Detailed Analysis of Fiber Motion in Human Nasal Airways

Information on the fiber particle transport and deposition in human nasal airways is of great importance in inhalation toxicology study. Due to the complex interactions between the inhaled aerosol particles and human respiratory airways, the particles’ toxicity varies with their chemical composition, size, and shape. In the earlier computational study of fiber particle motion in human nasal cavities, overall deposition efficiency curves were evaluated and compared with the available experimental data. The majority of investigations were on micron-scale fiber particles, and the observed deposition fraction is strongly affected by fiber inertial impaction and the geometry of the cavity. The fiber characterization by its equivalent spheres is still not entirely fully understood. Limited existing evidence indicated that, when benchmarked by the impaction parameter, spherical particles tend to have a higher deposition fraction than that of the elongated fiber particles in the nasal cavity. More data is needed to elaborate on these observations and reveal the underlying physics. A more profound understanding of fiber transport in human airways may be obtained by comparing the fibrous particle deposition to that of the spherical particles. In this study, simulations of transport and deposition of elongated particles in a realistic human nasal cavity model for a steady laminar airflow rate were performed. FLUENT 19.2 was used to solve the airflow conditions. The elongated ellipsoidal particle transport and deposition were simulated using the coupled translational and rotational equations of motion. The hydrodynamic drag and torque, shear-induced lift, and gravitational force were included in the analysis. One-way coupling was assumed, and an in-house User Defined Function (UDF) was developed and was implemented into the ANSYS-FLUENT code for analyzing the fiber transport and deposition. The airflow field, the particle deposition efficiency, particle deposition pattern, and single-particle trajectories of fiber and sphere were analyzed and presented. The simulation results were compared with available experimental data and simulation results in the literature.

Effect of position of the fiber transport channel on fiber motion in the high-speed rotor

The task of the fiber transport channel (FTC) is to transport the fibers from the carding roller to the rotor. Its geometric position in the spinning machine has a strong influence on the characteristics of the airflow field and the trajectory of the fiber motion in both the rotor and the FTC. In this paper, a three-dimensional pumping rotor spinning channel model was established using ANSYS-ICEM-CFD software with three different positions of the FTC (positions a–c). Further, the simulations of air distribution were performed using Fluent software. In addition, the discrete phase model was used to fit the fiber motion trajectory in the rotor. The simulation results showed that among the three types of FTC, position b is the optimal condition. The gradients of airflow velocity in the channel at position b were greater than those of the other two positions, which is conducive to straightening of the fiber.