Heat transfer in dusty fluid with suspended hybrid nanoparticles over a melting surface

Heat Transfer ◽  
2020 ◽  
Author(s):  
M. Radhika ◽  
R. J. Punith Gowda ◽  
R. Naveenkumar ◽  
Siddabasappa ◽  
B. C. Prasannakumara
Keyword(s):  
Heat Transfer ◽  
Hybrid Nanoparticles ◽  
Dusty Fluid ◽  
Melting Surface

scholarly journals Heat Transmission Reinforcers Induced by MHD Hybrid Nanoparticles for Water/Water-EG Flowing over a Cylinder

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 623
Author(s):  
Firas A. Alwawi ◽  
Mohammed Z. Swalmeh ◽  
Amjad S. Qazaq ◽  
Ruwaidiah Idris
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Liquid Velocity ◽  
Flow Characteristics ◽  
Hybrid Nanoparticles ◽  
Critical Parameters ◽  
Heat Transmission ◽  
Constant Wall Temperature

The assumptions that form our focus in this study are water or water-ethylene glycol flowing around a horizontal cylinder, containing hybrid nanoparticles, affected by a magnetic force, and under a constant wall temperature, in addition to considering free convection. The Tiwari–Das model is employed to highlight the influence of the nanoparticles volume fraction on the flow characteristics. A numerical approximate technique called the Keller box method is implemented to obtain a solution to the physical model. The effects of some critical parameters related to heat transmission are also graphically examined and analyzed. The increase in the nanoparticle volume fraction increases the heat transfer rate and liquid velocity; the strength of the magnetic field has an adverse effect on liquid velocity, heat transfer, and skin friction. We find that cobalt nanoparticles provide more efficient support for the heat transfer rate of aluminum oxide than aluminum nanoparticles.

scholarly journals Experimental Investigation of Thermo-Physical Properties of Tri-Hybrid Nanoparticles in Water-Ethylene Glycol Mixture

2021 ◽  
Vol 18 (8) ◽  
Author(s):  
Anwar Ilmar RAMADHAN ◽  
Wan Hamzah AZMI ◽  
Rizalman MAMAT
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ethylene Glycol ◽  
Physical Properties ◽  
Dynamic Viscosity ◽  
Volume Concentration ◽  
Hybrid Nanoparticles ◽  
Maximum Enhancement ◽  
Hybrid Nanofluids ◽  
Thermo Physical Properties

In recent years, research has focused on enhancing the thermo-physical properties of a single component nanofluid. Therefore, hybrid or composite nanofluids have been developed to improve heat transfer performance. The thermo-physical properties of the Al2O3-TiO2-SiO2 nanoparticles suspended in a base of water (W) and ethylene glycol (EG) at constant volume ratio of 60:40 and different volume concentrations were investigated. The experiment was conducted for the volume concentrations of 0.05, 0.1, 0.2, and 0.3% of Al2O3-TiO2-SiO2 nanofluids at different temperatures of 30, 40, 50, 60, and 70 °C. Thermal conductivity and dynamic viscosity measurements were carried out at temperatures ranging from 30 to 70 °C by using KD2 Pro Thermal Properties Analyzer and Brookfield LVDV III Ultra Rheometer, respectively. The highest thermal conductivity for tri-hybrid nanofluids was obtained at 0.3% volume concentration, and the maximum enhancement was increased up to 9% higher than the base fluid (EG/W). Tri-hybrid nanofluids with a volume concentration of 0.05% gave the lowest effective thermal conductivity of 4.8 % at 70 °C temperature. Meanwhile, the dynamic viscosity of the tri-hybrid nanofluids was influenced by volume concentration and temperature. Furthermore, tri-hybrid nanofluids behaved as a Newtonian fluid for volume concentrations from 0.05 to 3.0%. The properties enhancement ratio (PER) estimated that the tri-hybrid nanofluids will aid in heat transfer for all samples in the present. The new correlations for thermal conductivity and dynamic viscosity of tri-hybrid nanofluids were developed with minimum deviation. As a conclusion, the combination of the enhancement in thermal conductivity and dynamic viscosity for tri-hybrid at 0.3% volume concentration was found the optimum condition with more advantage for heat transfer than other concentrations.

DTM-FDM hybrid approach to unsteady MHD Couette flow and heat transfer of dusty fluid with variable properties

2017 ◽  
Vol 2 ◽  
pp. 57-63 ◽  
Author(s):  
Sobhan Mosayebidorcheh ◽  
O.D. Makinde ◽  
D.D. Ganji ◽  
M. Abedian Chermahini
Keyword(s):  
Heat Transfer ◽  
Couette Flow ◽  
Hybrid Approach ◽  
Variable Properties ◽  
Dusty Fluid ◽  
Flow And Heat Transfer ◽  
Mhd Couette Flow

Effect of porosity on the flow of a dusty fluid between parallel plates with heat transfer and uniform suction and injection

2013 ◽  
Vol 18 (2) ◽  
pp. 241-251 ◽  
Author(s):  
Hazem Ali Attia ◽  
W. Abbas ◽  
Mostafa A. M. Abdeen ◽  
M.S. Emam
Keyword(s):  
Heat Transfer ◽  
Parallel Plates ◽  
Dusty Fluid ◽  
Uniform Suction

scholarly journals Mixed convective hybrid nanofluid flow in lid-driven undulated cavity: effect of MHD and Joule heating

2019 ◽  
Vol 16 (2) ◽  
pp. 109-126 ◽  
Author(s):  
Ishrat Zahan ◽  
R Nasrin ◽  
M A Alim
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Heat Transfer Rate ◽  
Joule Heating ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Hybrid Nanoparticles ◽  
Wave Number ◽  
Hybrid Nanofluid

A numerical analysis has been conducted to show the effects of magnetohydrodynamic (MHD) and Joule heating on heat transfer phenomenon in a lid driven triangular cavity. The heat transfer fluid (HTF) has been considered as water based hybrid nanofluid composed of equal quantities of Cu and TiO2 nanoparticles. The bottom wall of the cavity is undulated in sinusoidal pattern and cooled isothermally. The left vertical wall of the cavity is heated while the inclined side is insulated. The two dimensional governing partial differential equations of heat transfer and fluid flow with appropriate boundary conditions have been solved by using Galerkin's finite element method built in COMSOL Multyphysics. The effects of Hartmann number, Joule heating, number of undulation and Richardson number on the flow structure and heat transfer characteristics have been studied in details. The values of Prandtl number and solid volume fraction of hybrid nanoparticles have been considered as fixed. Also, the code validation has been shown. The numerical results have been presented in terms of streamlines, isotherms and average Nusselt number of the hybrid nanofluid for different values of governing parameters. The comparison of heat transfer rate by using hybrid nanofluid, Cu-water nanofluid,  TiO2 -water nanofluid and clear water has been also shown. Increasing wave number from 0 to 3 enhances the heat transfer rate by 16.89%. The enhanced rate of mean Nusselt number for hybrid nanofluid is found as 4.11% compared to base fluid.

scholarly journals Three-dimensional Couette flow of a dusty fluid with heat transfer

2012 ◽  
Vol 36 (2) ◽  
pp. 683-701 ◽  
Author(s):  
B.J. Gireesha ◽  
A.J. Chamkha ◽  
C.S. Vishalakshi ◽  
C.S. Bagewadi
Keyword(s):  
Heat Transfer ◽  
Couette Flow ◽  
Three Dimensional ◽  
Dusty Fluid
Sign in / Sign up

Export Citation Format

Share Document