Petrographic Characterization of Waste Rocks: Applicability as Concrete Aggregates

Author(s):  
Maria del Pilar Durante Ingunza ◽  
Antonio Carlos Galindo ◽  
Ana Beatriz Azevedo de Medeiros
Proceedings ◽  
2019 ◽  
Vol 34 (1) ◽  
pp. 7 ◽  
Author(s):  
Marija Nedeljković ◽  
Jeanette Visser ◽  
Siska Valcke ◽  
Erik Schlangen

In the Netherlands, yearly 20 Mt Construction- and Demolition waste (CDW) is being produced mainly consisting of concrete and masonry rubble. This is two third of the yearly production of concrete (33 Mt). Currently, less than 1 Mt/year of the 20 Mt/year CDW is recycled in new concrete (mainly as coarse recycled concrete aggregates). This preliminary study being part of a larger study, is aiming to increase that amount, amongst others by focusing on use of the fine recycled concrete aggregates. Fine recycled concrete aggregates (fRCA) appear promising for (partial) replacement of natural fine aggregates (sand) and cement in new concrete. Nevertheless, they can be expected to have adverse properties and components that may reduce the performance of the concrete. Their physical, chemical and mechanical properties, which thus may significantly differ from that of natural sand, are still far from being fully investigated. The present paper focusses on characterization of physical properties of fRCA for finding the most critical indicators for fRCA quality. The tests include particle size distribution, morphology, BET surface area, solid density and water absorption of individual and total fractions (0–0.25 mm, 0.25–4 mm and 0–4 mm). The tests are performed on three fRCAs with different origin. Natural river sand with 96 wt.% of SiO2 was also studied to provide a baseline for comparison. Experimental results showed that, on the one side, the particle size distribution, surface area and amounts of individual fractions of fRCAs are significantly different from that of natural sand and that there is a large difference between each other. This is caused by variations of the parent concrete properties and by the type of recycling technique and processes (one step or multiple steps crushing). On the other side, fRCAs have comparative solid densities, which were still lower than that of natural sand. It was also shown that difference in water absorption between fractions 0.25–4 mm and 0–4 mm is very small in all three fRCAs groups. The results of this study will be used for future correlations between investigated properties of fRCAs with properties of concretes with fRCAs. This will be investigated in the next stage of the project, such that these correlations can enable production of durable concretes with fRCAs and assist recyclers in optimization of their production processes based on quality control of fRCAs.


2018 ◽  
Vol 181 ◽  
pp. 155-165 ◽  
Author(s):  
Soon Poh Yap ◽  
Paul Zhao Chiat Chen ◽  
Yingxin Goh ◽  
Hussein Adebayo Ibrahim ◽  
Kim Hung Mo ◽  
...  

2020 ◽  
Vol 137 ◽  
pp. 106190 ◽  
Author(s):  
Andreas Leemann ◽  
Zhenguo Shi ◽  
Jan Lindgård
Keyword(s):  

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 695
Author(s):  
Azzeddine Benahsina ◽  
Yassine Taha ◽  
Rachida Bouachera ◽  
Mohamed Elomari ◽  
Mohammed Abdouh Bennouna

The purpose of this research was to evaluate the possibility of using gold mine waste rocks (GMWRs) as alternative raw material for the manufacturing of fired bricks. The feasibility study was assessed through (i) physical, chemical, mineralogical and environmental characteristics of GMWRs; (ii) determination of the natural clay (NC) substitution effect when using GMWRs; (iii) the effect of the firing temperature on the mechanical and physical properties of the fired bricks. Five mixtures of NC and GMWRs were studied. The percentages of substitution of NC with GMWRs varied from 0 to 100%. The brick specimens were fired at 900 °C, 1000 °C and 1050 °C. The results show that increasing the firing temperature improved the flexural strength and density of the bricks, while the substitution of NC with GMWRs caused a reduction in the mechanical resistance of the bricks and an increase in their porosity and, consequently, their water absorption rate. However, the properties of bricks that contained up to 80 wt% of GMWRs and fired at 1000 °C and 1050 °C satisfied the requirements set by the applicable civil engineering and environmental standards. This was found to be an efficient and sustainable solution to mitigate environmental hazards and better manage mining wastes, concurrently producing marketable products from them, which is in accordance with the circular economy concept.


Sign in / Sign up

Export Citation Format

Share Document