Partial-ACO Mutation Strategies to Scale-Up Fleet Optimisation and Improve Air Quality (Best Application Paper)

Author(s):  
Darren M. Chitty
2018 ◽  
Vol 33 (1) ◽  
pp. 63-76 ◽  
Author(s):  
Harriet Whiley ◽  
Sharyn Gaskin ◽  
Tiffany Schroder ◽  
Kirstin Ross

AbstractConcerns regarding indoor air quality, particularly the presence of fungi and moulds, are increasing. The potential for essential oils to reduce, control or remove fungi, is gaining interest as they are seen as a “natural” alternative to synthetic chemical fungicides. This review examines published research on essential oils as a method of fungal control in indoor environments. It was difficult to compare the relative performances of essential oils due to differences in research methods and reporting languages. In addition, there are limited studies that scale up laboratory results and assess the efficacy of essential oils within building environments. However, generally, there appears to be some evidence to support the essential oils clove oil, tea tree oil, oregano, thyme and lemon as potential antifungal agents. Essential oils from heartwood, marjoram, cinnamon, lemon basil, caraway, bay tree, fir, peppermint, pine, cedar leaf and manuka were identified in at least one study as having antifungal potential. Future studies should focus on comparing the effectiveness of these essential oils against a large number of fungal isolates from indoor environments. Studies will then need to focus on translating these results into realistic application methods, in actual buildings, and assess the potential for long-term antifungal persistence.


Author(s):  
L.E. Murr ◽  
J.S. Dunning ◽  
S. Shankar

Aluminum additions to conventional 18Cr-8Ni austenitic stainless steel compositions impart excellent resistance to high sulfur environments. However, problems are typically encountered with aluminum additions above about 1% due to embrittlement caused by aluminum in solid solution and the precipitation of NiAl. Consequently, little use has been made of aluminum alloy additions to stainless steels for use in sulfur or H2S environments in the chemical industry, energy conversion or generation, and mineral processing, for example.A research program at the Albany Research Center has concentrated on the development of a wrought alloy composition with as low a chromium content as possible, with the idea of developing a low-chromium substitute for 310 stainless steel (25Cr-20Ni) which is often used in high-sulfur environments. On the basis of workability and microstructural studies involving optical metallography on 100g button ingots soaked at 700°C and air-cooled, a low-alloy composition Fe-12Cr-5Ni-4Al (in wt %) was selected for scale up and property evaluation.


Author(s):  
J. B. Moran ◽  
J. L. Miller

The Clean Air Act Amendments of 1970 provide the basis for a dramatic change in Federal air quality programs. The Act establishes new standards for motor vehicles and requires EPA to establish national ambient air quality standards, standards of performance for new stationary sources of pollution, and standards for stationary sources emitting hazardous substances. Further, it establishes procedures which allow states to set emission standards for existing sources in order to achieve national ambient air quality standards. The Act also permits the Administrator of EPA to register fuels and fuel additives and to regulate the use of motor vehicle fuels or fuel additives which pose a hazard to public health or welfare.National air quality standards for particulate matter have been established. Asbestos, mercury, and beryllium have been designated as hazardous air pollutants for which Federal emission standards have been proposed.


ASHA Leader ◽  
2013 ◽  
Vol 18 (2) ◽  
pp. 34-34
Keyword(s):  

Air Quality May Affect Infants' Brains


2000 ◽  
Author(s):  
Rolf Puchtinger ◽  
Jennifer Payne ◽  
David White ◽  
Shelly Duncan

Sign in / Sign up

Export Citation Format

Share Document