Optimization of the Inertial and Acceleration Characteristics of Non-Redundant Manipulators

1995 ◽  
pp. 500-510
Author(s):  
Oussama Khatib ◽  
Alan Bowling
Keyword(s):  
Redundant Manipulators

Investigating the potential of redundant manipulators in narrow channels

2020 ◽  
pp. 095440622096451
Author(s):  
Ashish Singla ◽  
Jyotindra Narayan ◽  
Himanshu Arora
Keyword(s):  
Case Studies ◽  
Fuzzy Inference ◽  
Redundant Manipulators ◽  
Redundancy Resolution ◽  
Inference System ◽  
Narrow Channels ◽  
First Case ◽  
Task Priority ◽  
Patient Side

In this paper, an attempt has been made to investigate the potential of redundant manipulators, while tracking trajectories in narrow channels. The behavior of redundant manipulators is important in many challenging applications like under-water welding in narrow tanks, checking the blockage in sewerage pipes, performing a laparoscopy operation etc. To demonstrate this snake-like behavior, redundancy resolution scheme is utilized using two different approaches. The first approach is based on the concept of task priority, where a given task is split and prioritize into several subtasks like singularity avoidance, obstacle avoidance, torque minimization, and position preference over orientation etc. The second approach is based on Adaptive Neuro Fuzzy Inference System (ANFIS), where the training is provided through given datasets and the results are back-propagated using augmentation of neural networks with fuzzy logics. Three case studies are considered in this work to demonstrate the redundancy resolution of serial manipulators. The first case study of 3-link manipulator is attempted with both the approaches, where the objective is to track the desired trajectory while avoiding multiple obstacles. The second case study of 7-link manipulator, tracking trajectory in a narrow channel, is investigated using the concept of task priority. The realistic application of minimum-invasive surgery (MIS) based trajectory tracking is considered as the third case study, which is attempted using ANFIS approach. The 5-link spatial redundant manipulator, also known as a patient-side manipulator being developed at CSIR-CSIO, Chandigarh is used to track the desired surgical cuts. Through the three case studies, it is well demonstrated that both the approaches are giving satisfactory results.

scholarly journals Finite-Horizon Kinetic Energy Optimization of a Redundant Space Manipulator

2021 ◽  
Vol 11 (5) ◽  
pp. 2346
Author(s):  
Alessandro Tringali ◽  
Silvio Cocuzza
Keyword(s):  
Kinetic Energy ◽  
Real Time ◽  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Computational Time ◽  
Redundant Manipulators ◽  
Space Robotics ◽  
Optimal Method ◽  
End Effector ◽  
Global Optimal

The minimization of energy consumption is of the utmost importance in space robotics. For redundant manipulators tracking a desired end-effector trajectory, most of the proposed solutions are based on locally optimal inverse kinematics methods. On the one hand, these methods are suitable for real-time implementation; nevertheless, on the other hand, they often provide solutions quite far from the globally optimal one and, moreover, are prone to singularities. In this paper, a novel inverse kinematics method for redundant manipulators is presented, which overcomes the above mentioned issues and is suitable for real-time implementation. The proposed method is based on the optimization of the kinetic energy integral on a limited subset of future end-effector path points, making the manipulator joints to move in the direction of minimum kinetic energy. The proposed method is tested by simulation of a three degrees of freedom (DOF) planar manipulator in a number of test cases, and its performance is compared to the classical pseudoinverse solution and to a global optimal method. The proposed method outperforms the pseudoinverse-based one and proves to be able to avoid singularities. Furthermore, it provides a solution very close to the global optimal one with a much lower computational time, which is compatible for real-time implementation.

Relation between global velocity and local torque optimization of redundant manipulators

1994 ◽  
Vol 11 (4) ◽  
pp. 271-279 ◽  
Author(s):  
B. Hu ◽  
C. L. Teo ◽  
H. P. Lee
Keyword(s):  
Redundant Manipulators
Sign in / Sign up

Export Citation Format

Share Document