Comparative analysis of three categories of four-DOFs exoskeleton mechanism based on relative movement offsets

Purpose The purpose of this paper is to evaluate three categories of four-degrees of freedom (4-DOFs) upper limb rehabilitation exoskeleton mechanisms from the perspective of relative movement offsets between the upper limb and the exoskeleton, so as to provide reference for the selection of exoskeleton mechanism configurations. Design/methodology/approach According to the configuration synthesis and optimum principles of 4-DOFs upper limb exoskeleton mechanisms, three categories of exoskeletons compatible with upper limb were proposed. From the perspective of human exoskeleton closed chain, through reasonable decomposition and kinematic characteristics analysis of passive connective joints, the kinematic equations of three categories exoskeletons were established and inverse position solution method were addressed. Subsequently, three indexes, which can represent the relative movement offsets of human–exoskeleton were defined. Findings Based on the presented position solution and evaluation indexes, the joint displacements and relative movement offsets of the three exoskeletons during eating movement were compared, on which the kinematic characteristics were investigated. The results indicated that the second category of exoskeleton was more suitable for upper limb rehabilitation than the other two categories. Originality/value This paper has a certain reference value for the selection of the 4-DOFs upper extremity rehabilitation exoskeleton mechanism configurations. The selected exoskeleton can ensure the safety and comfort of stroke patients with upper limb dyskinesia during rehabilitation training.

The effects of using variable lengths for degraded signal acquisition in GPS receivers

The signal acquisition in GPS receivers is the first and very crucial process that may affect the overall performance of a navigation receiver. Acquisition program initiates a searching operation on received navigation signals to detect and identify the visible satellites. However, signal acquisition becomes a very challenging task in a degraded environment (i.e, dense urban) and the receiver may not be able to detect the satellites present in radio-vicinity, thus cannot estimate an accurate position solution. In such environments, satellite signals are attenuated and fluctuated due to fading introduced by Multipath and NLOS reception. To perform signal acquisition in such degraded environments, larger data accumulation can be effective in enhancing SNR, which tradeoff huge computational load, prolonged acquisition time and high cost of receiver. This paper highlights the effects of fading on satellite signal acquisition in GPS receiver through variable data lengths and SNR comparison, and then develops a statistical relationship between satellite visibility and SNR. Furthermore it also analyzes/investigates the tradeoff between computation load and signal data length.

Kinematic, Workspace and Force Analysis of a five-DOF Hybrid Manipulator R(2RPR)R/SP+RR

In the present study, the over-constrained hybrid manipulator R(2RPR)R/SP + RR is considered as the research objective. In this paper, kinematics of the hybrid manipulator, including the forward and inverse position, are analyzed. Then, the workspace is checked based on the inverse position solution to evaluate whether the workspace of the hybrid manipulator meets the requirements, and the actual workspace of the hybrid robot is analyzed. After that, the force analysis of the over-constrained parallel mechanism is carried out, and an ADAMS-ANSYS rigid-flexible hybrid body model is established to verify the simulation. Based on the obtained results from the force analysis, the manipulator structure is design. Then, the structure optimization is carried out to improve the robot stiffness. Finally, calibration and workspace verification experiments are performed on the prototype, cutting experiment of an S-shaped aluminum alloy workpiece is completed, and the experiment verifies the processing ability of the prototype and proves that the prototype has good application prospects.

INS Error Estimation Based on an ANFIS and Its Application in Complex and Covert Surroundings

Inertial navigation is a crucial part of vehicle navigation systems in complex and covert surroundings. To address the low accuracy of vehicle inertial navigation in multifaced and covert surroundings, in this study, we proposed an inertial navigation error estimation based on an adaptive neuro fuzzy inference system (ANFIS) which can quickly and accurately output the position error of a vehicle end-to-end. The new system was tested using both single-sequence and multi-sequence data collected from a vehicle by the KITTI dataset. The results were compared with an inertial navigation system (INS) position solution method, artificial neural networks (ANNs) method, and a long short-term memory (LSTM) method. Test results indicated that the accumulative position errors in single sequence and multi-sequences experiments decreased from 9.83% and 4.14% to 0.45% and 0.61% by using ANFIS, respectively, which were significantly less than those of the other three approaches. This result suggests that the ANFIS can considerably improve the positioning accuracy of inertial navigation, which has significance for vehicle inertial navigation in complex and covert surroundings.

Recovering authentic global position system L1 signals under spoofing using dual receiver direct positioning

Spoofing is a kind of deliberate interference that aims to manipulate global navigation satellite system (GNSS) receivers into counterfeit position solutions. Conventional anti-spoofing methods are implemented prior to the calculation of the position solution, depending on the specific spoofing attack mechanisms. The paper presents a spoofing detection and mitigation method implemented in the position domain. The proposed method projects the correlograms of the visible satellites to a position-clock bias domain to construct the position domain projected correlogram. P(Y) code signatures retrieved from a reference station receiver are used to identify the counterfeit position solution and remove it from the victim receiver. Compared with the conventional single-channel spoofing detection technique, the proposed anti-spoofing method is more robust against thermal noise by combining the energy from multiple satellites. Detailed mathematical derivation of the statistical characteristics of this method is presented. Its effectiveness is validated using a realistic dataset generated by a Spirent GNSS simulator and NordNav wideband front-end. Results show that the proposed algorithm is capable of not only detecting a spoofing attack but also removing the spoofing effect from the victim receiver.

Potential and limitations of processing smartphone GNSS raw observation data in PPP

<p>Since the release of Android 7.0 in 2016, raw GNSS measurements tracked by smartphones operating with Android can be accessed. Before this date, solely the position solution of the smartphone's internal "black box" algorithm could be further processed in various applications. Now the smartphone's GNSS observations can be used directly to estimate the user position with specialized self-developed algorithms and correction data. Since smartphones are equipped with simple, cost-effective GNSS chips and antennas, they provide challenging, low-quality GNSS measurements. Furthermore, most smartphones on the market offer GNSS measurements on just one frequency. </p><p>Precise Point Positioning (PPP) is one of the most promising processing techniques for Global Navigation Satellite System (GNSS) data. PPP is characterized by the use of precise satellite products (orbits, clocks, and biases) and the application of sophisticated algorithms to estimate the user's position. In contrast to relative positioning methods, PPP does not rely on nearby reference stations or a regional reference network. Furthermore, the concept of PPP is very flexible, which is another advantage considering the challenging nature of (single frequency) GNSS measurements from smartphones.</p><p>In this contribution, we present PPP results applying the uncombined model on raw GNSS observations from various smartphone devices. In contrast to the typical use of the ionosphere-free linear combination for PPP, this flexible PPP model applies the raw GNSS observation equations, is suitable for any number of frequencies, and allows the utilization of ionosphere models as an ionospheric constraint. We explore the potential and limitations of using raw GNSS observations from smartphones for PPP to reach a position accuracy at the decimeter level. Therefore, we test different correction data types and algorithms and examine diverse ways to handle the tropospheric and ionospheric delay. The PPP calculations are performed with our self-developed in-house software raPPPid.</p>

The Effect of the Optimization Selection of Position Analysis Route on the Forward Position Solutions of Parallel Mechanisms

The forward position solution (FPS) of any complex parallel mechanism (PM) can be solved through solving in sequence all of the independent loops contained in the PM. Therefore, when solving the positions of a PM, all independent loops, especially the first loop, must be correctly selected. The optimization selection criterion of the position analysis route (PAR) proposed for the FPS is presented in this paper, which can not only make kinematics modeling and solving efficient but also make it easy to get its symbolic position solutions. Two three-translation PMs are used as the examples to illustrate the optimization selection of their PARs and obtain their symbolic position solutions.