Critical Current Measurements of Prototype Cables for the CERN LHC Up to 50 kA and between 7 and 13 Tesla Using a Superconducting Transformer Circuit

1990 ◽  
pp. 60-65 ◽  
Author(s):  
H. H. J. ten Kate ◽  
B. ten Haken ◽  
S. Wessel ◽  
J. A. Eikelboom ◽  
E. M. Hornsveld
Keyword(s):  
Critical Current

Microstructural characterization of YBa2Cu3O7-x thin films formed by metalorganic CVD

1991 ◽  
Vol 49 ◽  
pp. 1080-1081
Author(s):  
P. Lu ◽  
W. Huang ◽  
C.S. Chern ◽  
Y.Q. Li ◽  
J. Zhao ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Film Growth ◽  
Chemical Vapor ◽  
Microstructural Characterization ◽  
Ion Milling ◽  
Conventional Grinding

The YBa2Cu3O7-x thin films formed by metalorganic chemical vapor deposition(MOCVD) have been reported to have excellent superconducting properties including a sharp zero resistance transition temperature (Tc) of 89 K and a high critical current density of 2.3x106 A/cm2 or higher. The origin of the high critical current in the thin film compared to bulk materials is attributed to its structural properties such as orientation, grain boundaries and defects on the scale of the coherent length. In this report, we present microstructural aspects of the thin films deposited on the (100) LaAlO3 substrate, which process the highest critical current density.Details of the thin film growth process have been reported elsewhere. The thin films were examined in both planar and cross-section view by electron microscopy. TEM sample preparation was carried out using conventional grinding, dimpling and ion milling techniques. Special care was taken to avoid exposure of the thin films to water during the preparation processes.

Facet Topography and Dislocation Structure as a Possible Source for Electrical Heterogeneity in [001] TILT Bicrystals of YBa2Cu3O7-δ

1996 ◽  
Vol 54 ◽  
pp. 338-339
Author(s):  
I-Fei Tsu ◽  
D.L. Kaiser ◽  
S.E. Babcock
Keyword(s):  
Grain Boundary ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Electromagnetic Properties ◽  
Length Scale ◽  
Density Values ◽  
Current Densities ◽  
Applied Fields ◽  
A Current

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.

Development of a thick GdBCO and ZrO2-doped GdBCO film with a high critical current on a PLD-CeO2/IBAD-GZO metal substrate

2007 ◽  
Vol 463-465 ◽  
pp. 630-632 ◽  
Author(s):  
A. Kinoshita ◽  
K. Takahashi ◽  
H. Kobayashi ◽  
Y. Yamada ◽  
A. Ibi ◽  
...  
Keyword(s):  
Critical Current ◽  
Metal Substrate

Magnetic field dependence of the critical current anisotropy in normal metal‐YBa2Cu3O7−δthin‐film bilayers

1991 ◽  
Vol 58 (11) ◽  
pp. 1205-1207 ◽  
Author(s):  
R. H. Ono ◽  
L. F. Goodrich ◽  
J. A. Beall ◽  
M. E. Johansson ◽  
C. D. Reintsema
Keyword(s):  
Magnetic Field ◽  
Critical Current ◽  
Field Dependence ◽  
Magnetic Field Dependence ◽  
Normal Metal

The shock-wave application for increasing of a critical current in composite HTSC

2013 ◽  
Vol 10 (4) ◽  
pp. 689-692 ◽  
Author(s):  
Galina Mikhailova ◽  
Landysh Antonova ◽  
Irina Borovitskaya ◽  
Oleg Krokhin ◽  
Alexey Majorov ◽  
...  
Keyword(s):  
Shock Wave ◽  
Critical Current

scholarly journals Characteristics of Microstructure Evolution during FAST Joining of the Tungsten Foil Laminate

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 886
Author(s):  
Xiaoyue Tan ◽  
Wujie Wang ◽  
Xiang Chen ◽  
Yiran Mao ◽  
Andrey Litnovsky ◽  
...  
Keyword(s):  
Critical Current ◽  
Current Density ◽  
High Current Density ◽  
Operation Mode ◽  
Sharp Peak ◽  
Advanced Materials ◽  
Peak Current ◽  
Tungsten Foil ◽  
Field Assisted Sintering ◽  
Joining Process

The tungsten (W) foil laminate is an advanced material concept developed as a solution for the low temperature brittleness of W. However, the deformed W foils inevitably undergo microstructure deterioration (crystallization) during the joining process at a high temperature. In this work, joining of the W foil laminate was carried out in a field-assisted sintering technology (FAST) apparatus. The joining temperature was optimized by varying the temperature from 600 to 1400 °C. The critical current for mitigating the microstructure deterioration of the deformed W foil was evaluated by changing the sample size. It is found that the optimal joining temperature is 1200 °C and the critical current density is below 418 A/cm2. According to an optimized FAST joining process, the W foil laminate with a low microstructure deterioration and good interfacial bonding can be obtained. After analyzing these current profiles, it was evident that the high current density (sharp peak current) is the reason for the significant microstructure deterioration. An effective approach of using an artificial operation mode was proposed to avoid the sharp peak current. This study provides the fundamental knowledge of FAST principal parameters for producing advanced materials.

Sign in / Sign up

Export Citation Format

Share Document