scholarly journals Ontology-Based Calculation of Complexity Metrics for Components in CAD Systems

2021 ◽  
pp. 3-11
Author(s):  
Moritz Weber ◽  
Reiner Anderl
Keyword(s):  
Computer Aided Design ◽  
Influence Factors ◽  
Boundary Representation ◽  
Cad Systems ◽  
Complexity Metrics ◽  
Cad Models ◽  
History Of ◽  
Time Required ◽  
Feature Based Design ◽  
Aided Design

AbstractThe high complexity of assemblies and components in Computer-Aided Design (CAD) leads to a high effort in the maintenance of the models and increases the time required for adjustments. Metrics indicating the complexity of a CAD Model can help to reduce it by showing the results of changes. This paper describes a concept to calculate metrics aiming to describe the extent of complexity of components in CAD systems based on an ontology-based representation in a first step. The representation is initially generated from CAD models using an automated process. This includes both a boundary representation and the history of the feature-based design. Thus, the design strategy also contributes to measuring the complexity of the component so that the same shape can lead to different complexity metrics. Semantic rules are applied to find patterns of the design and to identify and evaluate various strategies. Different metrics are proposed to indicate the particular influence factors of complexity and a single measure for the overall complexity. Furthermore, the influencing factors can also be used to allow the designer to see how to reduce the complexity of the component or assembly.

scholarly journals An isogeometric b-rep mortar-based mapping method for non-matching grids in fluid-structure interaction

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Andreas Apostolatos ◽  
Altuğ Emiroğlu ◽  
Shahrokh Shayegan ◽  
Fabien Péan ◽  
Kai-Uwe Bletzinger ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Fluid Structure Interaction ◽  
Mapping Method ◽  
Boundary Representation ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Discrete Surface ◽  
Cad Models ◽  
Volume Method ◽  
Aided Design

AbstractIn this study the isogeometric B-Rep mortar-based mapping method for geometry models stemming directly from Computer-Aided Design (CAD) is systematically augmented and applied to partitioned Fluid-Structure Interaction (FSI) simulations. Thus, the newly proposed methodology is applied to geometries described by their Boundary Representation (B-Rep) in terms of trimmed multipatch Non-Uniform Rational B-Spline (NURBS) discretizations as standard in modern CAD. The proposed isogeometric B-Rep mortar-based mapping method is herein extended for the transformation of fields between a B-Rep model and a low order discrete surface representation of the geometry which typically results when the Finite Volume Method (FVM) or the Finite Element Method (FEM) are employed. This enables the transformation of such fields as tractions and displacements along the FSI interface when Isogeometric B-Rep Analysis (IBRA) is used for the structural discretization and the FVM is used for the fluid discretization. The latter allows for diverse discretization schemes between the structural and the fluid Boundary Value Problem (BVP), taking into consideration the special properties of each BVP separately while the constraints along the FSI interface are satisfied in an iterative manner within partitioned FSI. The proposed methodology can be exploited in FSI problems with an IBRA structural discretization or to FSI problems with a standard FEM structural discretization in the frame of the Exact Coupling Layer (ECL) where the interface fields are smoothed using the underlying B-Rep parametrization, thus taking advantage of the smoothness that the NURBS basis functions offer. All new developments are systematically investigated and demonstrated by FSI problems with lightweight structures whereby the underlying geometric parametrizations are directly taken from real-world CAD models, thus extending IBRA into coupled problems of the FSI type.

Geometric Reasoning for the Coding of CAD Models

1995 ◽  
Author(s):  
A. Z. Qamhiyah ◽  
B. Benhabib ◽  
R. D. Venter
Keyword(s):  
Computer Aided Design ◽  
Feature Recognition ◽  
Effective Means ◽  
Boundary Representation ◽  
Cad Model ◽  
Cad System ◽  
Cad Models ◽  
Form Features ◽  
Feature Based Design ◽  
Design Retrieval

Abstract Many of today’s concurrent product-development cycles depend on the utilization of intelligent Computer-Aided Design (CAD) systems. Thus, it would be essential to provide CAD users with effective means for interacting with the CAD system and its database. This paper addresses the development of a boundary-based coding procedure for CAD models. Coding the geometric and processing characteristics of objects, based on their CAD model representation, has been long recognized as an effective approach that allows convenient design retrieval on the one hand and process-planning automation on the other. Our work is based on the assumption that form features are recognizable and extractable from the CAD model by current feature-recognition, feature extraction and feature-based-design approaches. The coding procedure is applicable to the boundary representation of the object and its extracted form features.

scholarly journals Feature-based translation of CAD models with macro-parametric approach: issues of feature mapping, persistent naming, and constraint translation

2020 ◽  
Vol 7 (5) ◽  
pp. 603-614 ◽  
Author(s):  
Mutahar Safdar ◽  
Tahir Abbas Jauhar ◽  
Youngki Kim ◽  
Hanra Lee ◽  
Chiho Noh ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Parametric Approach ◽  
Model Data ◽  
Feature Mapping ◽  
Product Model ◽  
Cad Systems ◽  
Cad System ◽  
Cad Models ◽  
Feature Based ◽  
Aided Design

Abstract Feature-based translation of computer-aided design (CAD) models allows designers to preserve the modeling history as a series of modeling operations. Modeling operations or features contain information that is required to modify CAD models to create different variants. Conventional formats, including the standard for the exchange of product model data or the initial graphics exchange specification, cannot preserve design intent and only geometric models can be exchanged. As a result, it is not possible to modify these models after their exchange. Macro-parametric approach (MPA) is a method for exchanging feature-based CAD models among heterogeneous CAD systems. TransCAD, a CAD system for inter-CAD translation, is based on this approach. Translators based on MPA were implemented and tested for exchange between two commercial CAD systems. The issues found during the test rallies are reported and analyzed in this work. MPA can be further extended to remaining features and constraints for exchange between commercial CAD systems.

Orthogonal Distance Fields Representation for Machine-Learning Based Manufacturability Analysis

2020 ◽  
Author(s):  
Aditya Balu ◽  
Sambit Ghadai ◽  
Soumik Sarkar ◽  
Adarsh Krishnamurthy
Keyword(s):  
Machine Learning ◽  
Computer Aided Design ◽  
Boundary Representation ◽  
Engineering Product ◽  
Distance Fields ◽  
Computer Aided ◽  
Cad Models ◽  
Product Design Process ◽  
3D Cnn ◽  
Aided Design

Abstract Computer-aided Design for Manufacturing (DFM) systems play an essential role in reducing the time taken for product development by providing manufacturability feedback to the designer before the manufacturing phase. Traditionally, DFM rules are hand-crafted and used to accelerate the engineering product design process by integrating manufacturability analysis during design. Recently, the feasibility of using a machine learning-based DFM tool in intelligently applying the DFM rules have been studied. These tools use a voxelized representation of the design and then use a 3D-Convolutional Neural Network (3D-CNN), to provide manufacturability feedback. Although these frameworks work effectively, there are some limitations to the voxelized representation of the design. In this paper, we introduce a new representation of the computer-aided design (CAD) model using orthogonal distance fields (ODF). We provide a GPU-accelerated algorithm to convert standard boundary representation (B-rep) CAD models into ODF representation. Using the ODF representation, we build a machine learning framework, similar to earlier approaches, to create a machine learning-based DFM system to provide manufacturability feedback. As proof of concept, we apply this framework to assess the manufacturability of drilled holes. The framework has an accuracy of more than 84% correctly classifying the manufacturable and non-manufacturable models using the new representation.

Computation of Midsurface by Feature-Based Simplification–Abstraction–Decomposition

2016 ◽  
Vol 17 (1) ◽  
Author(s):  
Yogesh H. Kulkarni ◽  
Anil Sahasrabudhe ◽  
Mukund Kale
Keyword(s):  
Computer Aided Design ◽  
Real Life ◽  
Boundary Representation ◽  
Manual Task ◽  
Computer Aided ◽  
Cad Models ◽  
Feature Based ◽  
Feature Information ◽  
Plastic Parts ◽  
Aided Design

Computer-aided design (CAD) models of thin-walled solids such as sheet metal or plastic parts are often reduced dimensionally to their corresponding midsurfaces for quicker and fairly accurate results of computer-aided engineering (CAE) analysis. Computation of the midsurface is still a time-consuming and mostly, a manual task due to lack of robust and automated techniques. Most of the existing techniques work on the final shape (typically in the form of boundary representation, B-rep). Complex B-reps make it hard to detect subshapes for which the midsurface patches are computed and joined, forcing usage of hard-coded heuristic rules, developed on a case-by-case basis. Midsurface failures manifest in the form of gaps, overlaps, nonmimicking input model, etc., which can take hours or even days to correct. The research presented here proposes to address these problems by leveraging feature-information available in the modern CAD models, and by effectively using techniques like simplification, abstraction, and decomposition. In the proposed approach, first, the irrelevant features are identified and removed from the input FbCAD model to compute its simplified gross shape. Remaining features then undergo abstraction to transform into their corresponding generic Loft-equivalents, each having a profile and a guide curve. The model is then decomposed into cellular bodies and a graph is populated, with cellular bodies at the nodes and fully overlapping-surface-interfaces at the edges. The nodes are classified into midsurface-patch generating nodes (called “solid cells” or sCells) and interaction-resolving nodes (“interface cells” or iCells). In a sCell, a midsurface patch is generated either by offset or by sweeping the midcurve of the owner-Loft-feature's profile along with its guide curve. Midsurface patches are then connected in the iCells in a generic manner, thus resulting in a well-connected midsurface with minimum failures. Output midsurface is then validated topologically for correctness. At the end of this paper, real-life parts are used to demonstrate the efficacy of the proposed approach.

scholarly journals PROGRAMS FOR COMPUTER MODELING OF MECHANISM KINEMATICS

2020 ◽  
Vol 7 (2) ◽  
pp. 037-048
Author(s):  
T. A. Sheveleva ◽  
Keyword(s):  
Computer Modeling ◽  
Computer Aided Design ◽  
Modern Technology ◽  
Cad Systems ◽  
Kinematic Study ◽  
Special Programs ◽  
History Of ◽  
Design Systems ◽  
The Cost ◽  
Aided Design

The article presents the history of the creation of computer-aided design systems, an overview of special programs and CAD systems for the kinematic study of mechanisms, as well as examples of the use of these programs in computer simulation of the movement of mechanisms. The urgency of this problem is determined by the need to perform synthesis and analysis of mechanisms that have found wide application in modern technology. The use of computer modeling for the kinematic study of mechanisms allows you to reduce the time for designing mechanisms, and with this the cost of the final product.

A Methodology for Building Up an Infrastructure of Haptically Enhanced Computer-Aided Design Systems

2008 ◽  
Vol 8 (4) ◽  
Author(s):  
Weihang Zhu
Keyword(s):  
Computer Aided Design ◽  
Force Feedback ◽  
Haptic Rendering ◽  
Haptic Interface ◽  
Cad Systems ◽  
3D Cad ◽  
Cad System ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

This paper presents an infrastructure that integrates a haptic interface into a mainstream computer-aided design (CAD) system. A haptic interface, by providing force feedback in human-computer interaction, can improve the working efficiency of CAD/computer-aided manufacturing (CAM) systems in a unique way. The full potential of the haptic technology is best realized when it is integrated effectively into the product development environment and process. For large manufacturing companies this means integration into a commercial CAD system (Stewart, et al., 1997, “Direct Integration of Haptic User Interface in CAD Systems,” ASME Dyn. Syst. Control Div., 61, pp. 93–99). Mainstream CAD systems typically use constructive solid geometry (CSG) and boundary representation (B-Rep) format as their native format, while internally they automatically maintain triangulated meshes for graphics display and for numerical evaluation tasks such as surface-surface intersection. In this paper, we propose to render a point-based haptic force feedback by leveraging built-in functions of the CAD systems. The burden of collision detection and haptic rendering computation is alleviated by using bounding spheres and an OpenGL feedback buffer. The major contribution of this paper is that we developed a sound structure and methodology for haptic interaction with native CAD models inside mainstream CAD systems. We did so by analyzing CAD application models and by examining haptic rendering algorithms. The technique enables the user to directly touch and manipulate native 3D CAD models in mainstream CAD systems with force/touch feedback. It lays the foundation for future tasks such as direct CAD model modification, dynamic simulation, and virtual assembly with the aid of a haptic interface. Hence, by integrating a haptic interface directly with mainstream CAD systems, the powerful built-in functions of CAD systems can be leveraged and enhanced to realize more agile 3D CAD design and evaluation.

Haptic Guided Rigid Body Dynamics Study for Virtual Assembly in Mainstream CAD Systems

2007 ◽  
Author(s):  
Weihang Zhu
Keyword(s):  
Computer Aided Design ◽  
Virtual Assembly ◽  
Rigid Body Dynamics ◽  
Dynamics Simulation ◽  
Haptic Interface ◽  
Cad Systems ◽  
Cad System ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

This paper presents our exploration in Haptic-guided Dynamics Simulation in a mainstream Computer-aided Design (CAD) System. Haptic interface, by providing force feedback in human-computer interaction, can improve the working efficiency of CAD/CAM (Computer-aided Design and Manufacturing) systems in a unique way. The full potential of the haptic technology is best realized when it is integrated effectively into the product development environment and process. For large manufacturing companies this means integration into a commercial CAD system [Stewart 1997]. Built on our past foundation work on an infrastructure of haptically enhanced CAD system [Zhu 2006], this research continues to explore the algorithms for dynamics simulation guided with haptic interface. This is fundamental to other tasks such as Virtual Assembly and Digital Mock-up. The research follows a modular haptic rendering algorithm for stable and transparent 6-DOF manipulation as presented in [Otaduy 2006], with improvements by leveraging the built-in CAD system functions and third party Dynamics Engines. The native CAD models are converted to triangulated meshes which are used in object-object collision detection and dynamics response computation. The major contribution of this paper is that we have developed a feasible methodology for haptic-guided dynamic interactions among CAD models inside mainstream CAD systems. It lays the foundation for future tasks such as direct CAD model modification and virtual assembly with the aid of haptic interface.

Assessing the Effect of Incentive on Computer-Aided Design Intent

2009 ◽  
Author(s):  
Michael D. Johnson ◽  
Ram Prasad Diwakaran
Keyword(s):  
Feature Selection ◽  
Computer Aided Design ◽  
Organization Design ◽  
Design Team ◽  
Design Intent ◽  
Computer Aided ◽  
Cad Models ◽  
Time Required ◽  
Aided Design

In today’s global and digital world, computer-aided design (CAD) can facilitate communication among design team members and make engineers more efficient. To meet the needs of the modern design team it is important that CAD models be formulated in a manner that is easily understood and that they can easily be altered. This work examines the role of an incentive to produce models quickly on feature selection, order, and organization (design intent). The role of design intent on model perception and the time required to alter a model is also investigated. The incentive to produce designs quickly is shown to have a negative effect on model attributes associated with proper design intent. Feature selection and organization are shown to affect model perception. The overall rating of a model is shown to be correlated with the time required to alter it. The importance of design intent on the perception of, and alteration time for, CAD models is shown.

scholarly journals Automatized Evaluation of Students’ CAD Models

2021 ◽  
Vol 11 (4) ◽  
pp. 145
Author(s):  
Nenad Bojcetic ◽  
Filip Valjak ◽  
Dragan Zezelj ◽  
Tomislav Martinec
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Application ◽  
Test Cases ◽  
Cad Model ◽  
Computer Solution ◽  
3D Cad ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

The article describes an attempt to address the automatized evaluation of student three-dimensional (3D) computer-aided design (CAD) models. The driving idea was conceptualized under the restraints of the COVID pandemic, driven by the problem of evaluating a large number of student 3D CAD models. The described computer solution can be implemented using any CAD computer application that supports customization. Test cases showed that the proposed solution was valid and could be used to evaluate many students’ 3D CAD models. The computer solution can also be used to help students to better understand how to create a 3D CAD model, thereby complying with the requirements of particular teachers.

Sign in / Sign up

Export Citation Format

Share Document