power split
Recently Published Documents


TOTAL DOCUMENTS

670
(FIVE YEARS 198)

H-INDEX

36
(FIVE YEARS 8)

Author(s):  
Hui Liu ◽  
Xunming Li ◽  
Lijin Han ◽  
Weida Wang ◽  
Changle Xiang

With the continuous development of hybrid vehicle control technology, great progress has been made in the research of multi-power flow collaborative control. Due to the internal delay link of each power component, the role of energy storage element, and the limitation of electric power in the whole system, the inevitable delay characteristic of state transfer is caused. Therefore, the speed of multi-power flow control torque coordinated response of hybrid vehicles needs to be improved. The dual-mode power-split hybrid electric vehicle (DMPS-HEV) overall structure and working modes are analyzed, by adopting the combination of theory and experiment method. In order to solve the problem that the power components of dual-mode power-split hybrid electric vehicle cannot follow the optimal control command of the upper energy management strategy quickly due to the engine response delay, thus affecting the control effect of the upper energy management strategy. The research on torque coordination control strategy is carried out, the reference model of electromechanical composite drive is established, and the model reference adaptive coordination control strategy based on Lyapunov stability theory is proposed. The results show that the proposed model reference adaptive torque coordinated control strategy significantly improves the effect of engine response delay on the optimization effect of energy management strategy, and can achieve the control effect of the optimal control strategy of 93.58%. The test platform of the dual-mode power-split hybrid electric vehicle was built. The control system was built based on the rapid control prototype, and the data acquisition system was built based on the NI data acquisition module. The coordinated control strategy of the dual-mode power-split hybrid electric vehicle power system proposed in this paper was verified through the bench test to significantly improve the vehicle fuel economy and the real-time performance of the control strategy, which has a good practical value


Author(s):  
Muhammad Zahid ◽  
Naseer Ahmad

To fulfil future demand for energy and to control pollution, a power-split hybrid electric vehicle is a promising solution combining attributes of a conventional vehicle and an electric vehicle. Since energy is available from two subsystems i.e, engine and battery, there is the freedom to manage it optimally. In this work, model predictive control strategy, that has the constraint handling which makes it a better choice over other strategies for efficient energy management of hybrid electric vehicles. A detailed mathematical model of the power split configured hybrid electric vehicle is developed that encompasses the engine, planetary gear, motor/generator, inverter, and battery. An interior-point optimizer based-nonlinear model predictive control strategy is applied to the developed model by incorporation of operational constraints and cost function. The objective is to curtail fuel consumption while the battery’s state of charge should be maintained within predefined limits. The complete developed model was simulated in MATLAB for motor, generator, engine speed, and battery SoC. Computed specific fuel consumption from the proposed MPC during the NEDC and the HWFET cycles are 4.356liters/100km and 2.474 litres/100 km, respectively. These findings are validated by the rule-based strategy of ADVISOR 2003 that provides 4.900 litres/100 km and 3.600 litres/100 km over the NEDC and the HWFET cycles, respectively. This indicates that the proposed MPC shows 11.11 % and 31.26 % improvement in specific fuel consumption in the NEDC and HWFET drive cycles respectively.


2021 ◽  
Vol 44 ◽  
pp. 103341
Author(s):  
Qian Xun ◽  
Vicente Roda ◽  
Yujing Liu ◽  
Xiaoliang Huang ◽  
Ramon Costa-Castelló

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7505
Author(s):  
Jinghua Zhao ◽  
Yunfeng Hu ◽  
Fangxi Xie ◽  
Xiaoping Li ◽  
Yao Sun ◽  
...  

To simultaneously achieve high fuel efficiency and low emissions in a diesel hybrid electric vehicle (DHEV), it is necessary to optimize not only power split but also exhaust thermal management for emission aftertreatment systems. However, how to coordinate the power split and the exhaust thermal management to balance fuel economy improvement and emissions reduction remains a formidable challenge. In this paper, a hierarchical model predictive control (MPC) framework is proposed to coordinate the power split and the exhaust thermal management. The method consists of two parts: a fuel and thermal optimized controller (FTOC) combining the rule-based and the optimization-based methods for power split simultaneously considering fuel consumption and exhaust temperature, and a fuel post-injection thermal controller (FPTC) for exhaust thermal management with a separate fuel injection system added to the exhaust pipe. Additionally, preview information about the road grade is introduced to improve the power split by a fuel and thermal on slope forecast optimized controller (FTSFOC). Simulation results show that the hierarchical method (FTOC + FPTC) can reach the optimal exhaust temperature nearly 40 s earlier, and its total fuel consumption is also reduced by 8.9%, as compared to the sequential method under a world light test cycle (WLTC) driving cycle. Moreover, the total fuel consumption of the FTSFOC is reduced by 5.2%, as compared to the fuel and thermal on sensor-information optimized controller (FTSOC) working with real-time road grade information.


Author(s):  
Seyedeh Mahsa Sotoudeh ◽  
Baisravan HomChaudhuri

Abstract This paper focuses on an eco-driving based hierarchical robust energy management strategy for connected automated HEVs in the presence of uncertainty. The proposed control strategy includes a velocity optimizer, which evaluates the optimal vehicle velocity, and a powertrain energy manager, which evaluates the optimal power split between the engine and the battery in a hierarchical framework. The velocity optimizer accounts for regenerative braking and minimizes the total driving power and friction braking over a short control horizon. The hierarchical powertrain energy manager employs a long- and short-term strategy where it first approximately solves its problem over a long time horizon (the whole trip time in this paper) using the traffic data obtained from vehicle-to-infrastructure (V2I) connectivity. This is followed by a short-term decision maker that utilizes the velocity optimizer and long-term solution, and solves the energy management problem over a relatively short time horizon using robust prediction control methods to factor in any uncertainty in the velocity profile due to uncertain traffic. We solve the long-term energy management problem using pseudospectral optimal control method, and the short-term problem using robust tube-based model predictive control(MPC) method. Simulation results show the competence of our proposed approach, where our proposed co-optimization approach with long- and short-term solution results in ≈ 12% more energy efficiency than a baseline co-optimization approach.


2021 ◽  
Vol 302 ◽  
pp. 117525
Author(s):  
Antonio García ◽  
Paolo Carlucci ◽  
Javier Monsalve-Serrano ◽  
Andrea Valletta ◽  
Santiago Martínez-Boggio

Sign in / Sign up

Export Citation Format

Share Document