During the multi-channel confluent water supply process, the pressure control of the main pipe is often held back by such problems as non-linearity, hysteresis and parameter uncertainty, its own unique load dynamic changes, channel switching disturbance and other system characteristics caused by the actual working conditions. Moreover, pressure fluctuations in the main pipe will lead to a reduction in the service life of fire-fighting equipment, an increase in the failure rate, and even an interruption of the fire-fighting water supply. Therefore, a master and auxiliary control strategy is proposed to stabilize the pressure change in the process of multi-channel concentrated water supply switching, by using variable universe fuzzy proportional integral derivative (PID) control as the main controller on the main pipe and traditional PID control as the subsidiary controller on the channel. The control strategy is verified by the co-simulation platforms of LabVIEW and AMESim. Simulation results show that the variable universe fuzzy PID control and the master and auxiliary compound control based on the variable universe fuzzy PID control have advantages in step response, tracking response and anti-interference, respectively. The parameters obtained in the co-simulation are used in the experimental system. The experimental results show that the maximum deviation rate of main pipe pressure can be reduced by about 10% compared with other control methods under different loads. In conclusion, the proposed control strategy has strong anti-interference ability, fast dynamic response speed, high stability and good peak shaving effect.
A Novel Transverse Flux Permanent Magnet Disk Wind Power Generator with H-Shaped Stator Cores
