Tunability for anomalous refraction of flexural wave in a magneto-elastic metasurface by magnetic field and pre-stress

This letter reports the design of a magneto-elastic metasurface composed of arrayed Terfenol-D pillars deposited on a homogeneous Aluminum plate, aiming to realize the tunability of flexural wave anomalous propagation without altering the structure. Considering the magneto-mechanical coupling of magnetostrictive materials, the phase shift and transmission of functional unit can be calculated. The anomalous refraction of incident flexural wave (i.e., negative refraction) can be accomplished by adjusting magnetic field and pre-stress properly, the refraction angle is remarkably affected by magnetic distribution. The proposed metasurface provides a method for flexible tunability of elastic wave in the fields of vibration/noise control.

Large full-thickness wounded skin regeneration using 3D-printed elastic scaffold with minimal functional unit of skin

Traditional tissue engineering skin are composed of living cells and natural or synthetic scaffold. Besize the time delay and the risk of contamination involved with cell culture, the lack of autologous cell source and the persistence of allogeneic cells in heterologous grafts have limited its application. This study shows a novel tissue engineering functional skin by carrying minimal functional unit of skin (MFUS) in 3D-printed polylactide-co-caprolactone (PLCL) scaffold and collagen gel (PLCL + Col + MFUS). MFUS is full-layer micro skin harvested from rat autologous tail skin. 3D-printed PLCL elastic scaffold has the similar mechanical properties with rat skin which provides a suitable environment for MFUS growing and enhances the skin wound healing. Four large full-thickness skin defects with 30 mm diameter of each wound are created in rat dorsal skin, and treated either with tissue engineering functional skin (PLCL + Col + MFUS), or with 3D-printed PLCL scaffold and collagen gel (PLCL + Col), or with micro skin islands only (Micro skin), or without treatment (Normal healing). The wound treated with PLCL + Col + MFUS heales much faster than the other three groups as evidenced by the fibroblasts migration from fascia to the gap between the MFUS dermis layer, and functional skin with hair follicles and sebaceous gland has been regenerated. The PLCL + Col treated wound heals faster than normal healing wound, but no skin appendages formed in PLCL + Col-treated wound. The wound treated with micro skin islands heals slower than the wounds treated either with tissue engineering skin (PLCL + Col + MFUS) or with PLCL + Col gel. Our results provide a new strategy to use autologous MFUS instead “seed cells” as the bio-resource of engineering skin for large full-thickness skin wound healing.

Human Muscle Synergy Analysis to Approach the Understanding of Brain Control Algorithm

Purpose: Muscle synergy is a functional unit that coordinates the activity of a number of muscles. In this study, the extraction of muscle synergies in three types of hand movements in the horizontal plane is investigated. Materials and Methods: So, after constructing the tracking pattern of three signals, by LabVIEW, the Electromyography (EMG) signal from six muscles of hand was recorded. Then time-constant muscle synergies and their activity curves from the recorded EMG signals were extracted using Non-negative Matrix Factorization (NMF) method. Results: Comparison of these patterns showed that the non-random motions’ synergies were more similar than the random motions among different individuals. It was observed that in all movements, the similarity of the synergies in one cluster was greater than the similarity of their corresponding activation curves. Conclusion: The results showed that the complexity of the recurrence plot in random movement is greater than that of the other movements.

Challenges and perspectives of brain science in Mongolia and Central Asian countries

"What is the origin of the mind?", "What is the organ of intelligence?" The first answers to these questions trace to the scripts of ancient Sumeria and Egypt. It took almost 4000 years to understand that the brain is the main organ that controls other organs. The dawn of modern neuroscience lay in the 1890s when the pioneering works of Camillo Golgi and Ramon Cajal invented the structure of the nervous system using microscope techniques. Cajal's neuron doctrine, which hypothesizes that the functional unit of the brain is the neuron, has become the main concept that explains the mind and body interactions.

Pharmacological Investigations in Glia Culture Model of Inflammation

Astrocytes and microglia are the main cell population besides neurons in the central nervous system (CNS). Astrocytes support the neuronal network via maintenance of transmitter and ion homeostasis. They are part of the tripartite synapse, composed of pre- and postsynaptic neurons and perisynaptic astrocytic processes as a functional unit. There is an increasing evidence that astroglia are involved in the pathophysiology of CNS disorders such as epilepsy, autoimmune CNS diseases or neuropsychiatric disorders, especially with regard to glia-mediated inflammation. In addition to astrocytes, investigations on microglial cells, the main immune cells of the CNS, offer a whole network approach leading to better understanding of non-neuronal cells and their pathological role in CNS diseases and treatment. An in vitro astrocyte-microglia co-culture model of inflammation was developed by Faustmann et al. (2003), which allows to study the endogenous inflammatory reaction and the cytokine expression under drugs in a differentiated manner. Commonly used antiepileptic drugs (e.g., levetiracetam, valproic acid, carbamazepine, phenytoin, and gabapentin), immunomodulatory drugs (e.g., dexamethasone and interferon-beta), hormones and psychotropic drugs (e.g., venlafaxine) were already investigated, contributing to better understanding mechanisms of actions of CNS drugs and their pro- or anti-inflammatory properties concerning glial cells. Furthermore, the effects of drugs on glial cell viability, proliferation and astrocytic network were demonstrated. The in vitro astrocyte-microglia co-culture model of inflammation proved to be suitable as unique in vitro model for pharmacological investigations on astrocytes and microglia with future potential (e.g., cancer drugs, antidementia drugs, and toxicologic studies).

Life Cycle Assessment in mineral processing – a review of the role of flotation

Purpose The aim of this literature review is to investigate the role of the beneficiation stage in the Life Cycle Assessment (LCA) of metals and minerals with a focus on the flotation process. Methods The systematic literature search included LCA studies comprising the beneficiation stage in their system boundaries and resulted in 29 studies that met the criteria requirements and were analysed. First, the system boundaries are investigated, along with the level of detail in the description of the sub-processes (e.g. flotation) and data granularity. Then, the life cycle inventories are scrutinised: data transparency and the relation between system granularity and data availability is commented. Of particular relevance, the way in which the functional unit is dealt with is examined. Finally, studies impact assessments are compared and discussed, and key parameters are highlighted. Results and discussion For system boundaries, beneficiation is generally embedded into the mining stage. Even when described on its own, important sub-processes (e.g. flotation) are not considered, except for eight cases analysed. Functional unit definition is hindered by the output of the system being an intermediate product. Indeed, most studies use a declared functional unit but fail to provide its relevant characteristics, which is essential for a correct interpretation of results and for comparisons. Most studies rely on secondary data, not always presented transparently, to describe beneficiation. Results on the role of beneficiation in the metal value chain environmental impacts are conflicting, partly because of its site dependency. Site-dependent parameters found to be determining are ore grade, energy mix, mining technique, concentrate grade and ore mineralogy. Conclusions The flotation process, and more generally the beneficiation stage, is typically overlooked in LCA studies despite its growing relevance. Beneficiation not being assessed as a standalone stage, detailed in its subprocess, the use of outdated and secondary data, along with a lack of transparency in the inventory and in the key parameters are all factors that affect the environmental assessment of the entire metal and mineral sector, and thus the LCA of many products. Recommendation Greater efforts should be allocated to considering the sub-processes in the beneficiation stage, particularly flotation. Information on the identified key parameters should be available to the practitioners and sensitivity analyses to investigate their influence are recommended. Hotspots specific to flotation have been identified and should be used to orient data gathering when focusing on this process. Five options of functional unit and their application are recommended.

Improving Building Acoustics

One of the most significant aspects which need to be analysed in the case of a building consists in finding that the sound level perceived by listeners is a proper one (Daniela-Roxana Tămaş-Gavrea et all., 2012). Their inconsistent spreading can develop problems in audition which can be solved only by putting in work a number of measures of acoustic rehabilitation. The evaluation of the acoustic quality of a building is a delicate issue, because of the complex system of the sound field contained in closed spaces and the sound features of the outlining surfaces. This paper presents a research on improving the acoustic conditions of a building which initially had a technical-administrative destination and was then converted into an office building (Stanca S.E., 2021). The measures of acoustic protection were recommended with a view to mitigate the noise level under admissible limits in the functional unit under consideration.