Experiment and numerical simulation of the combined effect of winding, cool-down, and screening current induced stresses in REBCO coils

This paper overviews the combined effect of winding, cool-down, and screening current-induced stresses in REBCO coils. First, a simulation method to model the circumferential stress modification effect due to the screening-current is overviewed. The simulation includes coil winding, cooling down, and coil charge up to the operating current. Second, we will compare the numerical simulation results with the experimental results. The numerical simulations for a dry coil and an epoxy impregnated coil agree well with the experimental results. Third, the enhanced circumferential stress did not degrade the performance of a dry winding REBCO coil, but. the improved increased compressive stress buckled the coil structure. Finally, it is demonstrated that epoxy impregnation has beneficial effects in reducing the stress modification effect. However, the circumferential stress is enormously enhanced at the coil ends, sometimes resulting in degradation of the coil performance.

A New Purification Process of Solanesol Based on Chemically Modified Diatomite

Diatomite is a kind of natural material with adsorption capacity and it’s widely used in industry. The main purpose of this paper is to study the influence of hydrochloric acid concentration and modification time on the modification effect of diatomite. This article describes a modified method of diatomite, which can not only reduce the purification cost, but also improve the separation efficiency of solanesol. The results show that when the concentration of hydrochloric acid is 3mol/L and the treatment time is 50 minutes, the modification effect of diatomite is the best. The determination of the optimum technological conditions is conducive to the separation and purification of Solanesol by diatomite, and lays a foundation for the further development and utilization of diatomite.

Influence of Rubber Powder Modification Methods on the Mechanical and Durability Properties of Rubberized Magnesium Oxychloride Cement

In the present study, three modification methods, including water washing, sodium hydroxide (NaOH), and styrene–acrylic emulsion, were used to modify waste rubber powders. The influence of rubber powders on the mechanical properties and frost resistance of magnesium oxychloride cement was examined, and the different modification mechanisms were also analyzed. Based on the analysis of hydrophilic properties after modification, styrene–acrylic emulsion achieved the best modification effect, while water washing produced the least modification effect; regarding mechanical properties, magnesium oxychloride cement mixed with NaOH modified rubber powders achieved the best modification effect, in which the 28 d flexural strength and compressive strength increased by 41.2% and 59.6%, respectively. During the freeze-thaw cycles, the mass loss of specimens was reduced with an increase in the content of rubber powders. In addition, after 300 cycles, the relative dynamic modulus of elasticity of the blank sample was about 28.12%, while that of the magnesium oxychloride cement mixed with NaOH modified rubber powders was approximately 42.38%. In general, the properties of the modified rubber powder–magnesium oxychloride cement composite material can meet the requirements for engineering materials, which provides a theoretical basis and technical support for the application of rubberized magnesium oxychloride cement.

Modification effect of ideal cardiovascular health metrics on genetic association with incident heart failure in the China Kadoorie Biobank and the UK Biobank

Background Both genetic and cardiovascular factors contribute to the risk of developing heart failure (HF), but whether idea cardiovascular health metrics (ICVHMs) offset the genetic association with incident HF remains unclear. Objectives To investigate the genetic association with incident HF as well as the modification effect of ICVHMs on such genetic association in Chinese and British populations. Methods An ICVHMs based on smoking, drinking, physical activity, diets, body mass index, waist circumference, blood pressure, blood glucose, and blood lipids, and a polygenic risk score (PRS) for HF were constructed in the China Kadoorie Biobank (CKB) of 96,014 participants and UK Biobank (UKB) of 335,782 participants which were free from HF and severe chronic diseases at baseline. Results During the median follow-up of 11.38 and 8.73 years, 1451 and 3169 incident HF events were documented in CKB and UKB, respectively. HF risk increased monotonically with the increase of PRS per standard deviation (CKB: hazard ratio [HR], 1.19; 95% confidence interval [CI], 1.07, 1.32; UKB: 1.07; 1.03, 1.11; P for trend < 0.001). Each point increase in ICVHMs was associated with 15% and 20% lower risk of incident HF in CKB (0.85; 0.81, 0.90) and UKB (0.80; 0.77, 0.82), respectively. Compared with unfavorable ICVHMs, favorable ICVHMs was associated with a lower HF risk, with 0.71 (0.44, 1.15), 0.41 (0.22, 0.77), and 0.48 (0.30, 0.77) in the low, intermediate, and high genetic risk in CKB and 0.34 (0.26, 0.44), 0.32 (0.25, 0.41), and 0.37 (0.28, 0.47) in UKB (P for multiplicative interaction > 0.05). Participants with low genetic risk and favorable ICVHMs, as compared with high genetic risk and unfavorable ICVHMs, had 56~72% lower risk of HF (CKB 0.44; 0.28, 0.70; UKB 0.28; 0.22, 0.37). No additive interaction between PRS and ICVHMs was observed (relative excess risk due to interaction was 0.05 [−0.22, 0.33] in CKB and 0.04 [−0.14, 0.22] in UKB). Conclusions In CKB and UKB, genetic risk and ICVHMs were independently associated with the risk of incident HF, which suggested that adherence to favorable cardiovascular health status was associated with a lower HF risk among participants with all gradients of genetic risk.