Repeating Earthquake Detection and Characterisation in New Zealand: A Catalogue for the Raukumara Peninsula, Northern Hikurangi Subduction Margin

<p>Repeating earthquakes provide a novel way of monitoring how stresses load faults between large earthquakes. In this thesis, we develop a method and composite criterion for identifying repeating earthquakes in New Zealand and present New Zealand’s first long-duration repeating earthquake catalogue. This thesis addresses three primary objectives: (1) develop a method and composite criterion for identifying repeating earthquakes; (2) build a long-duration catalogue of repeating earthquakes for the Raukumara Peninsula; and (3) apply the method and composite criterion in different tectonic settings to investigate whether it can be applied more broadly elsewhere in New Zealand. The systematic identification of repeating earthquakes in New Zealand provides the first step in being able to monitor the state of stresses of New Zealand’s active faults in situ throughout the earthquake cycle. Studies elsewhere, particularly in Japan and California, have developed case-specific criteria for identifying repeating earthquakes. Building on these studies, we develop a method and composite criterion for identifying repeating earthquakes in New Zealand, focusing on seismicity around the Raukumara Peninsula. Our composite criterion states that for events to be identified as repeating earthquakes, two or more events must have a normalised cross-correlation of at least 0.95 at two or more seismic stations, when calculated for 75% of the earthquake coda. Sensitivity to correlation window length, filtering frequency-band and correlation threshold were tested during the development of the composite criterion. These tests indicated that small perturbations to the parameter thresholds did not affect our ability to detect repeating earthquakes using the composite criterion. By applying our composite criterion to seismicity around the Raukumara Peninsula, we identified 62 repeating earthquake families occurring between 2003 and 2018, consisting of 160 individual earthquakes. These families have a magnitude range of MW 1.5–4.5, and have recurrence intervals and family durations of < 1–12 years. High-precision absolute and relative locations were calculated using manual phase picks and cross-correlation re-picking. Focal mechanisms for 56 of the families were also determined, using P-wave first motions, revealing predominantly strike-slip and normal faulting at shallow depths, low-angle reverse faulting along the subduction interface, and normal faulting in the subducting plate. We compared the timing of the repeating earthquakes to slow-slip events previously identified using geodetic measurements around the Raukumara Peninsula and observed that repeating earthquakes occurred during 26 of the 31 identified periods of slow-slip. We also compared the seismic moment– recurrence interval relationship of the Raukumara Peninsula repeating earthquakes to that of earthquakes near Parkfield, California, identified by Nadeau and Johnson (1998), and observed a similar functional relationship. Slip-rates of the Raukumara Peninsula repeating earthquake families were also calculated using a slip-rate–moment relationship and were found to vary from < 10mm/yr to 80mm/yr. We applied the method and composite criterion developed for the Raukumara Peninsula to two other locations to ensure it could be applied successfully in other New Zealand regions with different seismotectonic characteristics. Using our workflow, we successfully identified four families in Marlborough, and three families around Fiordland. These families differ from those identified around the Raukumara Peninsula in that they had relatively short recurrence intervals and family durations, of 2 minutes– 15 months. The ability of the composite criterion to identify these families confirms its suitability for further studies of repeating earthquakes throughout New Zealand.</p>

Repeating Earthquake Detection and Characterisation in New Zealand: A Catalogue for the Raukumara Peninsula, Northern Hikurangi Subduction Margin

<p>Repeating earthquakes provide a novel way of monitoring how stresses load faults between large earthquakes. In this thesis, we develop a method and composite criterion for identifying repeating earthquakes in New Zealand and present New Zealand’s first long-duration repeating earthquake catalogue. This thesis addresses three primary objectives: (1) develop a method and composite criterion for identifying repeating earthquakes; (2) build a long-duration catalogue of repeating earthquakes for the Raukumara Peninsula; and (3) apply the method and composite criterion in different tectonic settings to investigate whether it can be applied more broadly elsewhere in New Zealand. The systematic identification of repeating earthquakes in New Zealand provides the first step in being able to monitor the state of stresses of New Zealand’s active faults in situ throughout the earthquake cycle. Studies elsewhere, particularly in Japan and California, have developed case-specific criteria for identifying repeating earthquakes. Building on these studies, we develop a method and composite criterion for identifying repeating earthquakes in New Zealand, focusing on seismicity around the Raukumara Peninsula. Our composite criterion states that for events to be identified as repeating earthquakes, two or more events must have a normalised cross-correlation of at least 0.95 at two or more seismic stations, when calculated for 75% of the earthquake coda. Sensitivity to correlation window length, filtering frequency-band and correlation threshold were tested during the development of the composite criterion. These tests indicated that small perturbations to the parameter thresholds did not affect our ability to detect repeating earthquakes using the composite criterion. By applying our composite criterion to seismicity around the Raukumara Peninsula, we identified 62 repeating earthquake families occurring between 2003 and 2018, consisting of 160 individual earthquakes. These families have a magnitude range of MW 1.5–4.5, and have recurrence intervals and family durations of < 1–12 years. High-precision absolute and relative locations were calculated using manual phase picks and cross-correlation re-picking. Focal mechanisms for 56 of the families were also determined, using P-wave first motions, revealing predominantly strike-slip and normal faulting at shallow depths, low-angle reverse faulting along the subduction interface, and normal faulting in the subducting plate. We compared the timing of the repeating earthquakes to slow-slip events previously identified using geodetic measurements around the Raukumara Peninsula and observed that repeating earthquakes occurred during 26 of the 31 identified periods of slow-slip. We also compared the seismic moment– recurrence interval relationship of the Raukumara Peninsula repeating earthquakes to that of earthquakes near Parkfield, California, identified by Nadeau and Johnson (1998), and observed a similar functional relationship. Slip-rates of the Raukumara Peninsula repeating earthquake families were also calculated using a slip-rate–moment relationship and were found to vary from < 10mm/yr to 80mm/yr. We applied the method and composite criterion developed for the Raukumara Peninsula to two other locations to ensure it could be applied successfully in other New Zealand regions with different seismotectonic characteristics. Using our workflow, we successfully identified four families in Marlborough, and three families around Fiordland. These families differ from those identified around the Raukumara Peninsula in that they had relatively short recurrence intervals and family durations, of 2 minutes– 15 months. The ability of the composite criterion to identify these families confirms its suitability for further studies of repeating earthquakes throughout New Zealand.</p>

Repeating earthquakes and ground deformation reveal the structure and triggering mechanisms of the Pernicana fault, Mt. Etna

Structure and dynamics of fault systems can be investigated using repeating earthquakes as repeatable seismic sources, alongside ground deformation measurements. Here we utilise a dataset of repeating earthquakes which occurred between 2000 and 2019 along the transtensive Pernicana fault system on the northeast flank of Mount Etna, Italy, to investigate the fault structure, as well as the triggering mechanisms of the seismicity. By grouping the repeating earthquakes into families and integrating the seismic data with GPS measurements of ground deformation, we identify four distinct portions of the fault. Each portion shows a different behaviour in terms of seismicity, repeating earthquakes and ground deformation, which we attribute to structural differences including a segmentation of the fault plane at depth. The recurrence intervals of repeating earthquake families display a low degree of regularity which suggests an episodic triggering mechanism, such as magma intrusion, rather than displacement under a constant stress.

Low-Frequency Tremors Immediately After the 2011 Tohoku-Oki Earthquake Detected by Near-Trench OBS Observations

We used temporal seismic observation using pop-up type ocean-bottom seismometers to detect a number of low-frequency tremors (LFTs) immediately after the 2011 Tohoku-Oki earthquake in the northern periphery of its aftershock area. The near-field observation clearly distinguished LFTs from regular earthquakes based on their spectral shape in the frequency band of 1–4 Hz. In addition to the LFTs accompanied by known very low frequency earthquakes (VLFEs), more than 130 LFTs without known VLFE activity were detected during April–October, 2011. The newly detected LFTs were in the vicinity of a sequence of small repeating earthquakes indicating mixed distribution of LFTs and regular interplate earthquakes in the region. The LFTs and repeating earthquake activities show a periodicity of 60–100 days, which is similar to that of the LFT activity in the later period (2016–2018). This suggests that the LFT activity is modulated by sustained background aseismic slip events throughout the postseismic period of the 2011 mainshock.

Small repeating earthquake catalog for the Japanese Islands

Groups of repeating earthquakes, which occur in approximately the same location and possess a similar focal mechanism, have been extracted in various tectonic environments worldwide. Their recurrence interval has been used to estimate the spatiotemporal evolution of aseismic slip along major tectonic boundaries. Furthermore, slight changes between the waveforms of repeating earthquakes have been analyzed to delineate temporal changes in the local seismic velocity structure. Here we construct a long-term catalog of small repeating earthquakes throughout the Japanese Islands since 2001 (2001–2019) based on waveform similarity and relative source locations. Most of the long-duration sequences are located near the strongly coupled areas of the Philippine Sea and Pacific plates as they subduct from the Ryukyu-Nankai-Sagami and Kuril–Japan trenches, respectively. Many of the repeating sequences that occur in shallow crustal environments are short-lived. This repeating earthquake catalog allows us to estimate the slip history along each tectonic boundary. We believe that this and similar catalogs will be useful for future investigations of source processes, temporal slip and stress changes along faults, and local velocity structures, thereby providing new insights into earthquake generation mechanisms.