Mechanical and Dynamic Mechanical Properties of the Amino Silicone Oil Emulsion Modified Ramie Fiber Reinforced Composites

The mechanical and dynamic mechanical properties, interface adhesion and microstructures of the amino silicone oil emulsion (ASO) modified short ramie fiber reinforced polypropylene composites (RFPCs) with different fiber fractions were investigated. The RFPCs were made through a combined process of extrusion and injection molding. Mechanical property tests of the RFPCs revealed enhancements in tensile and flexural strengths with increase of the fiber fraction due to the high stiffness of the fiber filler and a better interfacial bonding from ASO treatment. The dynamic mechanical analysis (DMA) results indicated that fiber incorporation plays an important role in DMA parameters (storage modulus, loss modulus, and damping ratio) at Tg by forming an improved interfacial adhesion and providing more effective stress transfer rate and energy dissipation between matrix and fiber. The phase behavior analysis suggests all the RFPCs are a kind of heterogeneity system based on the Cole-Cole plot analysis.

Synthesis and Properties of Linear Polyether-Blocked Amino Silicone-Modified Cationic Waterborne Polyurethane

In this study, a waterborne polyurethane (WPU) is synthesized by using polytetramethylene ether glycol (PTMEG) to form the soft segment, 1,4-butanediol (BDO) as the chain extender, n-methyldiethanolamine (MDEA) as a hydrophilic chain extender, and isophorone diisocyanate (IPDI) to form the hard segment. Furthermore, the modified cationic WPU emulsion and its films are created through a reaction between the WPU and a linear polyether-blocked amino silicone (LEPS), which is an organosilicon compound that imparts flexibility. The properties of the structure and formed WPU films are then characterized by using Fourier transform infrared spectrometry, a thermogravimetric analysis, atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy, as well as by measuring the water contact angle, testing the water absorption, etc. It is found that, with an increase in the LEPS content in the WPU, the particle size of the modified WPU emulsion is increased, the WPU films are more flexible, and the resistance of the modified WPU films to heat and water are increased, while the crystallinity is reduced. The polysiloxane chain segment, which is added to the LEPS-modified WPU emulsion, is significantly enriched on the surface of the modified WPU films, while there are no adverse effects of the LEPS-modified WPU emulsion on the adhesive force between the WPU and substrate. When the LEPS content of the WPU is 14.0 wt%, the modified WPU emulsion and film provide the best performance.