2013 ◽  
pp. 532-538 ◽  
Author(s):  
Muhammad Kadwa ◽  
Carel N Bezuidenhout

The Eston Sugar Mill is the newest in the South African KwaZulu-Natal sugar belt. Like most other mills, it can be argued that there are inefficiencies in the supply chain due to systematic issues, which reduce optimum performance. It was alleged that mill processes are slowed, or stopped, on Sundays, Mondays, as well as some Tuesdays and Wednesdays, due to pay-weekends, because of the associated cutter absenteeism. This increases the length of the milling season (LOMS), increases milling costs and reduces the average cane quality for the season. Data on cane deliveries to the Eston Mill, over a period of five seasons, were analysed to study the magnitude of the problem. It was statistically verified that cane shortages occur immediately after payweekends and it was conservatively estimated that cutter absenteeism occurs between 25–29 days per season, which increases the LOMS by six to ten days. The associated cost of this problem equated to an average of US$159,500 (approximately EUR120,000) per milling season. In this paper, an alternative harvesting system scenario is suggested, assuming that mechanical harvesters be used after a pay-weekend, to mitigate the impacts of cutter shortages. However, the solution is calculated to be risky. When the cost of new equipment was considered, only two of the five seasons were able to justify the associated costs.


2019 ◽  
Vol 11 (6) ◽  
pp. 1782 ◽  
Author(s):  
Jacek Szulej ◽  
Paweł Ogrodnik ◽  
Beata Klimek

The article presents the results of research on the use of ceramic ware waste as aggregate in concrete production. Four concrete mixtures with aluminous cement were prepared, each with a different admixture of clinoptilolite. The only used aggregate was crushed waste ceramic sanitary ware obtained from a Polish sanitary fixture production plant. As part of the studies, a compressive test of cubic samples at different curing times ranging from 7 to 90 days was performed. Prior to the preparation of the samples, a sieve analysis and an elemental analysis of the obtained aggregate were conducted. In the framework of the testing, the bimodal distribution of clinoptilolite grains was determined, as well as its chemical composition. The conducted compressive tests demonstrated high strength of concrete containing ceramic aggregate and aluminous cement with an addition of clinoptilolite. In order to determine the impact that adding zeolite exerts on the phase composition and the structure of concrete samples, an analysis of the phase composition (XRD) and scanning electron microscopy examination (SEM) were performed. Furthermore, tests of abrasion, water penetration under pressure and frost resistance were conducted, determining particular properties of the designed mixtures. The abrasion tests have confirmed that the mixtures are highly abrasion-resistant and can be used as a topcoat concrete layer. The conducted tests of selected properties have confirmed the possibility of using waste ceramic cullet and a mineral addition of clinoptilolite in concrete production.


Sign in / Sign up

Export Citation Format

Share Document