The shock-wave application for increasing of a critical current in composite HTSC

After materials with superconducting temperatures higher than liquid nitrogen have been prepared, more emphasis has been on increasing the current densities (Jc) of high Tc superconductors than finding new materials with higher transition temperatures. Different processing techniques i.e thin films, shock wave processing, neutron radiation etc. have been applied in order to increase Jc. Microstructural studies of compounds thus prepared have shown either a decrease in gram boundaries that act as weak-links or increase in defect structure that act as flux-pinning centers. We have studied shock wave synthesized Tl-Ba-Cu-O and shock wave processed Y-123 superconductors with somewhat different properties compared to those prepared by solid-state reaction. Here we report the defect structures observed in the shock-processed Y-124 superconductors.

Download Full-text

Microstructural characterization of YBa2Cu3O7-x thin films formed by metalorganic CVD

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100089718 ◽

1991 ◽

Vol 49 ◽

pp. 1080-1081

Author(s):

P. Lu ◽

W. Huang ◽

C.S. Chern ◽

Y.Q. Li ◽

J. Zhao ◽

...

Keyword(s):

Thin Film ◽

Thin Films ◽

Critical Current Density ◽

Critical Current ◽

Current Density ◽

Film Growth ◽

Chemical Vapor ◽

Microstructural Characterization ◽

Ion Milling ◽

Conventional Grinding

The YBa2Cu3O7-x thin films formed by metalorganic chemical vapor deposition(MOCVD) have been reported to have excellent superconducting properties including a sharp zero resistance transition temperature (Tc) of 89 K and a high critical current density of 2.3x106 A/cm2 or higher. The origin of the high critical current in the thin film compared to bulk materials is attributed to its structural properties such as orientation, grain boundaries and defects on the scale of the coherent length. In this report, we present microstructural aspects of the thin films deposited on the (100) LaAlO3 substrate, which process the highest critical current density.Details of the thin film growth process have been reported elsewhere. The thin films were examined in both planar and cross-section view by electron microscopy. TEM sample preparation was carried out using conventional grinding, dimpling and ion milling techniques. Special care was taken to avoid exposure of the thin films to water during the preparation processes.

Download Full-text

Investigation of shock-wave deformation history from recovered structure

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100143754 ◽

1986 ◽

Vol 44 ◽

pp. 434-435

Author(s):

M.A. Mogilevsky ◽

L.S. Bushnev

Keyword(s):

Shock Wave ◽

Plastic Deformation ◽

Dislocation Density ◽

Shock Waves ◽

Shock Front ◽

Single Crystals ◽

Residual Deformation ◽

Deformation Structure ◽

Deformation History ◽

Deformation Velocity

Single crystals of Al were loaded by 15 to 40 GPa shock waves at 77 K with a pulse duration of 1.0 to 0.5 μs and a residual deformation of ∼1%. The analysis of deformation structure peculiarities allows the deformation history to be re-established.After a 20 to 40 GPa loading the dislocation density in the recovered samples was about 1010 cm-2. By measuring the thickness of the 40 GPa shock front in Al, a plastic deformation velocity of 1.07 x 108 s-1 is obtained, from where the moving dislocation density at the front is 7 x 1010 cm-2. A very small part of dislocations moves during the whole time of compression, i.e. a total dislocation density at the front must be in excess of this value by one or two orders. Consequently, due to extremely high stresses, at the front there exists a very unstable structure which is rearranged later with a noticeable decrease in dislocation density.

Download Full-text

Facet Topography and Dislocation Structure as a Possible Source for Electrical Heterogeneity in [001] TILT Bicrystals of YBa2Cu3O7-δ

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100164155 ◽

1996 ◽

Vol 54 ◽

pp. 338-339

Author(s):

I-Fei Tsu ◽

D.L. Kaiser ◽

S.E. Babcock

Keyword(s):

Grain Boundary ◽

Critical Current Density ◽

Critical Current ◽

Current Density ◽

Electromagnetic Properties ◽

Length Scale ◽

Density Values ◽

Current Densities ◽

Applied Fields ◽

A Current

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.

Download Full-text

Electron microscopy study of shock synthesis of silicides

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151647 ◽

1993 ◽

Vol 51 ◽

pp. 1162-1163

Author(s):

Kenneth S. Vecchio

Keyword(s):

Shock Wave ◽

Plastic Deformation ◽

Close Contact ◽

Microscopy Study ◽

High Energy ◽

Electron Microscopy Study ◽

Powder Materials ◽

Porous Powder ◽

Wave Effects ◽

Wave Passage

Shock-induced reactions (or shock synthesis) have been studied since the 1960’s but are still poorly understood, partly due to the fact that the reaction kinetics are very fast making experimental analysis of the reaction difficult. Shock synthesis is closely related to combustion synthesis, and occurs in the same systems that undergo exothermic gasless combustion reactions. The thermite reaction (Fe2O3 + 2Al -> 2Fe + Al2O3) is prototypical of this class of reactions. The effects of shock-wave passage through porous (powder) materials are complex, because intense and non-uniform plastic deformation is coupled with the shock-wave effects. Thus, the particle interiors experience primarily the effects of shock waves, while the surfaces undergo intense plastic deformation which can often result in interfacial melting. Shock synthesis of compounds from powders is triggered by the extraordinarily high energy deposition rate at the surfaces of the powders, forcing them in close contact, activating them by introducing defects, and heating them close to or even above their melting temperatures.

Download Full-text