Water-Dispersible Phytosterol Nanoparticles: Preparation, Characterization, and in vitro Digestion

For improving solubility and bioaccessibility of phytosterols (PS), phytosterol nanoparticles (PNPs) were prepared by emulsification–evaporation combined high-pressure homogenization method. The organic phase was formed with the dissolved PS and soybean lecithin (SL) in anhydrous ethanol, then mixed with soy protein isolate (SPI) solution, and homogenized into nanoparticles, followed by the evaporation of ethanol. The optimum fabrication conditions were determined as PS (1%, w/v): SL of 1:4, SPI content of 0.75% (w/v), and ethanol volume of 16 ml. PNPs were characterized to have average particle size 93.35 nm, polydispersity index (PDI) 0.179, zeta potential −29.3 mV, and encapsulation efficiency (EE) 97.3%. The impact of temperature, pH, and ionic strength on the stability of fabricated PNPs was determined. After 3-h in vitro digestion, the bioaccessibility of PS in nanoparticles reached 70.8%, significantly higher than the 18.2% of raw PS. Upon freeze-drying, the particle size of PNPs increased to 199.1 nm, resulting in a bimodal distribution. The solubility of PS in water could reach up to 2.122 mg/ml, ~155 times higher than that of raw PS. Therefore, this study contributes to the development of functional PS-food ingredients.

GC content of plant genes is linked to past gene duplications

The frequency of G and C nucleotides in genomes varies from species to species, and sometimes even between different genes in the same genome. The monocot grasses have a bimodal distribution of genic GC content absent in dicots. We categorized plant genes from 5 dicots and 4 monocot grasses by synteny to related species and determined that syntenic genes have significantly higher GC content than non-syntenic genes at their 5`-end in the third position within codons for all 9 species. Lower GC content is correlated with gene duplication, as lack of synteny to distantly related genomes is associated with past interspersed gene duplications. Two mutation types can account for biased GC content, mutation of methylated C to T and gene conversion from A to G. Gene conversion involves non-reciprocal exchanges between homologous alleles and is not detectable when the alleles are identical or heterozygous for presence-absence variation, both likely situations for genes duplicated to new loci. Gene duplication can cause production of siRNA which can induce targeted methylation, elevating mC→T mutations. Recently duplicated plant genes are more frequently methylated and less likely to undergo gene conversion, each of these factors synergistically creating a mutational environment favoring AT nucleotides. The syntenic genes with high GC content in the grasses compose a subset that have undergone few duplications, or for which duplicate copies were purged by selection. We propose a “biased gene duplication / biased mutation” (BDBM) model that may explain the origin and trajectory of the observed link between duplication and genic GC bias. The BDBM model is supported by empirical data based on joint analyses of 9 angiosperm species with their genes categorized by duplication status, GC content, methylation levels and functional classes.

A bimodal distribution of haze in Pluto’s atmosphere

Pluto, Titan, and Triton make up a unique class of solar system bodies, with icy surfaces and chemically reducing atmospheres rich in organic photochemistry and haze formation. Hazes play important roles in these atmospheres, with physical and chemical processes highly dependent on particle sizes, but the haze size distribution in reducing atmospheres is currently poorly understood. Here we report observational evidence that Pluto’s haze particles are bimodally distributed, which successfully reproduces the full phase scattering observations from New Horizons. Combined with previous simulations of Titan’s haze, this result suggests that haze particles in reducing atmospheres undergo rapid shape change near pressure levels ~0.5 Pa and favors a photochemical rather than a dynamical origin for the formation of Titan’s detached haze. It also demonstrates that both oxidizing and reducing atmospheres can produce multi-modal hazes, and encourages reanalysis of observations of hazes on Titan and Triton.

Anaerobic Digestion of the Organic Fraction of Municipal Solid Waste in Plug-Flow Reactors: Focus on Bacterial Community Metabolic Pathways

The aim of this study is to investigate the performance of a pilot-scale plug-flow reactor (PFR) as a biorefinery system to recover chemicals (i.e., volatile fatty acids (VFAs)), and biogas during the dry thermophilic anaerobic digestion (AD) of the organic fraction of municipal solid waste (OFMSW). The effects of the hydraulic retention time (HRT) on both outputs were studied, reducing the parameter from 22 to 16 days. In addition, VFA variation along the PFR was also evaluated to identify a section for a further valorization of VFA-rich digestate stream. A particular focus was dedicated for characterizing the community responsible for the production of VFAs during hydrolysis and acidogenesis. The VFA concentration reached 4421.8 mg/L in a section located before the end of the PFR when the HRT was set to 16 days. Meanwhile, biogas production achieved 145 NLbiogas/d, increasing 2.7 times when compared to the lowest HRT tested. Defluviitoga sp. was the most abundant bacterial genus, contributing to 72.7% of the overall bacterial population. The genus is responsible for the hydrolysis of complex polysaccharides at the inlet and outlet sections since a bimodal distribution of the genus was found. The central zone of the reactor was distinctly characterized by protein degradation, following the same trend of propionate production.

White-matter degradation and dynamical compensation support age-related functional alterations in human brain

Structural connectivity of the brain at different ages is analyzed using diffusion-weighted Magnetic Resonance Imaging (MRI) data. The largest decrease of the number and average length of stream- lines is found for the long inter-hemispheric links, with the strongest impact for frontal regions. From the BOLD functional MRI (fMRI) time series we identify age-related changes of dynamic functional connectivity (dFC) and spatial covariation features of the FC links captured by meta- connectivity (MC). They indicate more constant dFC, but wider range and variance of MC. Finally we applied computational whole-brain network model based on oscillators, which mechanistically expresses the impact of the spatio-temporal structure of the brain (weights and the delays) to the dynamics. With this we tested several hypothesis, which revealed that the spatio-temporal reorga- nization of the brain with ageing, supports the observed functional fingerprints only if the model accounts for: (i) compensation of the individual brains for the overall loss of structural connectivity, and (ii) decrease of propagation velocity due to the loss of myelination. We also show that having these two conditions, it is sufficient to decompose the time-delays as bimodal distribution that only distinguishes between intra- and inter-hemispheric delays, and that the same working point also captures the static FC the best.

The Effect of Vanadium Content Coupling with Heat Treatment Process on the Properties of Low-Vanadium Wear-Resistant Alloy

The development of wear-resistant materials with excellent properties is of great research value in the manufacturing industry. In this paper, a new kind of low-vanadium wear-resistant alloy was designed and characterized to unveil the influence of vanadium content coupling with heat treatment on the microstructure, hardness, and abrasive wear property. The performances of commercial high chromium cast iron (HCCI) and the new low-vanadium wear-resistant alloy are compared. The alloy with 3 wt.% vanadium quenched at 900 °C and tempered at 250 °C, possessing VC, Mo2C, and M7C3 distributed in the martensite matrix, displayed a wear resistance two times better than the HCCI. The results showed that the increase of vanadium content from 0.98 wt.% to 3.00 wt.% resulted in a decrease in the size of M7C3 and a more homogeneous distribution of M7C3. VC with a bimodal distribution is effective for impeding grooving or indenting by abrasives because of their high hardness, which plays a vital role in improving the wear resistance of low-vanadium wear-resistant alloy.

Synthesis and characterization of novel thermo- and salt-sensitive amphoteric terpolymers based on acrylamide derivatives

A novel linear amphoteric terpolymers based on neutral monomer — N-isopropylacrylamide (NIPAM), ani- onic monomer — 2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPS), and cationic mono- mer — (3-acrylamidopropyl) trimethylammonium chloride (APTAC) were synthesized by free-radical polymerization in aqueous solution and characterized by methods of 1H NMR and FTIR spectroscopy, TGA, GPC, Dynamic light scattering (DLS) and zeta-potential. The thermal and salt sensitivity of amphoteric ternary polymers of various compositions, particularly, [NIPAM]:[AMPS]:[APTAC] = 90:2.5:7.5; 90:5:5; 90:7.5:2.5 mol.% were studied in aqueous and aqueous-salt solutions in the temperature range from 25 to 60 C and at the NaCl ionic strength  interval from 10–3 to 1M. It was found that due to hydrophobic/hydrophilic balance, the temperature dependent conformational and phase change of macromolecular chains becomes sensitive to salt addition and allows the fine-tuning of the phase transition. In aqueous and aqueous-salt solutions, the average hydrodynamic size of amphoteric terpolymers is varied from 8 to 300 nm exhibiting bimodal distribution at room temperature. The number average (Mn) and weight average (Mw) molecular weights, polydispersity index (PDI), and zeta-potentials of amphoteric terpolymers in aqueous solu- tions were determined

Predicting the Water Content of Interstellar Objects from Galactic Star Formation Histories

Planetesimals inevitably bear the signatures of their natal environment, preserving in their composition a record of the metallicity of their system’s original gas and dust, albeit one altered by the formation processes. When planetesimals are dispersed from their system of origin, this record is carried with them. As each star is likely to contribute at least 1012 interstellar objects (ISOs), the Galaxy’s drifting population of ISOs provides an overview of the properties of its stellar population through time. Using the EAGLE cosmological simulations and models of protoplanetary formation, our modeling predicts an ISO population with a bimodal distribution in their water mass fraction: objects formed in low-metallicity, typically older, systems have a higher water fraction than their counterparts formed in high-metallicity protoplanetary disks, and these water-rich objects comprise the majority of the population. Both detected ISOs seem to belong to the lower water fraction population; these results suggest they come from recently formed systems. We show that the population of ISOs in galaxies with different star formation histories will have different proportions of objects with high and low water fractions. This work suggests that it is possible that the upcoming Vera C. Rubin Observatory Legacy Survey of Space and Time will detect a large enough population of ISOs to place useful constraints on models of protoplanetary disks, as well as galactic structure and evolution.

Effect of microencapsulated chavil (Ferulago angulata) extract on physicochemical, microbiological, textural and sensorial properties of UF-feta-type cheese during storage time

Chavil (Ferulago angulata) extract (CE) and microencapsulated chavil extract (MCE) were added to UF- Feta-type Cheese. The aim of this study was to comprising CE and MCE on physicochemical and microbiological properties in cheese. The scanning electron microscope images demonstrate the MCE had elliptical shape. The average size diameter curve of the MCE revealed bimodal distribution with two peaks (1541 and 2222 nm) separately. The hardness value of MCE cheese (212.83 ± 17.63 g) was lower than that of CE (343.67 ± 25.53 g) because of canola oil used in the microencapsulation process. The MCE-cheese showed lower values of acidity (1.67%) in comparison with CE-cheese (1.87%). The viable numbers of Streptococcus thermophilus and Lactococcus lactis were equal among the samples (4.6–4.9 log10 CFU/g respectively). The acid degree value of MCE (2.07 ± 0.21%) and CE (1.83 ± 0.25%) cheese were nearly equal at the end of storage time.

Drug-Induced Phase Separation in Polyelectrolyte Microgels

Polyelectrolyte microgels may undergo volume phase transition upon loading and the release of amphiphilic molecules, a process important in drug delivery. The new phase is “born” in the outermost gel layers, whereby it grows inward as a shell with a sharp boundary to the “mother” phase (core). The swelling and collapse transitions have previously been studied with microgels in large solution volumes, where they go to completion. Our hypothesis is that the boundary between core and shell is stabilized by thermodynamic factors, and thus that collapsed and swollen phases should be able to also coexist at equilibrium. We investigated the interaction between sodium polyacrylate (PA) microgel networks (diameter: 400–850 µm) and the amphiphilic drug amitriptyline hydrochloride (AMT) in the presence of NaCl/phosphate buffer of ionic strength (I) 10 and 155 mM. We used a specially constructed microscopy cell and micromanipulators to study the size and internal morphology of single microgels equilibrated in small liquid volumes of AMT solution. To probe the distribution of AMT micelles we used the fluorescent probe rhodamine B. The amount of AMT in the microgel was determined by a spectrophotometric technique. In separate experiments we studied the binding of AMT and the distribution between different microgels in a suspension. We found that collapsed, AMT-rich, and swollen AMT-lean phases coexisted in equilibrium or as long-lived metastable states at intermediate drug loading levels. In single microgels at I = 10 mM, the collapsed phase formed after loading deviated from the core-shell configuration by forming either discrete domains near the gel boundary or a calotte shaped domain. At I = 155 mM, single microgels, initially fully collapsed, displayed a swollen shell and a collapsed core after partial release of the AMT load. Suspensions displayed a bimodal distribution of swollen and collapsed microgels. The results support the hypothesis that the boundary between collapsed and swollen phases in the same microgel is stabilized by thermodynamic factors.