Low-temperature plasma processing for the enhancement of surface properties and dyeability of wool fabric

2015 ◽  
Vol 133 (12) ◽  
pp. n/a-n/a ◽  
Author(s):  
Pankaj Mendhe ◽  
Gauree Arolkar ◽  
Sanjeev Shukla ◽  
Rajendra Deshmukh
2020 ◽  
Vol 6 ◽  
pp. 40-55
Author(s):  
N.M. Ivanova ◽  
◽  
E.O. Filippova ◽  
A.N. Aleinik ◽  
V.F. Pichugin ◽  
...  

Effects of the low-temperature plasma exposure, γ-irradiation, and joint g-irradiation and plasma exposure on the structure and surface properties of thin films based on polylactic acid (PLA) have been investigated. Films were obtained by the method a solvent-casting. It has been shown that films based on polylactic acid have topographically different sides: a smoother inner side and embossed outer one. PLA films have properties close to those hydrophobic, with a contact angle in the range of 70°-73° regardless of the surface side and belong to a weakly polar materials. The combined effect of plasma and gamma radiation slightly changes the surface topography. The effect of low-temperature plasma on the surface of the films leads to a decrease in the contact angle by 13°-55° (9-11%) and an increase in surface energy due to the polar component. The results of in vivo experiments on rabbits are presented. Biomicroscopy, optical coherence tomography, morphological and electron microscopic examination of the cornea after implantation of initial and radiation and plasma treated films showed that implantation of the films in the anterior chamber is not accompanied by a pronounced inflammatory reaction and increased intraocular pressure, while maintaining the morphological structure of the cornea almost unchanged.


2011 ◽  
Vol 331 ◽  
pp. 338-341 ◽  
Author(s):  
Yan Li Qiao ◽  
Wen Fang Yang ◽  
Qing Fu Zhang ◽  
Xiao Xing Shen

This paper discussed the influences of plasma processing time and power on wool fibers, the results showed that: after plasma treatment, the surface of the wool fibers occurred varying degrees of physical and chemical etching phenomenon, the wetting property was increased significantly, anti-shrinkage performance was improved. Breaking strength and elongation at fracture were increased; the beginning of dyeing properties and the balance rate were increased.


2020 ◽  
Vol 29 (4) ◽  
pp. 2612-2622
Author(s):  
Yamid E. Núñez de la Rosa ◽  
Oriana Palma Calabokis ◽  
Paulo César Borges ◽  
Vladimir Ballesteros Ballesteros

2016 ◽  
Vol 7 (5) ◽  
pp. 664-672 ◽  
Author(s):  
E. O. Filippova ◽  
D. A. Karpov ◽  
A. V. Gradoboev ◽  
V. V. Sokhoreva ◽  
V. F. Pichugin

Sign in / Sign up

Export Citation Format

Share Document