A Survey of Islanding Detection Methods for Microgrids and Assessment of Non-Detection Zones in Comparison with Grid Codes

Detection of unintentional islanding is critical in microgrids in order to guarantee personal safety and avoid equipment damage. Most islanding detection techniques are based on monitoring and detecting abnormalities in magnitudes such as frequency, voltage, current and power. However, in normal operation, the utility grid has fluctuations in voltage and frequency, and grid codes establish that local generators must remain connected if deviations from the nominal values do not exceed the defined thresholds and ramps. This means that islanding detection methods could not detect islanding if there are fluctuations that do not exceed the grid code requirements, known as the non-detection zone (NDZ). A survey on the benefits of islanding detection techniques is provided, showing the advantages and disadvantages of each one. NDZs size of the most common passive islanding detection methods are calculated and obtained by simulation and compared with the limits obtained by ENTSO-E and islanding standards in the function of grid codes requirements in order to compare the effectiveness of different techniques and the suitability of each one.

RES Based Islanded DC Microgrid with Enhanced Electrical Network Islanding Detection

An electrical islanding detection method for DC microgrid (MG) is proposed in this paper. Unlikely conventional AC MG system protection has been challenging for the DC MG system. The goal of the proposed scheme is to detect the islanding intelligently within the agent nodes. The proposed islanding detection technique detects the electrical link failure intelligently, and if any electrical link failure occurs, then the proposed technique maintains the MG operation and load sharing. Islanding detection is carried out using an injection signal and utilizes the existing communication network to check network connectivity. After checking the network connectivity, all the nodes maintain the look-up table of the connected network. This research work illustrates that the proposed electrical islanding detection technique is effective in maintaining the DC MG operation in the case of an electrical islanding/link failure scenario. The proposed scheme’s performance is checked through MATLAB/Simulink for the detection of islanding and maintaining the operation.