Performance Analysis of Microstrip Antenna with Semi-eliptical Slotted Patch and Defected Ground Structure at 28 GHz for 5G Communication Systems

Author(s):  
Ayane Lebeta Goshu ◽  
Mulugeta Tegegn Gemeda ◽  
Kinde Anlay Fante

In this paper, a compact microstrip patch has a slot associated with the Defected Ground Structure radiator is presented. Instead of semi-infinite ground plane, the proposed antenna adopts the defected ground plane. The Radiating patch mendacity on the FR-4 substrate which is having dielectric constant of 4.4, thereby provides good bandwidth. This microstrip antenna is designed for wide bandwidth applications in range of 5.5GHz to 7.25GHz. Proposed work introduces a methodology wherein reducing of structure’s increase the bandwidth as well as return loss with defected ground structure (DGS).However since communication systems require small size, broad band and multiband antennas, monopoles have to be ensued for fabricating broad-band and wide-band antennas. In the proposed work investigations are carried out to design a new antenna with broad-band properties. Simulations are carried out via An soft HFSS electromagnetic simulator software- fabricated on FR-4 Substrate and tested with Vector network Analyzer. Measurement and Simulation results obtained prove the applicability of proposed antenna in 5.5GHz to 7.25GHz frequency range with a return loss of -31.3dB and 11.5dB etc. Microstrip feed line technique is used to feed the antenna with 50Ω impedance.


2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Pravin Ratilal Prajapati

An application of defected ground structure (DGS) to reduce out-of-band harmonics has been presented. A compact, proximity feed fractal slotted microstrip antenna for wireless local area network (WLAN) applications has been designed. The proposed 3rd iteration reduces antenna size by 43% as compared to rectangular conventional antenna and by introducing H shape DGS, the size of an antenna is further reduced by 3%. The DGS introduces stop band characteristics and suppresses higher harmonics, which are out of the band generated by 1st, 2nd, and 3rd iterations. H shape DGS is etched below the 50 Ω feed line and transmission coefficient parameters (S21) are obtained by CST Microwave Studio software. The values of equivalent L and C model have been extracted using a trial version of the diplexer filter design software. The stop band characteristic of the equivalent LC model also has been simulated by the Advance Digital System software, which gives almost the same response as compared to the simulation of CST Microwave Studio V. 12. The proposed antenna operates from 2.4 GHz to 2.49 GHz, which covers WLAN band and has a gain of 4.46 dB at 2.45 GHz resonance frequency.


2018 ◽  
Vol 218 ◽  
pp. 03015 ◽  
Author(s):  
Ahmad Firdausi ◽  
Galang Hakim ◽  
Mudrik Alaydrus

One of the technologies that has wireless application nowadays was 5G mobile communication.This paper presents the designing of a Tri-band microstrip antenna for targeting 5G broadband communications, This element antenna has 3x3 rectangular patches with feeding line structures are branched. With the use of double feeding proximity coupling structure, we intend to maximize antenna bandwidth, therefore the antenna cover range tri-band frequency from 40 GHz to 70 GHz. The reflection factor comparation between simulation and measurement has a minimum with respective frequency at 45.3 GHz, 57 GHz, and 66 GHz. The total measurement bandwith 11.5 Ghz. With this combination tecnique, the proposed antenna is a promising candidate for 5G communication systems.


Sign in / Sign up

Export Citation Format

Share Document