Design and characterization of (Al, C)/p-Ge/p-BN/C isotype resonant electronic devices

2015 ◽  
Vol 212 (8) ◽  
pp. 1845-1850 ◽  
Author(s):  
S. E. Al Garni ◽  
A. F. Qasrawi
Keyword(s):  
Electronic Devices

scholarly journals Fabrication and Characterization of Nylon 66/PAN Nanofibrous Film Used as Separator of Lithium-Ion Battery

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 1984
Author(s):  
Yu-Hsun Nien ◽  
Chih-Ning Chang ◽  
Pao-Lin Chuang ◽  
Chun-Han Hsu ◽  
Jun-Lun Liao ◽  
...  
Keyword(s):  
Lithium Ion Battery ◽  
Lithium Batteries ◽  
Lithium Battery ◽  
Coulombic Efficiency ◽  
Electronic Devices ◽  
Lithium Ion ◽  
Nylon 66 ◽  
Excellent Electrochemical Performance ◽  
Fabrication And Characterization

In recent years, portable electronic devices have flourished, and the safety of lithium batteries has received increasing attention. In this study, nanofibers were prepared by electrospinning using different ratios of nylon 66/polyacrylonitrile (PAN), and their properties were studied and compared with commercial PP separators. The experimental results show that the addition of PAN in nylon 66/PAN nanofibrous film used as separator of lithium-ion battery can enhance the porosity up to 85%. There is also no significant shrinkage in the shrinkage test, and the thermal dimensional stability is good. When the Li/LiFePO4 lithium battery is prepared by nylon 66/PAN nanofibrous film used as separator, the capacitor can be maintained at 140 mAhg−1 after 20 cycles at 0.1 C, and the coulombic efficiency is still maintained at 99%, which has excellent electrochemical performance.

Characterization of a high performance ultra-thin heat pipe cooling module for mobile hand held electronic devices

2017 ◽  
Vol 53 (11) ◽  
pp. 3241-3247 ◽  
Author(s):  
Mohammad Shahed Ahamed ◽  
Yuji Saito ◽  
Koichi Mashiko ◽  
Masataka Mochizuki
Keyword(s):  
Heat Pipe ◽  
High Performance ◽  
Electronic Devices ◽  
Cooling Module

On-chip characterization of molecular electronic devices using CMOS

2007 ◽  
Author(s):  
Nadine Gergel-Hackett ◽  
Garrett S. Rose ◽  
Peter Paliwoda ◽  
Christina A. Hacker ◽  
Curt A. Richter
Keyword(s):  
Electronic Devices ◽  
Molecular Electronic ◽  
On Chip ◽  
Molecular Electronic Devices

scholarly journals Entropy Generation Methodology for Defect Analysis of Electronic and Mechanical Components—A Review

Entropy ◽  
2020 ◽  
Vol 22 (2) ◽  
pp. 254
Author(s):  
Miao Cai ◽  
Peng Cui ◽  
Yikang Qin ◽  
Daoshuang Geng ◽  
Qiqin Wei ◽  
...  
Keyword(s):  
Entropy Generation ◽  
Electronic Devices ◽  
Second Law Of Thermodynamics ◽  
Damage Analysis ◽  
Defect Analysis ◽  
Unique Role ◽  
Mechanical Components ◽  
Assessment Problems ◽  
The Relationship

Understanding the defect characterization of electronic and mechanical components is a crucial step in diagnosing component lifetime. Technologies for determining reliability, such as thermal modeling, cohesion modeling, statistical distribution, and entropy generation analysis, have been developed widely. Defect analysis based on the irreversibility entropy generation methodology is favorable for electronic and mechanical components because the second law of thermodynamics plays a unique role in the analysis of various damage assessment problems encountered in the engineering field. In recent years, numerical and theoretical studies involving entropy generation methodologies have been carried out to predict and diagnose the lifetime of electronic and mechanical components. This work aimed to review previous defect analysis studies that used entropy generation methodologies for electronic and mechanical components. The methodologies are classified into two categories, namely, damage analysis for electronic devices and defect diagnosis for mechanical components. Entropy generation formulations are also divided into two detailed derivations and are summarized and discussed by combining their applications. This work is expected to clarify the relationship among entropy generation methodologies, and benefit the research and development of reliable engineering components.

Towards the Synthesis of Mono- and Bi-Functional Amphiphilic Oligothiophenes: Organic Materials for Opto-Electronic Applications

1999 ◽  
Vol 561 ◽  
Author(s):  
R.C. Advincula ◽  
S. Inaoka ◽  
M. Park ◽  
D. Phillips ◽  
D.M. Shin
Keyword(s):  
Physical Properties ◽  
Ultrathin Films ◽  
Organic Materials ◽  
Photophysical Properties ◽  
Electronic Devices ◽  
Synthesis And Characterization ◽  
Important Class ◽  
Maldi Tof Ms ◽  
Tof Ms

ABSTRACTIn this report, we describe our initial synthesis and characterization of mono-functional and bi-functional dibromoalkyl oligothiophenes to achieve amphiphilicity and telechelic functionality. Oligothiophenes are an important class of organic materials for opto-electronic devices and display applications. We have mono-functionalized oligothiophenes by the synthesis of a quinquethiophene bromoalkyl derivative. A bi-functional sexithiophene was derived primarily by the symmetrical coupling of terthiophene derivatives. Both were synthesized using Grignard coupling and lithiation reaction methodologies. UV-Vis, IR, NMR, MALDI-TOF-MS, and DSC confirmed the structure and physical properties of the oligomers. In addition, we have also synthesized an amphiphilic diamine derivative from the reaction of hexamethylenediamine with a bromoalkyl terthiophene derivative. Using photoluminescence, the photophysical properties of the oligomers were found to be that of typical oligothiophenes. Processing as ultrathin films for devices is currently being investigated.

Dielectric Characterization of Polymer Dispersed Liquid Crystal in Microwave Range – Material Integration in Specific Electronic Devices

2011 ◽  
Vol 542 (1) ◽  
pp. 227/[749]-236/[758] ◽  
Author(s):  
Freddy Krasinski ◽  
Bertrand Splingart ◽  
Frédéric Dubois ◽  
Ulrich Maschke ◽  
Christian Legrand
Keyword(s):  
Liquid Crystal ◽  
Electronic Devices ◽  
Microwave Range ◽  
Dielectric Characterization ◽  
Polymer Dispersed Liquid Crystal ◽  
Polymer Dispersed
Sign in / Sign up

Export Citation Format

Share Document