INFLUENCE OF METAL SUBSTITUTE ON ELECTROCHEMICAL AND SORPTION CHARACTERISTICS OF LaNi5 BASED ALLOYS

2009 ◽  
pp. 645-650
Author(s):  
L. G. Shcherbakova ◽  
Yu. M. Solonin ◽  
Ye. N. Severyanina
Keyword(s):  
Sorption Characteristics

Characteristics Of The Structure Formation Of Gypsum Binder Modified With Zinc Hydrosilicates

2020 ◽  
pp. 40-46
Keyword(s):  
Synergistic Effect ◽  
Physicochemical Properties ◽  
Structure Formation ◽  
Silicic Acid ◽  
Chemical Properties ◽  
Crystal Formation ◽  
Ability To Act ◽  
Chemical Factors ◽  
Sorption Characteristics

The authors' methodic for assessing the role of chemical and physic-chemical factors during the structure formation of gypsum stone is presented in the article. The methodic is also makes it possible to reveal the synergistic effect and to determine the ranges of variation of controls factors that ensure maximum values of such effect. The effect of a micro-sized modifier based on zinc hydro-silicates on the structure formation of building gypsum is analyzed and corresponding dependencies are found. It is shown that effects of influence of modifier on the properties of gypsum compositions are determined by chemical properties of modifier. Among the mentioned properties are sorption characteristics (which depend on the amount of silicic acid and its state) and physicochemical properties - the ability to act as a substrate during crystal formation. The proposed method can also be extended to other binding substances and materials. This article contributes to the understanding of the processes that occur during the structure formation of composites, which will make it possible to control the structure formation in the future, obtaining materials with a given set of properties.

Природные материалы для сорбционной очистки хром- и кадмийсодержащих инфильтратов полигонов ТБО

2019 ◽  
pp. 13-19
Author(s):  
A. Safonov ◽  
N. Andriushchenko ◽  
N. Popova ◽  
K. Boldyrev
Keyword(s):  
Sorption Capacity ◽  
Electron Acceptors ◽  
Bacterial Cells ◽  
Maximum Sorption Capacity ◽  
Sorption Material ◽  
Maximum Sorption ◽  
Properties Of Materials ◽  
Solid Waste Landfills ◽  
Sorption Characteristics

Проведен анализ сорбционных характеристик природных материалов (вермикулит, керамзит, перлит, цеолит Трейд ) при очистке кадмий- и хромсодержащих сточных вод с высокой нагрузкой по ХПК. Установлено, что цеолит обладает максимальными сорбционными характеристиками для Cd и Cr и наименьшим биологическим обрастанием. При использовании вермикулита и керамзита или смесей на их основе можно ожидать увеличения сорбционной емкости для Cd и Сr при микробном обрастании, неизбежно происходящем в условиях контакта с водами, загрязненными органическими соединениями и биогенами. При этом биообрастание может повысить иммобилизационную способность материалов для редоксзависимых металлов за счет ферментативных ресурсов бактериальных клеток, использующих их в качестве акцепторов электронов. Эффект микробного обрастания разнонаправленно изменял параметры материалов: для Cr в большинстве случаев уменьшение и для Cd значительное увеличение. При этом дополнительным эффектом иммобилизации Cr является его биологическое восстановление биопленками. Варьируя состав сорбционного материала, можно подбирать смеси, оптимально подходящие для очистки вод инфильтратов с полигонов твердых бытовых отходов с высокой нагрузкой по ХПК и биогенным элементам как при использовании in situ, так и в системах на поверхности.The analysis of the sorption characteristics of natural materials (vermiculite, expanded clay, perlite, Trade zeolite) during the purification of cadmium and chromium-containing leachate with a high COD load was carried out. It was determined that zeolite had the maximum sorption capacity for Cd and Cr and the lowest biological fouling. When using vermiculite and expanded clay or mixtures on their basis, one can expect an increase in the sorption capacity for Cd and Cr during microbial fouling that inevitably occurs during contacting with water polluted with organic compounds and nutrients. In this case biofouling can increase the immobilization properties of materials for redox-dependent metals due to the enzymatic resources of bacterial cells that use them as electron acceptors. The effect of microbial fouling changed the parameters of materials in different directions: for Cr, in most cases, downward, and for Cd, significantly upward. Moreover, chromium biological recovery by biofilms is an additional effect of immobilization. Varying the composition of the sorption material provides for selecting mixtures that are optimally suitable for the purification of leachates from solid waste landfills with high COD and nutrients load, both when used in situ and in surface systems.

Sorption Characteristics of Actinium and Protactinium onto Soils

2002 ◽  
Vol 39 (sup3) ◽  
pp. 481-484 ◽  
Author(s):  
Yoshiaki Sakamoto ◽  
Tomoaki Ishii ◽  
Satora Inagawa ◽  
Yasuyoshi Gunji ◽  
Shinichi Takebe ◽  
...  
Keyword(s):  
Sorption Characteristics

Sorption characteristics of Pb(II) on alkaline Ca-bentonite

2012 ◽  
Vol 65-66 ◽  
pp. 21-23 ◽  
Author(s):  
Hanbing Zhang ◽  
Zhangfa Tong ◽  
Tengyou Wei ◽  
Yankui Tang
Keyword(s):  
Sorption Characteristics
Sign in / Sign up

Export Citation Format

Share Document