Adsorption of Gas-Phase Cyclohexanone on Atmospheric Water Films

The fate of atmospheric volatile organic compounds (VOCs) strongly depends on the partitioning processes on the surface of aerosols, which are coated with a thin water film. However, the behavior of VOCs in the aqueous film of aerosols is difficult to measure. In this work, the interfacial partition constant of cyclohexanone was determined using a novel flow-tube reactor. A thin, aqueous film placed in the reactor was exposed to cyclohexanone gas. The subsequent partitioning was measured using chromatography techniques. The quality control tests were first conducted to ensure the accuracy of the adsorption experiments. The cyclohexanone concentration was then plotted as a function of film thickness to obtain the partitioning constants. As the thickness of the water film decreased, the aqueous concentration of cyclohexanone increased, indicating that surface adsorption played a dominant role in the uptake of cyclohexanone. According to the temperature dependence of the interfacial partition constant, the solvation enthalpy and entropy of cyclohexanone were obtained. The results of this study would help to elucidate the effect of atmospheric water film on the gas–aerosol partitioning of VOCs, and thus can help to better understand the fate of VOCs in the atmosphere.

Formaldehyde and Glyoxal Measurement Deploying a Selected Ion Flow Tube Mass Spectrometer (SIFT-MS)

Formaldehyde (FM) and glyoxal (GL) are important atmospheric species of indoor and outdoor environments. They are either directly emitted in the atmosphere or they are formed through the oxidation of organic compounds by indoor and/or outdoor atmospheric oxidants. Despite their importance, the real-time monitoring of these compounds with soft ionization mass spectrometric techniques, e.g. proton transfer mass spectrometry (PTR-MS), remains problematic and is accompanied by low sensitivity. In this study, we evaluate the performance of a multi-ion selected ion flow tube mass spectrometer (SIFT-MS) to monitor in real-time atmospherically relevant concentrations of FM and GL under controlled experimental conditions. The SIFT-MS used is operated under standard conditions (SC), as proposed by the supplier, and customized conditions (CC), to achieve higher sensitivity. In the case of FM, SIFT-MS sensitivity is marginally impacted by RH, and the detection limits achieved are below 200 ppt. Contrariwise, in the case of GL, a sharp decrease of instrument sensitivity is observed with increasing RH when the H3O+ ion is used. Nevertheless, the detection of GL using NO+ precursor ion is moderately impacted by moisture with an actual positive sensitivity response. Therefore, we recommend the use of NO+ precursor for reliable detection and quantitation of GL. This work evidences that SIFT-MS can be considered as an efficient tool to monitor the concentration of FM and GL using SIFT-MS in laboratory experiments and potentially in indoor or outdoor environments. Furthermore, SIFT-MS technology still allows great possibilities for sensitivity improvement and high potential for monitoring low proton transfer affinity compounds.