Set Point

2021 ◽  
Vol 77 (10) ◽  
pp. 5-6
Keyword(s):  
Set Point

Smart Plant Growth Control and Monitoring System for Indoor Hydroponic Farming

2019 ◽  
Vol 1 (2) ◽  
Author(s):  
Fina Supegina
Keyword(s):  
Water Level ◽  
Monitoring System ◽  
Growth Control ◽  
Set Point ◽  
Water Solvent ◽  
Growth Room ◽  
Smart Control ◽  
Level Sensor ◽  
Planting Method ◽  
Hydroponic Growth

Hydroponics is one of planting method that use water as a medium of plants growth, in this technique, mineral solution added into the water solvent, allowing the nutrient uptake process by the plants.  Farming by hydroponic method must pay attention to the following parameters namely, temperature, humidity, the level of water needs and nutrients and also the level of sunlight need for photosynthesis process.  This research used hydroponic technique in hydroponic growth room, and  there is a LED growth light as an alternate of sunlight, due to this room is closed without sunlight.  There are outputs displayed in monitoring system namely, temperature sensor, humidity sensor, ultrasound sensor to detect height of the plant and water level sensor to measured height of the water as a medium of the plant.  Results of measured sensor in hydroponic growth room explained as the following:  fan cooler worked when temperature , and humidity  .  Water pump worked when water level is less than 50% accordance set point.  Control on LED Growth Light and LED Bulb when LDR sensor reached set point > 500 in bright condition, and < 500 in dark condition respectively. The average of Time update/received data in thing speak web is 2.4 second. Keywords: Smart Control, Hydroponic, IoT, Monitoring

Control of an adiabatic continuous reactor by feeding catalyst

1980 ◽  
Vol 45 (11) ◽  
pp. 2903-2918 ◽  
Author(s):  
Josef Horák ◽  
Zina Valášková ◽  
František Jiráček
Keyword(s):  
Steady State ◽  
Reaction Temperature ◽  
Continuous Reactor ◽  
Control Element ◽  
Inlet Temperature ◽  
Switching Cycle ◽  
Point Temperature ◽  
Set Point ◽  
Constant Rate ◽  
Laboratory Reactor

Algorithms have been presented, analyzed and experimentally tested to stabilize the reaction temperature at constant inlet temperature and composition of the feed by controlled dispensing of the catalyst. The information for the control element is the course of the reaction temperature. If the temperature of the reaction mixture is below the set point, the catalyst is being fed into the reactor at a constant rate. If the reaction temperature is higher the catalyst dispenser is blocked; dispensing of the catalyst is not resumed until the set point temperature has been reached again. The amount of catalyst added is a function of the duration of the switching cycle. The effect has been discussed of the form of this function on the course of the switching cycle. The results have been tested experimentally on a laboratory reactor controlled in an unstable steady state.

In-situ application of an ANN algorithm for optimized chilled and condenser water temperatures set-point during cooling operation

2021 ◽  
Vol 233 ◽  
pp. 110666
Author(s):  
Won Hee Kang ◽  
Yeobeom Yoon ◽  
Je Hyeon Lee ◽  
Kwan Woo Song ◽  
Young Tae Chae ◽  
...  
Keyword(s):  
Set Point

scholarly journals A Modified 2-DOF Control Framework and GA Based Intelligent Tuning of PID Controllers

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 423
Author(s):  
Gun-Baek So
Keyword(s):  
Disturbance Rejection ◽  
Pid Controller ◽  
Weighting Function ◽  
Pid Controllers ◽  
Set Point ◽  
Tuning Method ◽  
Point Tracking ◽  
Load Disturbance ◽  
Control Framework ◽  
Feedforward Controller

Although a controller is well-tuned for set-point tracking, it shows poor control results for load disturbance rejection and vice versa. In this paper, a modified two-degree-of-freedom (2-DOF) control framework to solve this problem is proposed, and an optimal tuning method for the pa-rameters of each proportional integral derivative (PID) controller is discussed. The unique feature of the proposed scheme is that a feedforward controller is embedded in the parallel control structure to improve set-point tracking performance. This feedforward controller and the standard PID con-troller are combined to create a new set-point weighted PID controller with a set-point weighting function. Therefore, in this study, two controllers are used: a set-point weighted PID controller for set-point tracking and a conventional PID controller for load disturbance rejection. The parameters included in the two controllers are tuned separately to improve set-point tracking and load dis-turbance rejection performances, respectively. Each controller is optimally tuned by genetic algo-rithm (GA) in terms of minimizing the IAE performance index, and what is special at this time is that it also tunes the set-point weighting parameter simultaneously. The simulation results performed on four virtual processes verify that the proposed method shows better performance in set-point tracking and load disturbance rejection than those of the other methods.

scholarly journals Hierarchical set-point optimization and feedforward strategy for collector defocusing of a solar plant

Solar Energy ◽  
2021 ◽  
Vol 220 ◽  
pp. 282-294
Author(s):  
A.J. Sánchez ◽  
A.J. Gallego ◽  
J.M. Escaño ◽  
E.F. Camacho
Keyword(s):  
Set Point ◽  
Solar Plant
Sign in / Sign up

Export Citation Format

Share Document