on the Performance of Axial-Flow Pump

2016 ◽  
Author(s):  
Sang-Won Kim ◽  
Youn-Jea Kim
Keyword(s):  
Numerical Analysis ◽  
Numerical Study ◽  
Guide Vane ◽  
Axial Flow ◽  
Inlet Guide Vane ◽  
Guide Vanes ◽  
Pump Performance ◽  
Blade Thickness ◽  
Axial Flow Pump ◽  
Flow Pump

An axial-flow pump has a relatively high discharge flow rate and specific speed at a relatively low head and it consists of an inlet guide vane, impeller, and outlet guide vane. The interaction of the flow through the inlet guide vane, impeller, and outlet guide vane of the axial-flow pump has a significant effect on its performance. Of those components, the guide vanes especially can improve the head and efficiency of the pump by transforming the kinetic energy of the rotating flow, which has a tangential velocity component, into pressure energy. Accordingly, the geometric configurations of the guide vanes such as blade thickness and angle are crucial design factors for determining the performance of the axial-flow pump. As the reliability of Computational Fluid Dynamics (CFD) has been elevated together with the advance in computer technology, numerical analysis using CFD has recently become an alternative to empirical experiment due to its high reliability to measure the flow field. Thus, in this study, 1,200mm axial-flow pump having an inlet guide vane and impeller with 4 blades and an outlet guide vane with 6 blades was numerically investigated. Numerical study was conducted using the commercial CFD code, ANSYS CFX ver. 16.1, in order to elucidate the effect of the thickness and angle of the guide vanes on the performance of 1,200mm axial-flow pump. The stage condition, which averages the fluxes between interfaces and is accordingly appropriate for the evaluation of pump performance, was adopted as the interface condition between the guide vanes and the impeller. The rotational periodicity condition was used in order to enable a simplified geometry to be used since the guide vanes feature multiple identical regions. The shear stress transport (SST) k-ω model, predicting the turbulence within the flow in good agreement, was also employed in the CFD calculation. With regard to the numerical simulation results, the characteristics of the pressure distribution were discussed in detail. The pump performance, which will determine how well an axial-flow pump will work in terms of its efficiency and head, was also discussed in detail, leading to the conclusion on the optimal blade thickness and angle for the improvement of the performance. In addition, the total pressure loss coefficient was considered in order to investigate the loss within the flow paths depending on the thickness and angle variations. The results presented in this study may give guidelines to the numerical analysis of the axial-flow pump and the investigation of the performance for further optimal design of the axial-flow pump.

scholarly journals Effect of Heat Source Position in Fluid Flow, Heat Transfer and Entropy Generation in a Naturally Ventilated Room

Mathematics ◽  
2022 ◽  
Vol 10 (2) ◽  
pp. 178
Author(s):  
Mohammed Alghaseb ◽  
Walid Hassen ◽  
Abdelhakim Mesloub ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Rayleigh Number ◽  
Heat Source ◽  
Numerical Study ◽  
Temperature Fields ◽  
Left Wall ◽  
Heating Efficiency ◽  
Discrete Heat Source ◽  
Volume Method ◽  
The Impact

In this study, a 3D numerical study of free ventilated room equipped with a discrete heat source was performed using the Finite Volume Method (FVM). To ensure good ventilation, two parallel openings were created in the room. A suction opening was located at the bottom of the left wall and another opening was located at the top of the opposite wall; the heat source was placed at various positions in order to compare the heating efficiency. The effects of Rayleigh number (103 ≤ Ra ≤ 106) for six heater positions was studied. The results focus on the impact of these parameters on the particle trajectories, temperature fields and on the heat transfer inside the room. It was found that the position of the heater has a dramatic effect on the behavior and topography of the flow in the room. When the heat source was placed on the wall with the suction opening, two antagonistic behaviors were recorded: an improvement in heat transfer of about 31.6%, compared to the other positions, and a low Rayleigh number against 22% attenuation for high Ra values was noted.

scholarly journals Numerical Investigation of Mixed Convection and Entropy Generation in a Wavy-Walled Cavity Filled with Nanofluid and Involving a Rotating Cylinder

Entropy ◽  
2018 ◽  
Vol 20 (9) ◽  
pp. 664 ◽  
Author(s):  
Ammar Alsabery ◽  
Muneer Ismael ◽  
Ali Chamkha ◽  
Ishak Hashim
Keyword(s):  
Heat Exchange ◽  
Rayleigh Number ◽  
Heat Source ◽  
Mixed Convection ◽  
Volume Fraction ◽  
Numerical Study ◽  
Rotational Velocity ◽  
Geometrical Parameters ◽  
Galerkin Finite Element ◽  
Vertical Walls

This numerical study considers the mixed convection and the inherent entropy generated in Al 2 O 3 –water nanofluid filling a cavity containing a rotating conductive cylinder. The vertical walls of the cavity are wavy and are cooled isothermally. The horizontal walls are thermally insulated, except for a heat source segment located at the bottom wall. The dimensionless governing equations subject to the selected boundary conditions are solved numerically using the Galerkin finite-element method. The study is accomplished by inspecting different ranges of the physical and geometrical parameters, namely, the Rayleigh number ( 10 3 ≤ R a ≤ 10 6 ), angular rotational velocity ( 0 ≤ Ω ≤ 750 ), number of undulations ( 0 ≤ N ≤ 4 ), volume fraction of Al 2 O 3 nanoparticles ( 0 ≤ ϕ ≤ 0.04 ), and the length of the heat source ( 0.2 ≤ H ≤ 0.8 ) . The results show that the rotation of the cylinder boosts the rate of heat exchange when the Rayleigh number is less than 5 × 10 5 . The number of undulations affects the average Nusselt number for a still cylinder. The rate of heat exchange increases with the volume fraction of the Al 2 O 3 nanoparticles and the length of the heater segment.

Sign in / Sign up

Export Citation Format

Share Document