An Energy-Efficient DRAM Cache Architecture for Mobile Platforms With PCM-Based Main Memory

A long battery life is a first-class design objective for mobile devices, and main memory accounts for a major portion of total energy consumption. Moreover, the energy consumption from memory is expected to increase further with ever-growing demands for bandwidth and capacity. A hybrid memory system with both DRAM and PCM can be an attractive solution to provide additional capacity and reduce standby energy. Although providing much greater density than DRAM, PCM has longer access latency and limited write endurance to make it challenging to architect it for main memory. To address this challenge, this article introduces CAMP, a novel DRAM c ache a rchitecture for m obile platforms with P CM-based main memory. A DRAM cache in this environment is required to filter most of the writes to PCM to increase its lifetime, and deliver highest efficiency even for a relatively small-sized DRAM cache that mobile platforms can afford. To address this CAMP divides DRAM space into two regions: a page cache for exploiting spatial locality in a bandwidth-efficient manner and a dirty block buffer for maximally filtering writes. CAMP improves the performance and energy-delay-product by 29.2% and 45.2%, respectively, over the baseline PCM-oblivious DRAM cache, while increasing PCM lifetime by 2.7×. And CAMP also improves the performance and energy-delay-product by 29.3% and 41.5%, respectively, over the state-of-the-art design with dirty block buffer, while increasing PCM lifetime by 2.5×.

Software Hint-Driven Data Management for Hybrid Memory in Mobile Systems

Hybrid memory systems, comprised of emerging non-volatile memory (NVM) and DRAM, have been proposed to address the growing memory demand of current mobile applications. Recently emerging NVM technologies, such as phase-change memories (PCM), memristor, and 3D XPoint, have higher capacity density, minimal static power consumption and lower cost per GB. However, NVM has longer access latency and limited write endurance as opposed to DRAM. The different characteristics of distinct memory classes render a new challenge for memory system design. Ideally, pages should be placed or migrated between the two types of memories according to the data objects’ access properties. Prior system software approaches exploit the program information from OS but at the cost of high software latency incurred by related kernel processes. Hardware approaches can avoid these latencies, however, hardware’s vision is constrained to a short time window of recent memory requests, due to the limited on-chip resources. In this work, we propose OpenMem: a hardware-software cooperative approach that combines the execution time advantages of pure hardware approaches with the data object properties in a global scope. First, we built a hardware-based memory manager unit (HMMU) that can learn the short-term access patterns by online profiling, and execute data migration efficiently. Then, we built a heap memory manager for the heterogeneous memory systems that allows the programmer to directly customize each data object’s allocation to a favorable memory device within the presumed object life cycle. With the programmer’s hints guiding the data placement at allocation time, data objects with similar properties will be congregated to reduce unnecessary page migrations. We implemented the whole system on the FPGA board with embedded ARM processors. In testing under a set of benchmark applications from SPEC 2017 and PARSEC, experimental results show that OpenMem reduces 44.6% energy consumption with only a 16% performance degradation compared to the all-DRAM memory system. The amount of writes to the NVM is reduced by 14% versus the HMMU-only, extending the NVM device lifetime.

Application-Oriented Data Migration to Accelerate In-Memory Database on Hybrid Memory

With the advantage of faster data access than traditional disks, in-memory database systems, such as Redis and Memcached, have been widely applied in data centers and embedded systems. The performance of in-memory database greatly depends on the access speed of memory. With the requirement of high bandwidth and low energy, die-stacked memory (e.g., High Bandwidth Memory (HBM)) has been developed to extend the channel number and width. However, the capacity of die-stacked memory is limited due to the interposer challenge. Thus, hybrid memory system with traditional Dynamic Random Access Memory (DRAM) and die-stacked memory emerges. Existing works have proposed to place and manage data on hybrid memory architecture in the view of hardware. This paper considers to manage in-memory database data in hybrid memory in the view of application. We first perform a preliminary study on the hotness distribution of client requests on Redis. From the results, we observe that most requests happen on a small portion of data objects in in-memory database. Then, we propose the Application-oriented Data Migration called ADM to accelerate in-memory database on hybrid memory. We design a hotness management method and two migration policies to migrate data into or out of HBM. We take Redis under comprehensive benchmarks as a case study for the proposed method. Through the experimental results, it is verified that our proposed method can effectively gain performance improvement and reduce energy consumption compared with existing Redis database.