A novel in situ stress monitoring method, based on rheological stress recovery (RSR) theory, was proposed to monitor the stress of rock mass in deep underground engineering. The RSR theory indicates that the tiny hole in the rock can close gradually after it was drilled due to the rheology characteristic, during which process the stress that existed in the rock can be monitored in real-time. Then, a three-dimensional stress monitoring sensor, based on the vibrating wire technique, was developed for in field measurement. Furthermore, the in-field monitoring procedures for the proposed technique are introduced, including hole drilling, sensor installation, grouting, and data acquisition. Finally, two in situ tests were carried out on deep roadways at the Pingdingshan (PDS) No. 1 and No. 11 coal mines to verify the feasibility and reliability of the proposed technique. The relationship between the recovery stress and the time for the six sensor faces are discussed and the final stable values are calculated. The in situ stress components of rock masses under geodetic coordinates were calculated via the coordinate transformation equation and the results are consistent with the in situ stress data by different methods, which verified the effectiveness of the proposed method.
Development of an Underground In-Situ Stress Monitoring System for Mining Safety Using Multi Sensor Cell and Wi-Fi Direct Technology
